vs.

      New Holland D95 WT vs. Liebherr LR632B L

      4 reasons to buy New Holland D95 WT:

      Standard blade

      Blade angle in both directions 25 degrees and 10 degrees 60 % more or 15 degrees

      Motor

      Power measured at 2000 rev / min and 1800 rev / min 10 % more or 200 rev

      Gear box

      Forward gears number 10 Total and 3 70 % more or 7 Total

      Carrier

      Specific ground pressure 31.3 kPa and 69.6 kPa 55 % less or 38.3 kPa

      13 reasons to buy Liebherr LR632B L:

      Standard blade

      Volume 5.6 m3 and 1.9 m3 66 % more or 3.7 m3
      Cut depth 536 mm and 483 mm 10 % more or 53 mm

      Sizes

      Clearance 494 mm and 379 mm 23 % more or 115 mm

      Operation

      Fuel Capacity 400 l. and 189.3 l. 53 % more or 210.7 l.
      Cooling system fluid volume 62 l. and 18.9 l. 70 % more or 43.1 l.
      Engine oil volume 43 l. and 15.8 l. 63 % more or 27.2 l.
      Hydraulic system fluid volume 162 l. and 75.7 l. 53 % more or 86.3 l.
      Final drive fluid volume 16 l. and 14.2 l. 11 % more or 1.8 l.
      Generator current strength 80 amperes and 65 amperes 19 % more or 15 amperes

      Motor

      Displacement 10.5 l. and 6.7 l. 36 % more or 3.8 l.
      Full power 150 kW and 73.8 kW 51 % more or 76.2 kW

      Hydraulic system

      Pump bandwidth 209 l/min and 76.8 l/min 63 % more or 132.2 l/min

      Gear box

      Maximum forward speed 11 km/h and 9.7 km/h 12 % more or 1.3 km/h

      Neutral reasons:

      Standard blade

      Width 3050 mm and 3372 mm
      Height 910 mm and 1400 mm

      Sizes

      Length without blade 3263 mm and 4335 mm
      Width between caterpillar tracks 2820 mm and 2381 mm
      Height to cab upper part 2773 mm and 3258 mm
      Caterpillar track length on ground level 2360 mm and 2830 mm

      Operation

      Working weight 9163 kg and 20398 kg
      Operating voltage 12 V and 24 V

      Motor

      Manufacturer New Holland and Liebherr
      Model 667T/M2 and D 936 L A6
      Aspiration natural aspiration and turbocharging
      Cylinders number 6 and 6

      Hydraulic system

      Type of pump gear type pump and variable displacement piston pump of axial cam type

      Gear box

      Transmission type Hydro-Static Transmission and Hydrostatic travel drive with infinitely variable control, independent drive for each caterpillar body

      Carrier

      Standard shoe size 610 mm and 508 mm
      Rolling bearings number on either side 7 and 7

      Images

      Sizes

      3. Height to cab upper part 2773 mm 3. Height to cab upper part 3258 mm
      4. Caterpillar track length on ground level 2360 mm 4. Caterpillar track length on ground level 2830 mm
      5. Clearance 379 mm 5. Clearance 494 mm
      6. Length without blade 3263 mm 6. Length without blade 4335 mm
      2. Width between caterpillar tracks 2820 mm 2. Width between caterpillar tracks 2381 mm

      Carrier

      8. Standard shoe size 610 mm 8. Standard shoe size 508 mm