vs.

      New Holland D75 WT vs. Dressta TD7M LT

      13 reasons to buy New Holland D75 WT:

      Standard blade

      Volume 1.8 m3 and 1.4 m3 22 % more or 0.4 m3
      Cut depth 457 mm and 279 mm 39 % more or 178 mm

      Sizes

      Clearance 383 mm and 323 mm 16 % more or 60 mm

      Operation

      Fuel Capacity 189.3 l. and 170 l. 10 % more or 19.3 l.
      Hydraulic system fluid volume 75.7 l. and 70 l. 8 % more or 5.7 l.
      Final drive fluid volume 14.2 l. and 9.5 l. 33 % more or 4.7 l.

      Motor

      Effective power 55.9 kW and 55 kW 2 % more or 0.9 kW
      Torque measured at 1400 rev / min and 1300 rev / min 7 % more or 100 rev

      Hydraulic system

      Pump bandwidth 76.8 l/min and 75.2 l/min 2 % more or 1.6 l/min

      Gear box

      Forward gears number 10 and 3 70 % more or 7
      Maximum forward speed 9.7 km/h and 9.2 km/h 5 % more or 0.5 km/h

      Carrier

      Specific ground pressure 37 kPa and 47 kPa 21 % less or 10 kPa
      Track shoes number per side 38 and 37 3 % more or 1

      3 reasons to buy Dressta TD7M LT:

      Operation

      Cooling system fluid volume 24.9 l. and 18.9 l. 24 % more or 6.0 l.

      Motor

      Power measured at 2500 rev / min and 2000 rev / min 20 % more or 500 rev
      Full power 60 kW and 59.7 kW 0 % more or 0.3 kW

      Neutral reasons:

      Standard blade

      Height 910 mm and 840 mm
      Blade angle in both directions 25 degrees and 25 degrees
      Width 2790 mm and 2620 mm

      Sizes

      Length with blade 4126 mm and 4780 mm
      Height to cab upper part 2773 mm and 2660 mm

      Operation

      Operating voltage 12 V and 12 V
      Working weight 8573 kg and 7697 kg

      Motor

      Manufacturer New Holland and Cummins
      Model 445T/M2 and B4.5
      Displacement 4.5 l. and 4.5 l.
      Aspiration natural aspiration and 4-stroke diesel engine, natural aspiration, direct run, direct injection
      Cylinders number 4 and 4

      Hydraulic system

      Type of pump gear type pump and Pump with double gear

      Gear box

      Transmission type Hydro-Static Transmission and Powershift of modular camshaft, of electrohydraulic action

      Carrier

      Standard shoe size 510 mm and 381 mm
      Rolling bearings number on either side 6 and 6
      Caterpillar track pitch 171 mm and 165 mm

      Images

      Sizes

      1. Length with blade 4126 mm 1. Length with blade 4780 mm
      3. Height to cab upper part 2773 mm 3. Height to cab upper part 2660 mm
      5. Clearance 383 mm 5. Clearance 323 mm

      Carrier

      8. Standard shoe size 510 mm 8. Standard shoe size 381 mm