vs.

      New Holland 255 vs. Dressta TD10M LGP

      17 reasons to buy New Holland 255:

      Standard blade

      Volume 7 m3 and 2 m3 71 % more or 5 m3
      Cut depth 530 mm and 305 mm 42 % more or 225 mm

      Sizes

      Clearance 460 mm and 381 mm 17 % more or 79 mm

      Operation

      Hydraulic system fluid volume 105 l. and 70 l. 33 % more or 35 l.
      Engine oil volume 22 l. and 10.4 l. 53 % more or 11.6 l.
      Final drive fluid volume 46 l. and 15.1 l. 67 % more or 30.9 l.
      Fuel Capacity 500 l. and 170 l. 66 % more or 330 l.
      Cooling system fluid volume 65 l. and 24.9 l. 62 % more or 40.1 l.

      Motor

      Effective power 179 kW and 76 kW 58 % more or 103 kW
      Displacement 8.3 l. and 4.5 l. 46 % more or 3.8 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 212 l/min and 75.2 l/min 65 % more or 136.8 l/min

      Gear box

      Maximum forward speed 10.9 km/h and 10 km/h 8 % more or 0.9 km/h
      Maximum reverse gear 12.6 km/h and 11.9 km/h 6 % more or 0.7 km/h

      Carrier

      Contact with ground area 32.7 m2 and 2.7 m2 92 % more or 30.0 m2
      Track shoes number per side 41 and 39 5 % more or 2
      Rolling bearings number on either side 7 and 6 14 % more or 1

      3 reasons to buy Dressta TD10M LGP:

      Standard blade

      Blade angle in both directions 25 degrees and 11 degrees 56 % more or 14 degrees

      Motor

      Power measured at 2500 rev / min and 2200 rev / min 12 % more or 300 rev
      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev

      Neutral reasons:

      Standard blade

      Width 3800 mm and 2820 mm
      Height 1500 mm and 990 mm

      Sizes

      Length without blade 4490 mm and 4800 mm
      Width between caterpillar tracks 2940 mm and 2570 mm
      Height to cab upper part 3420 mm and 2720 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 26600 kg and 8910 kg

      Motor

      Manufacturer Cummins and Cummins
      Model 6C6TAA 8.3 and QSB4.5
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and 4-stroke diesel engine turbocharging, ECM, direct run, direct injection

      Hydraulic system

      Overflow valve pressure 19000 kPa and 15512 kPa
      Type of pump gear type pump and Pump with double gear

      Gear box

      Transmission type Powershift, camshaft, full mesh and Powershift of modular camshaft, of electrohydraulic action
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 550 mm and 610 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2940 mm 2. Width between caterpillar tracks 2570 mm
      3. Height to cab upper part 3420 mm 3. Height to cab upper part 2720 mm
      5. Clearance 460 mm 5. Clearance 381 mm
      6. Length without blade 4490 mm 6. Length without blade 4800 mm

      Carrier

      8. Standard shoe size 550 mm 8. Standard shoe size 610 mm