vs.

      Liebherr PR724 L vs. Dressta TD10M

      14 reasons to buy Liebherr PR724 L:

      Standard blade

      Cut depth 520 mm and 305 mm 41 % more or 215 mm
      Volume 3.2 m3 and 2 m3 37 % more or 1.2 m3

      Sizes

      Clearance 475 mm and 381 mm 20 % more or 94 mm

      Operation

      Cooling system fluid volume 30 l. and 24.9 l. 17 % more or 5.1 l.
      Engine oil volume 19 l. and 10.4 l. 45 % more or 8.6 l.
      Hydraulic system fluid volume 162 l. and 70 l. 57 % more or 92 l.
      Final drive fluid volume 18.5 l. and 15.1 l. 18 % more or 3.4 l.
      Fuel Capacity 365 l. and 170 l. 53 % more or 195 l.

      Motor

      Full power 119.3 kW and 82 kW 31 % more or 37.3 kW
      Effective power 117.8 kW and 76 kW 35 % more or 41.8 kW
      Displacement 6.6 l. and 4.5 l. 32 % more or 2.1 l.

      Hydraulic system

      Pump bandwidth 174 l/min and 75.2 l/min 57 % more or 98.8 l/min

      Gear box

      Maximum forward speed 11 km/h and 10 km/h 9 % more or 1 km/h

      Carrier

      Rolling bearings number on either side 7 and 6 14 % more or 1

      5 reasons to buy Dressta TD10M:

      Standard blade

      Blade angle in both directions 25 degrees and 23 degrees 8 % more or 2 degrees

      Motor

      Power measured at 2500 rev / min and 1800 rev / min 28 % more or 700 rev

      Gear box

      Maximum reverse gear 11.9 km/h and 7.8 km/h 34 % more or 4.1 km/h

      Carrier

      Specific ground pressure 38.6 kPa and 47.1 kPa 18 % less or 8.5 kPa
      Track shoes number per side 39 and 2 95 % more or 37

      Neutral reasons:

      Standard blade

      Width 3204 mm and 282 mm
      Height 1200 mm and 990 mm

      Sizes

      Length without blade 4170 mm and 4800 mm
      Height to cab upper part 3197 mm and 2720 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 16660 kg and 8797 kg

      Motor

      Manufacturer Liebherr and Cummins
      Cylinders number 4 and 4
      Model D 924 TI-E and QSB4.5
      Aspiration Direct injection with turbocharging and turbocharging

      Hydraulic system

      Type of pump piston pump of axial cam type and Pump with double gear
      Overflow valve pressure 19994.8 kPa and 15512 kPa

      Gear box

      Transmission type Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body and Powershift of modular camshaft, of electrohydraulic action

      Carrier

      Standard shoe size 609.6 mm and 508 mm

      Images

      Sizes

      3. Height to cab upper part 3197 mm 3. Height to cab upper part 2720 mm
      5. Clearance 475 mm 5. Clearance 381 mm
      6. Length without blade 4170 mm 6. Length without blade 4800 mm

      Carrier

      8. Standard shoe size 609.6 mm 8. Standard shoe size 508 mm