- Home/
- Comparison/
- Tracked Tractor/
- Komatsu D80E-18 vs. John Deere 450H LT
Komatsu D80E-18 vs. John Deere 450H LT
7 reasons to buy Komatsu D80E-18:
Standard blade
| Volume | 6.4 m3 and 1.4 m3 | 78 % more or 5.0 m3 |
Operation
| Fuel Capacity | 450 l. and 136 l. | 70 % more or 314 l. |
| Cooling system fluid volume | 79 l. and 16 l. | 80 % more or 63 l. |
Motor
| Full power | 164.1 kW and 54.5 kW | 67 % more or 109.6 kW |
| Displacement | 14 l. and 4.5 l. | 68 % more or 9.5 l. |
Gear box
| Maximum reverse gear | 9.4 km/h and 8 km/h | 15 % more or 1.4 km/h |
Carrier
| Rolling bearings number on either side | 7 and 6 | 14 % more or 1 |
3 reasons to buy John Deere 450H LT:
Standard blade
| Cut depth | 528 mm and 490 mm | 7 % more or 38 mm |
Gear box
| Maximum forward speed | 8 km/h and 7.9 km/h | 1 % more or 0.1 km/h |
Carrier
| Specific ground pressure | 38.6 kPa and 54.5 kPa | 29 % less or 15.9 kPa |
Neutral reasons:
Standard blade
| Width | 3725 mm and 2286 mm |
| Height | 1315 mm and 826 mm |
Sizes
| Length without blade | 4385 mm and 4013 mm |
| Width between caterpillar tracks | 2620 mm and 406 mm |
| Height to cab upper part | 3395 mm and 2590 mm |
| Caterpillar track length on ground level | 2730 mm and 2184 mm |
Operation
| Working weight | 19005.5 kg and 7045 kg |
Motor
| Manufacturer | Cummins and John Deere |
| Model | NT-855 and e 4045D |
Gear box
| Transmission type | spur gear with full meshing and Electronically controlled hydrostatic drive with a split power flow |
Carrier
| Standard shoe size | 560 mm and 406 mm |
Images
Sizes
| 2. Width between caterpillar tracks | 2620 mm | 2. Width between caterpillar tracks | 406 mm |
| 3. Height to cab upper part | 3395 mm | 3. Height to cab upper part | 2590 mm |
| 4. Caterpillar track length on ground level | 2730 mm | 4. Caterpillar track length on ground level | 2184 mm |
| 6. Length without blade | 4385 mm | 6. Length without blade | 4013 mm |
Carrier
| 8. Standard shoe size | 560 mm | 8. Standard shoe size | 406 mm |