vs.

      Komatsu D41E-6 vs. New Holland D180

      5 reasons to buy Komatsu D41E-6:

      Standard blade

      Cut depth 490 mm and 481 mm 2 % more or 9 mm

      Operation

      Engine oil volume 22.8 l. and 19 l. 17 % more or 3.8 l.

      Motor

      Power measured at 2400 rev / min and 2000 rev / min 17 % more or 400 rev

      Carrier

      Specific ground pressure 33.3 kPa and 61.6 kPa 46 % less or 28.3 kPa
      Track shoes number per side 41 and 40 2 % more or 1

      14 reasons to buy New Holland D180:

      Standard blade

      Volume 5.6 m3 and 2.6 m3 54 % more or 3.0 m3

      Sizes

      Clearance 390 mm and 365 mm 6 % more or 25 mm

      Operation

      Generator current strength 70 amperes and 40 amperes 43 % more or 30 amperes
      Fuel Capacity 400 l. and 225 l. 44 % more or 175 l.
      Cooling system fluid volume 30 l. and 28 l. 7 % more or 2 l.
      Hydraulic system fluid volume 110 l. and 37 l. 66 % more or 73 l.
      Final drive fluid volume 18 l. and 13 l. 28 % more or 5 l.

      Motor

      Effective power 134.2 kW and 82 kW 39 % more or 52.2 kW
      Displacement 8.3 l. and 5.9 l. 29 % more or 2.4 l.

      Gear box

      Maximum forward speed 10.6 km/h and 7.6 km/h 28 % more or 3.0 km/h
      Maximum reverse gear 12.7 km/h and 9.4 km/h 26 % more or 3.3 km/h

      Carrier

      Contact with ground area 30.2 m2 and 2.8 m2 91 % more or 27.4 m2
      Rolling bearings number on either side 7 and 6 14 % more or 1
      Support rollers number on either side 2 and 1 50 % more or 1

      Neutral reasons:

      Standard blade

      Width 3045 mm and 3420 mm
      Height 1060 mm and 1425 mm

      Sizes

      Length without blade 3610 mm and 4210 mm
      Length with blade 4880 mm and 5487 mm
      Width between caterpillar tracks 2300 mm and 2460 mm
      Height to cab upper part 2885 mm and 3235 mm
      Caterpillar track length on ground level 2485 mm and 2700 mm

      Operation

      Working weight 11020 kg and 20050 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Komatsu and Cummins
      Model S6D102E-1 and 6CTA8.3
      Cylinders number 6 and 6
      Aspiration turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator)

      Hydraulic system

      Type of pump load sensing, pressure control, with locking in the middle position and variable displacement piston pump
      Overflow valve pressure 20600 kPa and 19000 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type Hydro-Gear switching and Powershift, camshaft, full mesh
      Forward gears number 3 and 3

      Carrier

      Standard shoe size 560 mm and 560 mm
      Track width 1790 mm and 1900 mm

      Images

      Sizes

      1. Length with blade 4880 mm 1. Length with blade 5487 mm
      2. Width between caterpillar tracks 2300 mm 2. Width between caterpillar tracks 2460 mm
      3. Height to cab upper part 2885 mm 3. Height to cab upper part 3235 mm
      4. Caterpillar track length on ground level 2485 mm 4. Caterpillar track length on ground level 2700 mm
      5. Clearance 365 mm 5. Clearance 390 mm
      6. Length without blade 3610 mm 6. Length without blade 4210 mm

      Carrier

      7. Track width 1790 mm 7. Track width 1900 mm
      8. Standard shoe size 560 mm 8. Standard shoe size 560 mm