vs.

      New Holland D95 LGP vs. New Holland D350

      3 reasons to buy New Holland D95 LGP:

      Standard blade

      Blade angle in both directions 25 degrees and 13 degrees 48 % more or 12 degrees

      Gear box

      Forward gears number 10 Total and 3 70 % more or 7 Total

      Carrier

      Specific ground pressure 27.6 kPa and 88.9 kPa 69 % less or 61.3 kPa

      15 reasons to buy New Holland D350:

      Standard blade

      Cut depth 600 mm and 483 mm 19 % more or 117 mm
      Volume 9.1 m3 and 2.1 m3 77 % more or 7.0 m3

      Operation

      Engine oil volume 35 l. and 15.8 l. 55 % more or 19.2 l.
      Hydraulic system fluid volume 145 l. and 75.7 l. 48 % more or 69.3 l.
      Final drive fluid volume 36 l. and 14.2 l. 61 % more or 21.8 l.
      Generator current strength 70 amperes and 65 amperes 7 % more or 5 amperes
      Fuel Capacity 670 l. and 189.3 l. 72 % more or 480.7 l.
      Cooling system fluid volume 37 l. and 18.9 l. 49 % more or 18.1 l.

      Motor

      Power measured at 2100 rev / min and 2000 rev / min 5 % more or 100 rev
      Displacement 10.8 l. and 6.7 l. 38 % more or 4.1 l.
      Effective power 223.7 kW and 71.6 kW 68 % more or 152.1 kW

      Hydraulic system

      Pump bandwidth 350 l/min and 76.8 l/min 78 % more or 273.2 l/min

      Gear box

      Maximum forward speed 10.6 km/h and 9.7 km/h 8 % more or 0.9 km/h

      Carrier

      Track shoes number per side 44 and 40 9 % more or 4
      Support rollers number on either side 2 and 1 50 % more or 1

      Neutral reasons:

      Standard blade

      Width 3300 mm and 3975 mm
      Height 910 mm and 1700 mm

      Sizes

      Length without blade 3263 mm and 5285 mm
      Length with blade 4258 mm and 6326 mm
      Width between caterpillar tracks 3050 mm and 2744 mm
      Caterpillar track length on ground level 2360 mm and 3243 mm

      Operation

      Operating voltage 12 V and 24 V
      Working weight 9390 kg and 39100 kg

      Motor

      Cylinders number 6 and 6
      Aspiration natural aspiration and Turbocharging with subsequent air cooling (by a cooling radiator)
      Manufacturer New Holland and Cummins
      Model 667T/M2 and QSM11

      Hydraulic system

      Type of pump gear type pump and variable displacement piston pump

      Gear box

      Transmission type Hydro-Static Transmission and Powershift, camshaft, full mesh

      Carrier

      Standard shoe size 710 mm and 610 mm
      Rolling bearings number on either side 7 and 7
      Track width 1780 mm and 2134 mm

      Images

      Sizes

      1. Length with blade 4258 mm 1. Length with blade 6326 mm
      2. Width between caterpillar tracks 3050 mm 2. Width between caterpillar tracks 2744 mm
      4. Caterpillar track length on ground level 2360 mm 4. Caterpillar track length on ground level 3243 mm
      6. Length without blade 3263 mm 6. Length without blade 5285 mm

      Carrier

      7. Track width 1780 mm 7. Track width 2134 mm
      8. Standard shoe size 710 mm 8. Standard shoe size 610 mm