vs.

      John Deere 950C LGP vs. John Deere 850J WH LGP

      12 reasons to buy John Deere 950C LGP:

      Standard blade

      Blade angle in both directions 25 degrees and 23.8 degrees 5 % more or 1.2 degrees

      Sizes

      Clearance 482 mm and 409 mm 15 % more or 73 mm

      Operation

      Hydraulic system fluid volume 178 l. and 106 l. 40 % more or 72 l.
      Power unit fluid volume 178 l. and 106 l. 40 % more or 72 l.
      Fuel Capacity 450 l. and 371 l. 18 % more or 79 l.
      Cooling system fluid volume 64.4 l. and 35 l. 46 % more or 29.4 l.

      Motor

      Effective power 171.5 kW and 151 kW 12 % more or 20.5 kW
      Maximum torque 1080.6 Nm and 915 Nm 15 % more or 165.6 Nm
      Displacement 10 l. and 9 l. 10 % more or 1 l.

      Hydraulic system

      Pump bandwidth 292 l/min and 174 l/min 40 % more or 118 l/min

      Gear box

      Maximum forward speed 11 km/h and 10.1 km/h 8 % more or 0.9 km/h
      Maximum reverse gear 11 km/h and 10.1 km/h 8 % more or 0.9 km/h

      8 reasons to buy John Deere 850J WH LGP:

      Standard blade

      Volume 9.9 m3 and 6.3 m3 36 % more or 3.6 m3
      Cut depth 704 mm and 600 mm 15 % more or 104 mm

      Operation

      Generator current strength 80 amperes and 55 amperes 31 % more or 25 amperes
      Engine oil volume 26 l. and 25.5 l. 2 % more or 0.5 l.

      Motor

      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev

      Carrier

      Specific ground pressure 35.5 kPa and 51 kPa 30 % less or 15.5 kPa
      Contact with ground area 6 m2 and 4.7 m2 22 % more or 1.3 m2
      Track shoes number per side 45 and 43 4 % more or 2

      Neutral reasons:

      Standard blade

      Width 4500 mm and 4267 mm
      Height 1350 mm and 1830 mm

      Sizes

      Length with blade 5770 mm and 5728 mm
      Width between caterpillar tracks 2896 mm and 3302 mm
      Height to cab upper part 3305 mm and 3175 mm
      Caterpillar track length on ground level 3275 mm and 3284 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 24600 kg and 22184 kg

      Motor

      Manufacturer Liebherr and John Deere
      Model D 926 TI and 6090HT
      Power measured at 1800 rev / min and 1800 rev / min
      Aspiration Turbocharging with intercooler and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump Variable displacement piston pump with load sensing proportional pump flow control and piston pump
      Overflow valve pressure 16000 kPa and 24993.5 kPa

      Gear box

      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and Hydrostatic with direct drive

      Carrier

      Standard shoe size 710 mm and 914 mm
      Rolling bearings number on either side 8 and 8
      Caterpillar track pitch 215.9 mm and 203 mm
      Track width 2180 mm and 2388 mm

      Images

      Sizes

      1. Length with blade 5770 mm 1. Length with blade 5728 mm
      2. Width between caterpillar tracks 2896 mm 2. Width between caterpillar tracks 3302 mm
      3. Height to cab upper part 3305 mm 3. Height to cab upper part 3175 mm
      4. Caterpillar track length on ground level 3275 mm 4. Caterpillar track length on ground level 3284 mm
      5. Clearance 482 mm 5. Clearance 409 mm

      Carrier

      7. Track width 2180 mm 7. Track width 2388 mm
      8. Standard shoe size 710 mm 8. Standard shoe size 914 mm