- Home/
- Comparison/
- Tracked Tractor/
- Liebherr LR632B L vs. New Holland D95 WT
Liebherr LR632B L vs. New Holland D95 WT
13 reasons to buy Liebherr LR632B L:
Standard blade
Volume | 5.6 m3 and 1.9 m3 | 66 % more or 3.7 m3 |
Cut depth | 536 mm and 483 mm | 10 % more or 53 mm |
Sizes
Clearance | 494 mm and 379 mm | 23 % more or 115 mm |
Operation
Fuel Capacity | 400 l. and 189.3 l. | 53 % more or 210.7 l. |
Cooling system fluid volume | 62 l. and 18.9 l. | 70 % more or 43.1 l. |
Engine oil volume | 43 l. and 15.8 l. | 63 % more or 27.2 l. |
Hydraulic system fluid volume | 162 l. and 75.7 l. | 53 % more or 86.3 l. |
Final drive fluid volume | 16 l. and 14.2 l. | 11 % more or 1.8 l. |
Generator current strength | 80 amperes and 65 amperes | 19 % more or 15 amperes |
Motor
Full power | 150 kW and 73.8 kW | 51 % more or 76.2 kW |
Displacement | 10.5 l. and 6.7 l. | 36 % more or 3.8 l. |
Hydraulic system
Pump bandwidth | 209 l/min and 76.8 l/min | 63 % more or 132.2 l/min |
Gear box
Maximum forward speed | 11 km/h and 9.7 km/h | 12 % more or 1.3 km/h |
4 reasons to buy New Holland D95 WT:
Standard blade
Blade angle in both directions | 25 degrees and 10 degrees | 60 % more or 15 degrees |
Motor
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Gear box
Forward gears number | 10 Total and 3 | 70 % more or 7 Total |
Carrier
Specific ground pressure | 31.3 kPa and 69.6 kPa | 55 % less or 38.3 kPa |
Neutral reasons:
Standard blade
Width | 3372 mm and 3050 mm |
Height | 1400 mm and 910 mm |
Sizes
Caterpillar track length on ground level | 2830 mm and 2360 mm |
Length without blade | 4335 mm and 3263 mm |
Width between caterpillar tracks | 2381 mm and 2820 mm |
Height to cab upper part | 3258 mm and 2773 mm |
Operation
Working weight | 20398 kg and 9163 kg |
Operating voltage | 24 V and 12 V |
Motor
Manufacturer | Liebherr and New Holland |
Model | D 936 L A6 and 667T/M2 |
Aspiration | turbocharging and natural aspiration |
Cylinders number | 6 and 6 |
Hydraulic system
Type of pump | variable displacement piston pump of axial cam type and gear type pump |
Gear box
Transmission type | Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body and Hydro-Static Transmission |
Carrier
Standard shoe size | 508 mm and 610 mm |
Rolling bearings number on either side | 7 and 7 |
Images
Sizes
6. Length without blade | 4335 mm | 6. Length without blade | 3263 mm |
2. Width between caterpillar tracks | 2381 mm | 2. Width between caterpillar tracks | 2820 mm |
3. Height to cab upper part | 3258 mm | 3. Height to cab upper part | 2773 mm |
4. Caterpillar track length on ground level | 2830 mm | 4. Caterpillar track length on ground level | 2360 mm |
5. Clearance | 494 mm | 5. Clearance | 379 mm |
Carrier
8. Standard shoe size | 508 mm | 8. Standard shoe size | 610 mm |