vs.

      New Holland D150 vs. John Deere 850C WT

      6 reasons to buy New Holland D150:

      Operation

      Final drive fluid volume 26 l. and 12.3 l. 53 % more or 13.7 l.
      Generator current strength 70 amperes and 45 amperes 36 % more or 25 amperes

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Gear box

      Maximum reverse gear 13 km/h and 11 km/h 15 % more or 2 km/h

      Carrier

      Contact with ground area 25.5 m2 and 4.2 m2 84 % more or 21.3 m2
      Track shoes number per side 43 and 40 7 % more or 3

      12 reasons to buy John Deere 850C WT:

      Standard blade

      Cut depth 513 mm and 406 mm 21 % more or 107 mm
      Volume 6.2 m3 and 3.1 m3 50 % more or 3.1 m3
      Blade angle in both directions 25 degrees and 10 degrees 60 % more or 15 degrees

      Sizes

      Clearance 406 mm and 370 mm 9 % more or 36 mm

      Operation

      Fuel Capacity 348 l. and 270 l. 22 % more or 78 l.
      Cooling system fluid volume 34 l. and 25 l. 26 % more or 9 l.
      Engine oil volume 32.2 l. and 14.2 l. 56 % more or 18.0 l.
      Hydraulic system fluid volume 79.5 l. and 63 l. 21 % more or 16.5 l.

      Motor

      Maximum torque 814.8 Nm and 650 Nm 20 % more or 164.8 Nm
      Displacement 8.1 l. and 5.9 l. 27 % more or 2.2 l.
      Effective power 138 kW and 104.4 kW 24 % more or 33.6 kW

      Carrier

      Specific ground pressure 43.4 kPa and 57.9 kPa 25 % less or 14.5 kPa

      Neutral reasons:

      Standard blade

      Width 3180 mm and 3556 mm
      Height 1100 mm and 1435 mm

      Sizes

      Width between caterpillar tracks 2400 mm and 3556 mm
      Height to cab upper part 3080 mm and 3151 mm
      Caterpillar track length on ground level 2550 mm and 2743 mm

      Operation

      Working weight 14860 kg and 18668 kg
      Operating voltage 24 V and 24 V

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and Turbocharging with atmospheric pressure compensation, with the charge air cooling
      Cylinders number 6 and 6
      Manufacturer Cummins and John Deere
      Model 6BTAA5.9 and 6081A

      Hydraulic system

      Type of pump variable displacement piston pump and gear type pump
      Overflow valve pressure 19000 kPa and 15514 kPa

      Gear box

      Maximum forward speed 11 km/h and 11 km/h
      Transmission type Powershift, camshaft, full mesh and Automatic, hydrostatic drive with a split power flow

      Carrier

      Standard shoe size 500 mm and 762 mm
      Rolling bearings number on either side 7 and 7

      Images

      Sizes

      2. Width between caterpillar tracks 2400 mm 2. Width between caterpillar tracks 3556 mm
      3. Height to cab upper part 3080 mm 3. Height to cab upper part 3151 mm
      4. Caterpillar track length on ground level 2550 mm 4. Caterpillar track length on ground level 2743 mm
      5. Clearance 370 mm 5. Clearance 406 mm

      Carrier

      8. Standard shoe size 500 mm 8. Standard shoe size 762 mm