vs.

      Liebherr PR724 XL vs. New Holland D95 WT

      13 reasons to buy Liebherr PR724 XL:

      Standard blade

      Cut depth 497 mm and 483 mm 3 % more or 14 mm
      Volume 3.2 m3 and 1.9 m3 41 % more or 1.3 m3

      Sizes

      Clearance 475 mm and 379 mm 20 % more or 96 mm

      Operation

      Fuel Capacity 365 l. and 189.3 l. 48 % more or 175.7 l.
      Cooling system fluid volume 30 l. and 18.9 l. 37 % more or 11.1 l.
      Engine oil volume 19 l. and 15.8 l. 17 % more or 3.2 l.
      Hydraulic system fluid volume 162 l. and 75.7 l. 53 % more or 86.3 l.
      Final drive fluid volume 18.5 l. and 14.2 l. 23 % more or 4.3 l.

      Motor

      Full power 119.3 kW and 73.8 kW 38 % more or 45.5 kW
      Effective power 117.8 kW and 71.6 kW 39 % more or 46.2 kW

      Hydraulic system

      Pump bandwidth 174 l/min and 76.8 l/min 56 % more or 97.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.7 km/h 12 % more or 1.3 km/h

      Carrier

      Rolling bearings number on either side 8 and 7 12 % more or 1

      8 reasons to buy New Holland D95 WT:

      Standard blade

      Blade angle in both directions 25 degrees and 23 degrees 8 % more or 2 degrees

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Displacement 6.7 l. and 6.6 l. 1 % more or 0.1 l.
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Forward gears number 10 Total and 3 70 % more or 7 Total

      Carrier

      Specific ground pressure 31.3 kPa and 43.2 kPa 28 % less or 11.9 kPa
      Track shoes number per side 40 and 2 95 % more or 38

      Neutral reasons:

      Standard blade

      Width 3204 mm and 3050 mm
      Height 1200 mm and 910 mm

      Sizes

      Width between caterpillar tracks 2648 mm and 2820 mm
      Length without blade 4170 mm and 3263 mm
      Height to cab upper part 3197 mm and 2773 mm
      Caterpillar track length on ground level 3210 mm and 2360 mm

      Operation

      Working weight 17295 kg and 9163 kg
      Operating voltage 24 V and 12 V

      Motor

      Model D 924 TI-E and 667T/M2
      Aspiration Direct injection with turbocharging and natural aspiration
      Manufacturer Liebherr and New Holland

      Hydraulic system

      Type of pump piston pump of axial cam type and gear type pump

      Gear box

      Transmission type Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body and Hydro-Static Transmission

      Carrier

      Standard shoe size 609.6 mm and 610 mm
      Track width 1800 mm and 1780 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2648 mm 2. Width between caterpillar tracks 2820 mm
      3. Height to cab upper part 3197 mm 3. Height to cab upper part 2773 mm
      4. Caterpillar track length on ground level 3210 mm 4. Caterpillar track length on ground level 2360 mm
      5. Clearance 475 mm 5. Clearance 379 mm
      6. Length without blade 4170 mm 6. Length without blade 3263 mm

      Carrier

      7. Track width 1800 mm 7. Track width 1780 mm
      8. Standard shoe size 609.6 mm 8. Standard shoe size 610 mm