vs.

      John Deere 950J vs. Case 1650K LGP

      14 reasons to buy John Deere 950J:

      Standard blade

      Volume 7.2 m3 and 3.3 m3 54 % more or 3.9 m3
      Cut depth 511 mm and 480 mm 6 % more or 31 mm

      Sizes

      Clearance 533 mm and 370 mm 31 % more or 163 mm

      Operation

      Fuel Capacity 534 l. and 269.9 l. 49 % more or 264.1 l.
      Cooling system fluid volume 62 l. and 34.6 l. 44 % more or 27.4 l.
      Engine oil volume 43 l. and 15.1 l. 65 % more or 27.9 l.
      Hydraulic system fluid volume 189 l. and 62 l. 67 % more or 127 l.
      Final drive fluid volume 19.5 l. and 17.9 l. 8 % more or 1.6 l.
      Generator current strength 80 amperes and 70 amperes 12 % more or 10 amperes

      Motor

      Displacement 10.5 l. and 5.9 l. 44 % more or 4.6 l.
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev
      Effective power 184 kW and 104 kW 43 % more or 80 kW
      Maximum torque 1270 Nm and 649.4 Nm 49 % more or 620.6 Nm

      Hydraulic system

      Pump bandwidth 257 l/min and 120 l/min 53 % more or 137 l/min

      6 reasons to buy Case 1650K LGP:

      Motor

      Power measured at 2200 rev / min and 1600 rev / min 27 % more or 600 rev

      Gear box

      Maximum forward speed 11 km/h and 10.9 km/h 1 % more or 0.1 km/h
      Maximum reverse gear 13 km/h and 10.9 km/h 16 % more or 2.1 km/h

      Carrier

      Specific ground pressure 34.5 kPa and 69.6 kPa 50 % less or 35.1 kPa
      Track shoes number per side 48 and 40 17 % more or 8
      Rolling bearings number on either side 8 and 7 12 % more or 1

      Neutral reasons:

      Standard blade

      Width 3700 mm and 3980 mm
      Height 1550 mm and 1059 mm

      Sizes

      Caterpillar track length on ground level 2997 mm and 2990 mm
      Length with blade 6050 mm and 5318 mm
      Width between caterpillar tracks 2590 mm and 2937 mm
      Height to cab upper part 3430 mm and 3073 mm

      Operation

      Working weight 25565 kg and 16193.2 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Liebherr and Cummins
      Cylinders number 6 and 6
      Model D 936-L A6 and 6BTAA-5.9

      Hydraulic system

      Type of pump alternating axial piston and piston pump

      Gear box

      Transmission type Hydrostatic with direct drive and powershift

      Carrier

      Caterpillar track pitch 216 mm and 176 mm
      Standard shoe size 610 mm and 800 mm
      Track width 1981 mm and 2140 mm

      Images

      Sizes

      1. Length with blade 6050 mm 1. Length with blade 5318 mm
      2. Width between caterpillar tracks 2590 mm 2. Width between caterpillar tracks 2937 mm
      3. Height to cab upper part 3430 mm 3. Height to cab upper part 3073 mm
      4. Caterpillar track length on ground level 2997 mm 4. Caterpillar track length on ground level 2990 mm
      5. Clearance 533 mm 5. Clearance 370 mm

      Carrier

      7. Track width 1981 mm 7. Track width 2140 mm
      8. Standard shoe size 610 mm 8. Standard shoe size 800 mm