vs.

      Liebherr PR724 L vs. Case 850H LGP

      14 reasons to buy Liebherr PR724 L:

      Standard blade

      Volume 3.2 m3 and 2 m3 37 % more or 1.2 m3
      Cut depth 520 mm and 457 mm 12 % more or 63 mm

      Sizes

      Clearance 475 mm and 404 mm 15 % more or 71 mm

      Operation

      Final drive fluid volume 18.5 l. and 7.1 l. 62 % more or 11.4 l.
      Engine oil volume 19 l. and 15.2 l. 20 % more or 3.8 l.
      Hydraulic system fluid volume 162 l. and 52.5 l. 68 % more or 109.5 l.
      Fuel Capacity 365 l. and 177.9 l. 51 % more or 187.1 l.
      Cooling system fluid volume 30 l. and 18.9 l. 37 % more or 11.1 l.

      Motor

      Full power 119.3 kW and 72.3 kW 39 % more or 47.0 kW
      Effective power 117.8 kW and 67.9 kW 42 % more or 49.9 kW
      Displacement 6.6 l. and 5.9 l. 11 % more or 0.7 l.

      Hydraulic system

      Pump bandwidth 174 l/min and 90.5 l/min 48 % more or 83.5 l/min

      Gear box

      Maximum forward speed 11 km/h and 9 km/h 18 % more or 2 km/h

      Carrier

      Rolling bearings number on either side 7 and 6 14 % more or 1

      6 reasons to buy Case 850H LGP:

      Standard blade

      Blade angle in both directions 25 degrees and 23 degrees 8 % more or 2 degrees

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum reverse gear 9.9 km/h and 7.8 km/h 21 % more or 2.1 km/h

      Carrier

      Track shoes number per side 38 and 2 95 % more or 36

      Neutral reasons:

      Standard blade

      Width 3204 mm and 3150 mm
      Height 1200 mm and 914 mm

      Sizes

      Width between caterpillar tracks 2648 mm and 2260 mm
      Height to cab upper part 3197 mm and 2890 mm
      Caterpillar track length on ground level 2830 mm and 2240 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 16660 kg and 8713.1 kg

      Motor

      Manufacturer Liebherr and Case
      Model D 924 TI-E and 6T-590

      Hydraulic system

      Overflow valve pressure 19994.8 kPa and 15168.5 kPa

      Gear box

      Transmission type Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body and Case full mesh modulated

      Carrier

      Standard shoe size 609.6 mm and 711.2 mm
      Track width 1800 mm and 1800 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2648 mm 2. Width between caterpillar tracks 2260 mm
      3. Height to cab upper part 3197 mm 3. Height to cab upper part 2890 mm
      4. Caterpillar track length on ground level 2830 mm 4. Caterpillar track length on ground level 2240 mm
      5. Clearance 475 mm 5. Clearance 404 mm

      Carrier

      7. Track width 1800 mm 7. Track width 1800 mm
      8. Standard shoe size 609.6 mm 8. Standard shoe size 711.2 mm