vs.

      John Deere 950C LGP vs. Komatsu D60E-6

      6 reasons to buy John Deere 950C LGP:

      Standard blade

      Cut depth 600 mm and 540 mm 10 % more or 60 mm

      Operation

      Fuel Capacity 450 l. and 280 l. 38 % more or 170 l.
      Cooling system fluid volume 64.4 l. and 55 l. 15 % more or 9.4 l.

      Gear box

      Maximum forward speed 11 km/h and 10.9 km/h 1 % more or 0.1 km/h
      Maximum reverse gear 11 km/h and 9.7 km/h 12 % more or 1.3 km/h

      Carrier

      Rolling bearings number on either side 8 and 7 12 % more or 1

      4 reasons to buy Komatsu D60E-6:

      Motor

      Displacement 12.2 l. and 10 l. 18 % more or 2.2 l.

      Gear box

      Forward gears number 5 and 3 40 % more or 2
      Reverse gears number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 48.1 kPa and 51 kPa 6 % less or 2.9 kPa

      Neutral reasons:

      Standard blade

      Height 1350 mm and 1050 mm
      Width 4500 mm and 3970 mm

      Sizes

      Length without blade 4300 mm and 4000 mm
      Width between caterpillar tracks 2896 mm and 2390 mm
      Caterpillar track length on ground level 3275 mm and 2635 mm

      Operation

      Working weight 24600 kg and 13131.5 kg

      Motor

      Model D 926 TI and NH220-CI
      Manufacturer Liebherr and Cummins

      Gear box

      Transmission type Electronically controlled closed loop hydrostatic drive with a split power flow and spur gear with full meshing

      Carrier

      Standard shoe size 710 mm and 510 mm
      Track width 2180 mm and 1880 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2896 mm 2. Width between caterpillar tracks 2390 mm
      4. Caterpillar track length on ground level 3275 mm 4. Caterpillar track length on ground level 2635 mm
      6. Length without blade 4300 mm 6. Length without blade 4000 mm

      Carrier

      7. Track width 2180 mm 7. Track width 1880 mm
      8. Standard shoe size 710 mm 8. Standard shoe size 510 mm