vs.

      Case CX160 vs. Hitachi ZX450HLC

      9 reasons to buy Case CX160:

      Swing device

      Rotation speed 11.4 rev / min and 9 rev / min 21 % more or 2.4 rev

      Operation

      Hydraulic system overflow valve pressure 238400 kPa and 34335.9 kPa 86 % more or 204064.1 kPa
      Hydraulic pump flow rate 138 l/min and 360 l/min 62 % less or 222 l/min

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev

      Carrier

      Specific ground pressure 41.4 kPa and 78 kPa 47 % less or 36.6 kPa
      Maximum travel speed 6 km/h and 5.5 km/h 8 % more or 0.5 km/h

      Booms/sections features 2

      Maximum vertical wall digging depth 5200 mm and 4950 mm 5 % more or 250 mm

      Booms/sections features 1

      Maximum excavation depth 6450 mm and 5800 mm 10 % more or 650 mm
      Maximum vertical wall digging depth 5690 mm and 4260 mm 25 % more or 1430 mm

      21 reasons to buy Hitachi ZX450HLC:

      Sizes

      Counterweight ground clearance 1350 mm and 1020 mm 24 % more or 330 mm
      Width to outside of caterpillar track 3490 mm and 2600 mm 26 % more or 890 mm
      Clearance 738 mm and 432 mm 41 % more or 306 mm

      Operation

      Engine oil volume 55 l. and 9.5 l. 83 % more or 45.5 l.
      Boom reach drive mechanism fluid volume 6.5 l. and 5 l. 23 % more or 1.5 l.
      Fuel Capacity 650 l. and 249.8 l. 62 % more or 400.2 l.
      Cooling system fluid volume 61 l. and 17.7 l. 71 % more or 43.3 l.
      Hydraulic system fluid volume 510 l. and 148 l. 71 % more or 362 l.

      Motor

      Effective power 234.1 kW and 79 kW 66 % more or 155.1 kW
      Displacement 15.7 l. and 3.9 l. 75 % more or 11.8 l.
      Torque measured at 1500 rev / min and 1450 rev / min 3 % more or 50 rev
      Maximum torque 1275 Nm and 440.6 Nm 65 % more or 834.4 Nm
      Cylinders number 6 and 4 33 % more or 2

      Carrier

      Track shoes number per side 53 and 42 21 % more or 11
      Support rollers number on either side 3 and 2 33 % more or 1
      Rolling bearings number on either side 9 and 7 22 % more or 2

      Booms/sections features 2

      Maximum radius along ground level 10600 mm and 8970 mm 15 % more or 1630 mm
      Maximum loading height 7340 mm and 6680 mm 9 % more or 660 mm
      Maximum excavation depth 6230 mm and 6110 mm 2 % more or 120 mm

      Booms/sections features 1

      Maximum radius along ground level 10210 mm and 9320 mm 9 % more or 890 mm
      Maximum loading height 7310 mm and 6960 mm 5 % more or 350 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 2400 mm and 3500 mm
      Caterpillar track length on ground level 3090 mm and 4470 mm
      Height to cab upper part 2950 mm and 3370 mm

      Operation

      Operating voltage 24 V and 12 V
      Working weight 16431.8 kg and 45800 kg

      Motor

      Manufacturer Case and Isuzu
      Model 4TA-390 and AA-6WG1TQA
      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging

      Carrier

      Shoe dimensions 600 mm and 600 mm

      Booms/sections features 2

      Maximum cut height 9300 mm and 10890 mm
      Unit load-transfer height 2950 mm and 3370 mm
      Unit load-transfer length 8410 mm and 11820 mm

      Booms/sections features 1

      Unit load-transfer height 3090 mm and 3370 mm
      Unit load-transfer length 8430 mm and 11820 mm
      Maximum cut height 9600 mm and 10650 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2600 mm 2. Width to outside of caterpillar track 3490 mm
      4. Caterpillar track length on ground level 3090 mm 4. Caterpillar track length on ground level 4470 mm
      5. Clearance 432 mm 5. Clearance 738 mm
      7. Height to cab upper part 2950 mm 7. Height to cab upper part 3370 mm
      8. Rear platform swing radius 2400 mm 8. Rear platform swing radius 3500 mm
      15. Counterweight ground clearance 1020 mm 15. Counterweight ground clearance 1350 mm

      Carrier

      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      1. Unit load-transfer length 8410 mm 1. Unit load-transfer length 11820 mm
      13. Maximum excavation depth 6110 mm 13. Maximum excavation depth 5800 mm
      10. Maximum loading height 6680 mm 10. Maximum loading height 7310 mm
      3. Unit load-transfer height 2950 mm 3. Unit load-transfer height 3370 mm
      11. Maximum radius along ground level 8970 mm 11. Maximum radius along ground level 10210 mm
      9. Maximum cut height 9300 mm 9. Maximum cut height 10890 mm
      12. Maximum vertical wall digging depth 5200 mm 12. Maximum vertical wall digging depth 4260 mm