vs.

      Liebherr PR724 L vs. John Deere 550H LGP

      13 reasons to buy Liebherr PR724 L:

      Standard blade

      Volume 3.2 m3 and 1.8 m3 44 % more or 1.4 m3
      Blade angle in both directions 23 degrees and 22.2 degrees 3 % more or 0.8 degrees

      Sizes

      Clearance 475 mm and 345 mm 27 % more or 130 mm

      Operation

      Final drive fluid volume 18.5 l. and 6.6 l. 64 % more or 11.9 l.
      Fuel Capacity 365 l. and 178 l. 51 % more or 187 l.
      Cooling system fluid volume 30 l. and 16 l. 47 % more or 14 l.
      Engine oil volume 19 l. and 14 l. 26 % more or 5 l.
      Hydraulic system fluid volume 162 l. and 32.2 l. 80 % more or 129.8 l.

      Motor

      Effective power 117.8 kW and 62.6 kW 47 % more or 55.2 kW
      Displacement 6.6 l. and 4.5 l. 32 % more or 2.1 l.

      Hydraulic system

      Pump bandwidth 174 l/min and 56.8 l/min 67 % more or 117.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 8 km/h 27 % more or 3 km/h

      Carrier

      Rolling bearings number on either side 7 and 6 14 % more or 1

      6 reasons to buy John Deere 550H LGP:

      Standard blade

      Cut depth 523 mm and 520 mm 1 % more or 3 mm

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Gear box

      Maximum reverse gear 8 km/h and 7.8 km/h 2 % more or 0.2 km/h

      Carrier

      Specific ground pressure 29 kPa and 47.1 kPa 38 % less or 18.1 kPa
      Track shoes number per side 40 and 2 95 % more or 38

      Neutral reasons:

      Standard blade

      Width 3204 mm and 2921 mm
      Height 1200 mm and 826 mm

      Sizes

      Length without blade 4170 mm and 4040 mm
      Width between caterpillar tracks 2648 mm and 2362 mm
      Height to cab upper part 3197 mm and 2743 mm
      Caterpillar track length on ground level 2830 mm and 2184 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 16660 kg and 7437 kg

      Motor

      Manufacturer Liebherr and John Deere
      Model D 924 TI-E and 4045T
      Aspiration Direct injection with turbocharging and Turbocharging with atmospheric pressure compensation
      Cylinders number 4 and 4

      Hydraulic system

      Type of pump piston pump of axial cam type and gear type pump
      Overflow valve pressure 19994.8 kPa and 20685 kPa

      Gear box

      Transmission type Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body and Electronically controlled hydrostatic drive with a split power flow

      Carrier

      Standard shoe size 609.6 mm and 610 mm

      Images

      Sizes

      4. Caterpillar track length on ground level 2830 mm 4. Caterpillar track length on ground level 2184 mm
      5. Clearance 475 mm 5. Clearance 345 mm
      6. Length without blade 4170 mm 6. Length without blade 4040 mm
      2. Width between caterpillar tracks 2648 mm 2. Width between caterpillar tracks 2362 mm
      3. Height to cab upper part 3197 mm 3. Height to cab upper part 2743 mm

      Carrier

      8. Standard shoe size 609.6 mm 8. Standard shoe size 610 mm