vs.

      Case CX160 vs. Terex TXC480LC-2

      10 reasons to buy Case CX160:

      Swing device

      Rotation speed 11.4 rev / min and 8.8 rev / min 23 % more or 2.6 rev

      Operation

      Boom reach drive mechanism fluid volume 5 l. and 4 l. 20 % more or 1 l.
      Hydraulic system overflow valve pressure 238400 kPa and 31371.1 kPa 87 % more or 207028.9 kPa
      Hydraulic pump flow rate 138 l/min and 710 l/min 81 % less or 572 l/min

      Motor

      Power measured at 2200 rev / min and 1800 rev / min 18 % more or 400 rev
      Torque measured at 1450 rev / min and 1300 rev / min 10 % more or 150 rev

      Carrier

      Specific ground pressure 41.4 kPa and 79.3 kPa 48 % less or 37.9 kPa
      Maximum travel speed 6 km/h and 5 km/h 17 % more or 1 km/h

      Booms/sections features 2

      Maximum vertical wall digging depth 5200 mm and 4410 mm 15 % more or 790 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 5690 mm and 4080 mm 28 % more or 1610 mm

      21 reasons to buy Terex TXC480LC-2:

      Sizes

      Counterweight ground clearance 1460 mm and 1020 mm 30 % more or 440 mm
      Width to outside of caterpillar track 3900 mm and 2600 mm 33 % more or 1300 mm
      Clearance 770 mm and 432 mm 44 % more or 338 mm

      Operation

      Engine oil volume 44 l. and 9.5 l. 78 % more or 34.5 l.
      Fuel Capacity 620 l. and 249.8 l. 60 % more or 370.2 l.
      Cooling system fluid volume 40 l. and 17.7 l. 56 % more or 22.3 l.
      Generator current strength 300 amperes and 45 amperes 85 % more or 255 amperes
      Hydraulic system fluid volume 265 l. and 148 l. 44 % more or 117 l.

      Motor

      Effective power 244.6 kW and 79 kW 68 % more or 165.6 kW
      Displacement 11 l. and 3.9 l. 65 % more or 7.1 l.
      Maximum torque 1541.6 Nm and 440.6 Nm 71 % more or 1101.0 Nm
      Cylinders number 6 and 4 33 % more or 2

      Carrier

      Track shoes number per side 53 and 42 21 % more or 11
      Support rollers number on either side 3 and 2 33 % more or 1
      Rolling bearings number on either side 9 and 7 22 % more or 2

      Booms/sections features 2

      Maximum radius along ground level 11870 mm and 8970 mm 24 % more or 2900 mm
      Maximum excavation depth 7810 mm and 6110 mm 22 % more or 1700 mm
      Maximum loading height 7880 mm and 6680 mm 15 % more or 1200 mm

      Booms/sections features 1

      Maximum excavation depth 7360 mm and 6450 mm 12 % more or 910 mm
      Maximum radius along ground level 11460 mm and 9320 mm 19 % more or 2140 mm
      Maximum loading height 7730 mm and 6960 mm 10 % more or 770 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 2400 mm and 3700 mm
      Caterpillar track length on ground level 3090 mm and 4470 mm
      Height to cab upper part 2950 mm and 3350 mm

      Operation

      Working weight 16431.8 kg and 47491.1 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration Turbocharging with subsequent air cooling (by a cooling radiator) and turbocharging, with subsequent cooling of charging air by oncoming air flow
      Manufacturer Case and Doosan
      Model 4TA-390 and DV11

      Carrier

      Shoe dimensions 600 mm and 600 mm

      Booms/sections features 2

      Unit load-transfer height 2950 mm and 3730 mm
      Unit load-transfer length 8410 mm and 12130 mm
      Maximum cut height 9300 mm and 11080 mm

      Booms/sections features 1

      Maximum cut height 9600 mm and 10940 mm

      Images

      Sizes

      8. Rear platform swing radius 2400 mm 8. Rear platform swing radius 3700 mm
      15. Counterweight ground clearance 1020 mm 15. Counterweight ground clearance 1460 mm
      2. Width to outside of caterpillar track 2600 mm 2. Width to outside of caterpillar track 3900 mm
      4. Caterpillar track length on ground level 3090 mm 4. Caterpillar track length on ground level 4470 mm
      5. Clearance 432 mm 5. Clearance 770 mm
      7. Height to cab upper part 2950 mm 7. Height to cab upper part 3350 mm

      Carrier

      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      9. Maximum cut height 9300 mm 9. Maximum cut height 11230 mm
      10. Maximum loading height 6680 mm 10. Maximum loading height 8040 mm
      11. Maximum radius along ground level 8970 mm 11. Maximum radius along ground level 12430 mm
      12. Maximum vertical wall digging depth 5200 mm 12. Maximum vertical wall digging depth 4965 mm
      13. Maximum excavation depth 6110 mm 13. Maximum excavation depth 8440 mm
      1. Unit load-transfer length 8410 mm 1. Unit load-transfer length 12130 mm
      3. Unit load-transfer height 2950 mm 3. Unit load-transfer height 3730 mm