vs.

      Komatsu D51PX-22 vs. Case 1150K LGP

      10 reasons to buy Komatsu D51PX-22:

      Standard blade

      Blade angle in both directions 28.5 degrees and 17 degrees 40 % more or 11.5 degrees

      Sizes

      Clearance 390 mm and 380 mm 3 % more or 10 mm

      Operation

      Fuel Capacity 270 l. and 246.1 l. 9 % more or 23.9 l.
      Cooling system fluid volume 35 l. and 32.2 l. 8 % more or 2.8 l.
      Engine oil volume 20 l. and 15.5 l. 22 % more or 4.5 l.

      Motor

      Full power 99 kW and 97 kW 2 % more or 2 kW
      Effective power 97 kW and 88 kW 9 % more or 9 kW

      Gear box

      Forward gears number 3 and 1 67 % more or 2
      Reverse gears number 3 and 1 67 % more or 2

      Carrier

      Track shoes number per side 44 and 43 2 % more or 1

      7 reasons to buy Case 1150K LGP:

      Standard blade

      Volume 3.2 m3 and 2.9 m3 9 % more or 0.3 m3
      Cut depth 480 mm and 456 mm 5 % more or 24 mm

      Operation

      Generator current strength 65 amperes and 60 amperes 8 % more or 5 amperes
      Hydraulic system fluid volume 98.4 l. and 63 l. 36 % more or 35.4 l.

      Hydraulic system

      Pump bandwidth 132.1 l/min and 99 l/min 25 % more or 33.1 l/min

      Gear box

      Maximum forward speed 9.7 km/h and 9 km/h 7 % more or 0.7 km/h
      Maximum reverse gear 9.7 km/h and 9 km/h 7 % more or 0.7 km/h

      Neutral reasons:

      Standard blade

      Height 1110 mm and 1120 mm
      Width 3350 mm and 3350 mm

      Sizes

      Length with blade 4800 mm and 5030 mm
      Height to cab upper part 3002 mm and 2840 mm
      Caterpillar track length on ground level 2736 mm and 2590 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 13100 kg and 13319.7 kg

      Motor

      Manufacturer Komatsu and Case
      Model SAA6D107E-1 and 667TA/EDJ
      Power measured at 2200 rev / min and 2200 rev / min
      Displacement 6.7 l. and 6.7 l.
      Aspiration Turbocharged engine with subsequent cooling of charging air by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)
      Cylinders number 6 and 6

      Hydraulic system

      Overflow valve pressure 27461.8 kPa and 19512.1 kPa

      Gear box

      Transmission type dual path hydrostatic transmission and Hydro-Static Transmission

      Carrier

      Standard shoe size 710 mm and 863.6 mm
      Rolling bearings number on either side 7 and 7
      Track width 1880 mm and 1980 mm

      Images

      Sizes

      1. Length with blade 4800 mm 1. Length with blade 5030 mm
      3. Height to cab upper part 3002 mm 3. Height to cab upper part 2840 mm
      4. Caterpillar track length on ground level 2736 mm 4. Caterpillar track length on ground level 2590 mm
      5. Clearance 390 mm 5. Clearance 380 mm

      Carrier

      7. Track width 1880 mm 7. Track width 1980 mm
      8. Standard shoe size 710 mm 8. Standard shoe size 863.6 mm