vs.

      New Holland D180 vs. Caterpillar D4C serie III Hydrostat

      17 reasons to buy New Holland D180:

      Standard blade

      Volume 5.6 m3 and 1.7 m3 70 % more or 3.9 m3
      Cut depth 481 mm and 448 mm 7 % more or 33 mm

      Sizes

      Clearance 390 mm and 374 mm 4 % more or 16 mm

      Operation

      Hydraulic system fluid volume 110 l. and 56.8 l. 48 % more or 53.2 l.
      Final drive fluid volume 18 l. and 14.7 l. 18 % more or 3.3 l.
      Fuel Capacity 400 l. and 157 l. 61 % more or 243 l.
      Cooling system fluid volume 30 l. and 21 l. 30 % more or 9 l.
      Generator current strength 70 amperes and 55 amperes 21 % more or 15 amperes
      Engine oil volume 19 l. and 13 l. 32 % more or 6 l.

      Motor

      Effective power 134.2 kW and 60.4 kW 55 % more or 73.8 kW
      Displacement 8.3 l. and 5 l. 40 % more or 3.3 l.

      Hydraulic system

      Pump bandwidth 165 l/min and 66.6 l/min 60 % more or 98.4 l/min

      Gear box

      Maximum forward speed 10.6 km/h and 9 km/h 15 % more or 1.6 km/h
      Maximum reverse gear 12.7 km/h and 9 km/h 29 % more or 3.7 km/h

      Carrier

      Contact with ground area 30.2 m2 and 1.7 m2 94 % more or 28.5 m2
      Track shoes number per side 40 and 39 2 % more or 1
      Rolling bearings number on either side 7 and 6 14 % more or 1

      3 reasons to buy Caterpillar D4C serie III Hydrostat:

      Standard blade

      Blade angle in both directions 25 degrees and 10 degrees 60 % more or 15 degrees

      Motor

      Power measured at 2400 rev / min and 2000 rev / min 17 % more or 400 rev

      Carrier

      Specific ground pressure 43.1 kPa and 61.6 kPa 30 % less or 18.5 kPa

      Neutral reasons:

      Standard blade

      Width 3420 mm and 2740 mm
      Height 1425 mm and 928 mm

      Sizes

      Height to cab upper part 3235 mm and 2728 mm
      Caterpillar track length on ground level 2700 mm and 2055 mm
      Length without blade 4210 mm and 2957 mm
      Length with blade 5487 mm and 3994 mm
      Width between caterpillar tracks 2460 mm and 1905 mm

      Operation

      Working weight 20050 kg and 7325.5 kg
      Operating voltage 24 V and 12 V

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and natural aspiration
      Manufacturer Cummins and Caterpillar
      Model 6CTA8.3 and 3046
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump variable displacement piston pump and gear type pump
      Overflow valve pressure 19000 kPa and 17236.9 kPa

      Gear box

      Transmission type Powershift, camshaft, full mesh and Hydro-Static Transmission
      Forward gears number 3 and 3
      Reverse gears number 3 and 3

      Carrier

      Standard shoe size 560 mm and 406 mm
      Track width 1900 mm and 1499 mm

      Images

      Sizes

      1. Length with blade 5487 mm 1. Length with blade 3994 mm
      2. Width between caterpillar tracks 2460 mm 2. Width between caterpillar tracks 1905 mm
      3. Height to cab upper part 3235 mm 3. Height to cab upper part 2728 mm
      4. Caterpillar track length on ground level 2700 mm 4. Caterpillar track length on ground level 2055 mm
      5. Clearance 390 mm 5. Clearance 374 mm
      6. Length without blade 4210 mm 6. Length without blade 2957 mm

      Carrier

      7. Track width 1900 mm 7. Track width 1499 mm
      8. Standard shoe size 560 mm 8. Standard shoe size 406 mm