vs.

      New Holland D180 XLT vs. Liebherr PR742B

      8 reasons to buy New Holland D180 XLT:

      Standard blade

      Cut depth 550 mm and 525 mm 5 % more or 25 mm

      Operation

      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Gear box

      Reverse gears number 3 and 2 33 % more or 1
      Maximum reverse gear 12.7 km/h and 7.8 km/h 39 % more or 4.9 km/h

      Carrier

      Specific ground pressure 56.8 kPa and 75.5 kPa 25 % less or 18.7 kPa
      Contact with ground area 35.9 m2 and 3 m2 92 % more or 32.9 m2
      Rolling bearings number on either side 8 and 7 12 % more or 1

      11 reasons to buy Liebherr PR742B:

      Standard blade

      Volume 6.4 m3 and 5.6 m3 12 % more or 0.8 m3

      Sizes

      Clearance 482 mm and 390 mm 19 % more or 92 mm

      Operation

      Cooling system fluid volume 62 l. and 30 l. 52 % more or 32 l.
      Engine oil volume 22 l. and 19 l. 14 % more or 3 l.
      Hydraulic system fluid volume 189 l. and 110 l. 42 % more or 79 l.
      Final drive fluid volume 23 l. and 18 l. 22 % more or 5 l.
      Fuel Capacity 450 l. and 400 l. 11 % more or 50 l.

      Motor

      Displacement 10 l. and 8.3 l. 17 % more or 1.7 l.
      Effective power 174.5 kW and 134.2 kW 23 % more or 40.3 kW

      Hydraulic system

      Pump bandwidth 291.5 l/min and 165 l/min 43 % more or 126.5 l/min

      Gear box

      Maximum forward speed 11 km/h and 10.6 km/h 4 % more or 0.4 km/h

      Neutral reasons:

      Standard blade

      Width 3420 mm and 3990 mm
      Height 1425 mm and 1450 mm

      Sizes

      Length without blade 4210 mm and 4300 mm
      Length with blade 5878 mm and 5460 mm
      Width between caterpillar tracks 2460 mm and 2680 mm
      Height to cab upper part 3235 mm and 3305 mm
      Caterpillar track length on ground level 3205 mm and 2960 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 20800 kg and 23133.2 kg

      Motor

      Manufacturer Cummins and Liebherr
      Cylinders number 6 and 6
      Model 6CTA8.3 and D 926 TI-E
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging

      Hydraulic system

      Overflow valve pressure 19000 kPa and 15995.8 kPa
      Type of pump variable displacement piston pump and proportional flow control of the pump with load sensing

      Gear box

      Forward gears number 3 and 3

      Carrier

      Standard shoe size 560 mm and 508 mm
      Track width 1900 mm and 1980 mm

      Images

      Sizes

      1. Length with blade 5878 mm 1. Length with blade 5460 mm
      2. Width between caterpillar tracks 2460 mm 2. Width between caterpillar tracks 2680 mm
      3. Height to cab upper part 3235 mm 3. Height to cab upper part 3305 mm
      4. Caterpillar track length on ground level 3205 mm 4. Caterpillar track length on ground level 2960 mm
      5. Clearance 390 mm 5. Clearance 482 mm
      6. Length without blade 4210 mm 6. Length without blade 4300 mm

      Carrier

      7. Track width 1900 mm 7. Track width 1980 mm
      8. Standard shoe size 560 mm 8. Standard shoe size 508 mm