vs.

      New Holland D75 LT vs. John Deere 850C WXLT

      4 reasons to buy New Holland D75 LT:

      Operation

      Final drive fluid volume 14.2 l. and 12.3 l. 13 % more or 1.9 l.
      Generator current strength 65 amperes and 45 amperes 31 % more or 20 amperes

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      17 reasons to buy John Deere 850C WXLT:

      Standard blade

      Cut depth 893 mm and 457 mm 49 % more or 436 mm
      Volume 4.2 m3 and 1.5 m3 64 % more or 2.7 m3

      Sizes

      Clearance 406 mm and 383 mm 6 % more or 23 mm

      Operation

      Hydraulic system fluid volume 79.5 l. and 75.7 l. 5 % more or 3.8 l.
      Fuel Capacity 348 l. and 189.3 l. 46 % more or 158.7 l.
      Cooling system fluid volume 34 l. and 18.9 l. 44 % more or 15.1 l.
      Engine oil volume 32.2 l. and 13.6 l. 58 % more or 18.6 l.

      Motor

      Effective power 138 kW and 55.9 kW 59 % more or 82.1 kW
      Maximum torque 814.8 Nm and 360 Nm 56 % more or 454.8 Nm
      Displacement 8.1 l. and 4.5 l. 44 % more or 3.6 l.
      Full power 143.2 kW and 59.7 kW 58 % more or 83.5 kW
      Cylinders number 6 and 4 33 % more or 2

      Hydraulic system

      Pump bandwidth 166 l/min and 76.8 l/min 54 % more or 89.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.7 km/h 12 % more or 1.3 km/h

      Carrier

      Specific ground pressure 42 kPa and 44.6 kPa 6 % less or 2.6 kPa
      Track shoes number per side 43 and 38 12 % more or 5
      Rolling bearings number on either side 7 and 6 14 % more or 1

      Neutral reasons:

      Standard blade

      Width 2490 mm and 4013 mm
      Height 910 mm and 1227 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Width between caterpillar tracks 2310 mm and 4013 mm
      Height to cab upper part 2773 mm and 3151 mm
      Caterpillar track length on ground level 2240 mm and 3073 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 8256 kg and 20126 kg

      Motor

      Manufacturer New Holland and John Deere
      Model 445T/M2 and 6081A
      Aspiration natural aspiration and Turbocharging with atmospheric pressure compensation, with the charge air cooling

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Gear box

      Transmission type Hydro-Static Transmission and Automatic, hydrostatic drive with a split power flow

      Carrier

      Standard shoe size 410 mm and 762 mm
      Caterpillar track pitch 171 mm and 203 mm

      Images

      Sizes

      2. Width between caterpillar tracks 2310 mm 2. Width between caterpillar tracks 4013 mm
      3. Height to cab upper part 2773 mm 3. Height to cab upper part 3151 mm
      4. Caterpillar track length on ground level 2240 mm 4. Caterpillar track length on ground level 3073 mm
      5. Clearance 383 mm 5. Clearance 406 mm

      Carrier

      8. Standard shoe size 410 mm 8. Standard shoe size 762 mm