vs.

      New Holland D350 vs. John Deere 400G

      14 reasons to buy New Holland D350:

      Standard blade

      Cut depth 600 mm and 522 mm 13 % more or 78 mm

      Operation

      Fuel Capacity 670 l. and 117.3 l. 82 % more or 552.7 l.
      Cooling system fluid volume 37 l. and 12.3 l. 67 % more or 24.7 l.
      Hydraulic system fluid volume 145 l. and 32.2 l. 78 % more or 112.8 l.
      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes

      Motor

      Effective power 223.7 kW and 44.7 kW 80 % more or 179.0 kW
      Displacement 10.8 l. and 3.9 l. 64 % more or 6.9 l.
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 350 l/min and 46.5 l/min 87 % more or 303.5 l/min

      Gear box

      Maximum forward speed 10.6 km/h and 10 km/h 6 % more or 0.6 km/h
      Maximum reverse gear 12.7 km/h and 9.5 km/h 25 % more or 3.2 km/h

      Carrier

      Rolling bearings number on either side 7 and 5 29 % more or 2
      Contact with ground area 39.6 m2 and 1.3 m2 97 % more or 38.3 m2
      Track shoes number per side 44 and 36 18 % more or 8

      5 reasons to buy John Deere 400G:

      Standard blade

      Blade angle in both directions 50 degrees and 13 degrees 74 % more or 37 degrees

      Operation

      Final drive fluid volume 53 l. and 36 l. 32 % more or 17 l.

      Gear box

      Reverse gears number 4 and 3 25 % more or 1
      Forward gears number 4 and 3 25 % more or 1

      Carrier

      Specific ground pressure 42 kPa and 88.9 kPa 53 % less or 46.9 kPa

      Neutral reasons:

      Standard blade

      Width 3975 mm and 2286 mm
      Height 1700 mm and 727 mm

      Sizes

      Length without blade 5285 mm and 3632 mm
      Caterpillar track length on ground level 3243 mm and 1979 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 39100 kg and 5362 kg

      Motor

      Power measured at 2100 rev / min and 2100 rev / min
      Manufacturer Cummins and John Deere
      Model QSM11 and 4039D

      Hydraulic system

      Type of pump variable displacement piston pump and gear type pump
      Overflow valve pressure 20000 kPa and 18961 kPa

      Gear box

      Transmission type Powershift, camshaft, full mesh and Higher-Low-Reverse gear with direct drive

      Carrier

      Standard shoe size 610 mm and 356 mm

      Images

      Sizes

      4. Caterpillar track length on ground level 3243 mm 4. Caterpillar track length on ground level 1979 mm
      6. Length without blade 5285 mm 6. Length without blade 3632 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 356 mm