vs.

      New Holland D85B WT vs. Caterpillar D4C serie III

      12 reasons to buy New Holland D85B WT:

      Standard blade

      Volume 1.8 m3 and 1.7 m3 6 % more or 0.1 m3
      Cut depth 483 mm and 448 mm 7 % more or 35 mm

      Operation

      Generator current strength 65 amperes and 55 amperes 15 % more or 10 amperes
      Fuel Capacity 189 l. and 157 l. 17 % more or 32 l.
      Cooling system fluid volume 22.5 l. and 21 l. 7 % more or 1.5 l.
      Hydraulic system fluid volume 75.7 l. and 56.8 l. 25 % more or 18.9 l.

      Motor

      Full power 67.1 kW and 65.6 kW 2 % more or 1.5 kW
      Effective power 63.4 kW and 60.4 kW 5 % more or 3.0 kW

      Hydraulic system

      Pump bandwidth 76.8 l/min and 66.6 l/min 13 % more or 10.2 l/min

      Gear box

      Forward gears number 10 and 3 70 % more or 7
      Reverse gears number 10 and 3 70 % more or 7

      Carrier

      Specific ground pressure 31.8 kPa and 42.7 kPa 26 % less or 10.9 kPa

      9 reasons to buy Caterpillar D4C serie III:

      Sizes

      Clearance 374 mm and 366 mm 2 % more or 8 mm

      Operation

      Engine oil volume 13 l. and 12.3 l. 5 % more or 0.7 l.
      Final drive fluid volume 14.7 l. and 14.2 l. 3 % more or 0.5 l.

      Motor

      Power measured at 2400 rev / min and 2000 rev / min 17 % more or 400 rev
      Displacement 5 l. and 4.5 l. 10 % more or 0.5 l.
      Cylinders number 6 and 4 33 % more or 2

      Gear box

      Maximum forward speed 11.1 km/h and 8.9 km/h 20 % more or 2.2 km/h
      Maximum reverse gear 11.9 km/h and 8.9 km/h 25 % more or 3.0 km/h

      Carrier

      Rolling bearings number on either side 6 and 1 83 % more or 5

      Neutral reasons:

      Standard blade

      Height 910 mm and 928 mm
      Blade angle in both directions 25 degrees and 25 degrees
      Width 2790 mm and 2740 mm

      Sizes

      Length without blade 3153 mm and 2957 mm
      Length with blade 4171 mm and 3994 mm
      Width between caterpillar tracks 2585 mm and 1905 mm
      Height to cab upper part 2788 mm and 2728 mm
      Caterpillar track length on ground level 2266 mm and 2055 mm

      Operation

      Working weight 8936 kg and 7266.1 kg
      Operating voltage 12 V and 12 V

      Motor

      Model FPT 445TA/E66 and 3046

      Hydraulic system

      Type of pump gear type pump and gear type pump

      Gear box

      Transmission type Hydro-Static Transmission and powershift

      Carrier

      Standard shoe size 610 mm and 406 mm
      Track shoes number per side 39 and 39
      Track width 1575 mm and 1499 mm

      Images

      Sizes

      1. Length with blade 4171 mm 1. Length with blade 3994 mm
      2. Width between caterpillar tracks 2585 mm 2. Width between caterpillar tracks 1905 mm
      3. Height to cab upper part 2788 mm 3. Height to cab upper part 2728 mm
      4. Caterpillar track length on ground level 2266 mm 4. Caterpillar track length on ground level 2055 mm
      5. Clearance 366 mm 5. Clearance 374 mm
      6. Length without blade 3153 mm 6. Length without blade 2957 mm

      Carrier

      7. Track width 1575 mm 7. Track width 1499 mm
      8. Standard shoe size 610 mm 8. Standard shoe size 406 mm