vs.

      New Holland D150 XLT vs. Komatsu D31PX-22

      17 reasons to buy New Holland D150 XLT:

      Standard blade

      Cut depth 490 mm and 390 mm 20 % more or 100 mm
      Volume 3.2 m3 and 1.6 m3 50 % more or 1.6 m3

      Sizes

      Clearance 370 mm and 315 mm 15 % more or 55 mm

      Operation

      Fuel Capacity 270 l. and 195 l. 28 % more or 75 l.
      Cooling system fluid volume 25 l. and 18 l. 28 % more or 7 l.
      Engine oil volume 14.2 l. and 11 l. 23 % more or 3.2 l.
      Hydraulic system fluid volume 63 l. and 60 l. 5 % more or 3 l.
      Final drive fluid volume 26 l. and 3.5 l. 87 % more or 22.5 l.
      Generator current strength 70 amperes and 35 amperes 50 % more or 35 amperes

      Motor

      Displacement 5.9 l. and 3.3 l. 44 % more or 2.6 l.
      Effective power 104.4 kW and 58.2 kW 44 % more or 46.2 kW
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 11 km/h and 8.5 km/h 23 % more or 2.5 km/h
      Maximum reverse gear 13 km/h and 8.5 km/h 35 % more or 4.5 km/h

      Carrier

      Contact with ground area 29.9 m2 and 2.6 m2 91 % more or 27.3 m2
      Track shoes number per side 48 and 40 17 % more or 8
      Rolling bearings number on either side 8 and 6 25 % more or 2

      2 reasons to buy Komatsu D31PX-22:

      Standard blade

      Blade angle in both directions 25 degrees and 5 degrees 80 % more or 20 degrees

      Carrier

      Specific ground pressure 32.3 kPa and 51 kPa 37 % less or 18.7 kPa

      Neutral reasons:

      Standard blade

      Width 3200 mm and 3250 mm
      Height 1100 mm and 750 mm

      Sizes

      Length with blade 5315 mm and 4155 mm
      Width between caterpillar tracks 2400 mm and 2250 mm
      Height to cab upper part 3080 mm and 2760 mm
      Caterpillar track length on ground level 2985 mm and 2185 mm

      Operation

      Working weight 15680 kg and 8540 kg
      Operating voltage 24 V and 24 V

      Motor

      Manufacturer Cummins and Komatsu
      Power measured at 2200 rev / min and 2200 rev / min
      Model 6BTAA5.9 and SAA4D95LE-5
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging, subsequent cooling of charging air by oncoming air flow

      Hydraulic system

      Type of pump variable displacement piston pump and piston pump
      Overflow valve pressure 19000 kPa and 27461.8 kPa

      Gear box

      Reverse gears number 3 and 3
      Transmission type Powershift, camshaft, full mesh and dual path hydrostatic transmission
      Forward gears number 3 and 3

      Carrier

      Standard shoe size 500 mm and 600 mm
      Track width 1900 mm and 1650 mm

      Images

      Sizes

      1. Length with blade 5315 mm 1. Length with blade 4155 mm
      2. Width between caterpillar tracks 2400 mm 2. Width between caterpillar tracks 2250 mm
      3. Height to cab upper part 3080 mm 3. Height to cab upper part 2760 mm
      4. Caterpillar track length on ground level 2985 mm 4. Caterpillar track length on ground level 2185 mm
      5. Clearance 370 mm 5. Clearance 315 mm

      Carrier

      7. Track width 1900 mm 7. Track width 1650 mm
      8. Standard shoe size 500 mm 8. Standard shoe size 600 mm