vs.

      New Holland D75 WT vs. Case 550H LGP

      13 reasons to buy New Holland D75 WT:

      Standard blade

      Volume 1.8 m3 and 1.5 m3 17 % more or 0.3 m3

      Sizes

      Clearance 383 mm and 353 mm 8 % more or 30 mm

      Operation

      Fuel Capacity 189.3 l. and 115.5 l. 39 % more or 73.8 l.
      Cooling system fluid volume 18.9 l. and 15.6 l. 17 % more or 3.3 l.
      Engine oil volume 13.6 l. and 10.4 l. 24 % more or 3.2 l.
      Hydraulic system fluid volume 75.7 l. and 39 l. 48 % more or 36.7 l.
      Final drive fluid volume 14.2 l. and 5.7 l. 60 % more or 8.5 l.

      Motor

      Maximum torque 360 Nm and 298.3 Nm 17 % more or 61.7 Nm
      Displacement 4.5 l. and 3.9 l. 13 % more or 0.6 l.
      Effective power 55.9 kW and 52.2 kW 7 % more or 3.7 kW

      Gear box

      Maximum forward speed 9.7 km/h and 9.3 km/h 4 % more or 0.4 km/h
      Forward gears number 10 and 4 60 % more or 6

      Carrier

      Track shoes number per side 38 and 37 3 % more or 1

      5 reasons to buy Case 550H LGP:

      Standard blade

      Cut depth 495 mm and 457 mm 8 % more or 38 mm

      Motor

      Torque measured at 1500 rev / min and 1400 rev / min 7 % more or 100 rev
      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Hydraulic system

      Pump bandwidth 82.9 l/min and 76.8 l/min 7 % more or 6.1 l/min

      Carrier

      Specific ground pressure 25.5 kPa and 37 kPa 31 % less or 11.5 kPa

      Neutral reasons:

      Standard blade

      Width 2790 mm and 2790 mm
      Height 910 mm and 838 mm
      Blade angle in both directions 25 degrees and 25 degrees

      Sizes

      Width between caterpillar tracks 2590 mm and 2290 mm
      Length with blade 4126 mm and 3970 mm
      Height to cab upper part 2773 mm and 2610 mm
      Caterpillar track length on ground level 2240 mm and 1980 mm

      Operation

      Working weight 8573 kg and 6786 kg
      Operating voltage 12 V and 12 V
      Generator current strength 65 amperes and 65 amperes

      Motor

      Aspiration natural aspiration and turbocharging
      Cylinders number 4 and 4
      Manufacturer New Holland and Case
      Model 445T/M2 and 4T-390
      Full power 59.7 kW and 59.7 kW

      Gear box

      Transmission type Hydro-Static Transmission and Gearbox with constant mesh gears

      Carrier

      Standard shoe size 510 mm and 660 mm
      Rolling bearings number on either side 6 and 6
      Support rollers number on either side 1 and 1
      Caterpillar track pitch 171 mm and 160 mm
      Track width 1700 mm and 1630 mm

      Images

      Sizes

      4. Caterpillar track length on ground level 2240 mm 4. Caterpillar track length on ground level 1980 mm
      5. Clearance 383 mm 5. Clearance 353 mm
      1. Length with blade 4126 mm 1. Length with blade 3970 mm
      2. Width between caterpillar tracks 2590 mm 2. Width between caterpillar tracks 2290 mm
      3. Height to cab upper part 2773 mm 3. Height to cab upper part 2610 mm

      Carrier

      7. Track width 1700 mm 7. Track width 1630 mm
      8. Standard shoe size 510 mm 8. Standard shoe size 660 mm