vs.

      Komatsu D61PX-12 vs. John Deere 450E/6415

      16 reasons to buy Komatsu D61PX-12:

      Operation

      Fuel Capacity 315 l. and 117.3 l. 63 % more or 197.7 l.
      Cooling system fluid volume 44 l. and 15 l. 66 % more or 29 l.
      Engine oil volume 19 l. and 14.2 l. 25 % more or 4.8 l.
      Hydraulic system fluid volume 48 l. and 36 l. 25 % more or 12 l.
      Power unit fluid volume 44 l. and 30.3 l. 31 % more or 13.7 l.
      Final drive fluid volume 28.5 l. and 5.9 l. 79 % more or 22.6 l.

      Motor

      Displacement 8.3 l. and 4.5 l. 46 % more or 3.8 l.
      Torque measured at 1300 rev / min and 1200 rev / min 8 % more or 100 rev
      Effective power 113.3 kW and 52.2 kW 54 % more or 61.1 kW
      Cylinders number 6 and 4 33 % more or 2
      Maximum torque 784 Nm and 309.1 Nm 61 % more or 474.9 Nm

      Gear box

      Maximum reverse gear 12.8 km/h and 9.9 km/h 23 % more or 2.9 km/h

      Carrier

      Specific ground pressure 32 kPa and 38.6 kPa 17 % less or 6.6 kPa
      Contact with ground area 5.5 m2 and 1.7 m2 69 % more or 3.8 m2
      Track shoes number per side 46 and 36 22 % more or 10
      Rolling bearings number on either side 8 and 1 87 % more or 7

      4 reasons to buy John Deere 450E/6415:

      Motor

      Power measured at 2100 rev / min and 1850 rev / min 12 % more or 250 rev

      Gear box

      Forward gears number 4 and 3 25 % more or 1
      Reverse gears number 4 and 3 25 % more or 1
      Maximum forward speed 10.4 km/h and 10.3 km/h 1 % more or 0.1 km/h

      Neutral reasons:

      Standard blade

      Height 1160 mm and 813 mm
      Blade angle in both directions 25 degrees and 25 degrees
      Width 3860 mm and 2440 mm

      Sizes

      Height to cab upper part 3115 mm and 2560 mm
      Caterpillar track length on ground level 3170 mm and 1850 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 17800 kg and 6655 kg

      Motor

      Model S6D114E-1 and 4-276D
      Manufacturer Komatsu and John Deere

      Hydraulic system

      Type of pump load sensing, pressure control, with locking in the middle position and gear type pump
      Overflow valve pressure 20600 kPa and 15514 kPa

      Gear box

      Transmission type TORQFLOW and H-L-4: 4-speed ranges, with high, reduced reverse speed, switched hydraulically without a clutch in each range

      Carrier

      Standard shoe size 860 mm and 457 mm

      Images

      Sizes

      3. Height to cab upper part 3115 mm 3. Height to cab upper part 2560 mm
      4. Caterpillar track length on ground level 3170 mm 4. Caterpillar track length on ground level 1850 mm

      Carrier

      8. Standard shoe size 860 mm 8. Standard shoe size 457 mm