vs.

      New Holland D75 WT vs. John Deere 750J LT

      3 reasons to buy New Holland D75 WT:

      Standard blade

      Blade angle in both directions 25 degrees and 23.5 degrees 6 % more or 1.5 degrees

      Sizes

      Clearance 383 mm and 356.9 mm 7 % more or 26.1 mm

      Carrier

      Specific ground pressure 37 kPa and 44.4 kPa 17 % less or 7.4 kPa

      18 reasons to buy John Deere 750J LT:

      Standard blade

      Volume 3.2 m3 and 1.8 m3 44 % more or 1.4 m3
      Cut depth 650 mm and 457 mm 30 % more or 193 mm

      Operation

      Generator current strength 80 amperes and 65 amperes 19 % more or 15 amperes
      Fuel Capacity 371 l. and 189.3 l. 49 % more or 181.7 l.
      Cooling system fluid volume 21.5 l. and 18.9 l. 12 % more or 2.6 l.
      Engine oil volume 26.5 l. and 13.6 l. 49 % more or 12.9 l.
      Hydraulic system fluid volume 105.6 l. and 75.7 l. 28 % more or 29.9 l.
      Final drive fluid volume 15.1 l. and 14.2 l. 6 % more or 0.9 l.

      Motor

      Full power 117.1 kW and 59.7 kW 49 % more or 57.4 kW
      Cylinders number 6 and 4 33 % more or 2
      Effective power 108 kW and 55.9 kW 48 % more or 52.1 kW
      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Maximum torque 677.9 Nm and 360 Nm 47 % more or 317.9 Nm
      Displacement 6.8 l. and 4.5 l. 34 % more or 2.3 l.

      Hydraulic system

      Pump bandwidth 144 l/min and 76.8 l/min 47 % more or 67.2 l/min

      Gear box

      Maximum forward speed 10.1 km/h and 9.7 km/h 4 % more or 0.4 km/h

      Carrier

      Track shoes number per side 45 and 38 16 % more or 7
      Rolling bearings number on either side 8 and 6 25 % more or 2

      Neutral reasons:

      Standard blade

      Height 910 mm and 1194 mm
      Width 2790 mm and 3296 mm

      Sizes

      Caterpillar track length on ground level 2240 mm and 3075 mm
      Length with blade 4126 mm and 5300 mm
      Width between caterpillar tracks 2590 mm and 2438 mm
      Height to cab upper part 2773 mm and 3095 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 8573 kg and 15599 kg

      Motor

      Torque measured at 1400 rev / min and 1400 rev / min
      Model 445T/M2 and 6068H
      Aspiration natural aspiration and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer New Holland and John Deere

      Hydraulic system

      Type of pump gear type pump and piston pump

      Gear box

      Transmission type Hydro-Static Transmission and Hydro-Static Transmission

      Carrier

      Caterpillar track pitch 171 mm and 190 mm
      Track width 1700 mm and 1880 mm
      Standard shoe size 510 mm and 560 mm

      Images

      Sizes

      3. Height to cab upper part 2773 mm 3. Height to cab upper part 3095 mm
      4. Caterpillar track length on ground level 2240 mm 4. Caterpillar track length on ground level 3075 mm
      5. Clearance 383 mm 5. Clearance 356.9 mm
      1. Length with blade 4126 mm 1. Length with blade 5300 mm
      2. Width between caterpillar tracks 2590 mm 2. Width between caterpillar tracks 2438 mm

      Carrier

      7. Track width 1700 mm 7. Track width 1880 mm
      8. Standard shoe size 510 mm 8. Standard shoe size 560 mm