- Home/
- Comparison/
- Hydraulic Shovel/
- Case CX210B vs. Volvo EC290BLC
Case CX210B vs. Volvo EC290BLC
10 reasons to buy Case CX210B:
Swing device
Rotation speed | 11.5 rev / min and 10.2 rev / min | 11 % more or 1.3 rev |
Sizes
Width to outside of caterpillar track | 3200 mm and 3190 mm | 0 % more or 10 mm |
Operation
Hydraulic pump flow rate | 211 l/min and 500 l/min | 58 % less or 289 l/min |
Motor
Effective power | 117 kW and 106.6 kW | 9 % more or 10.4 kW |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Carrier
Maximum travel speed | 5.6 km/h and 5.2 km/h | 7 % more or 0.4 km/h |
Rolling bearings number on either side | 8 and 2 | 75 % more or 6 |
Specific ground pressure | 35.9 kPa and 53.9 kPa | 33 % less or 18.0 kPa |
Booms/sections features 1
Maximum loading height | 6810 mm and 6690 mm | 2 % more or 120 mm |
Maximum vertical wall digging depth | 5960 mm and 5440 mm | 9 % more or 520 mm |
21 reasons to buy Volvo EC290BLC:
Sizes
Clearance | 480 mm and 460 mm | 4 % more or 20 mm |
Counterweight ground clearance | 1145 mm and 1040 mm | 9 % more or 105 mm |
Shovel
Maximum bucket volume | 2.1 m3 and 1.2 m3 | 43 % more or 0.9 m3 |
Operation
Fuel Capacity | 470 l. and 410 l. | 13 % more or 60 l. |
Cooling system fluid volume | 44 l. and 25.6 l. | 42 % more or 18.4 l. |
Hydraulic system fluid volume | 400 l. and 240 l. | 40 % more or 160 l. |
Engine oil volume | 32 l. and 23.1 l. | 28 % more or 8.9 l. |
Boom reach drive mechanism fluid volume | 11 l. and 5 l. | 55 % more or 6 l. |
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Motor
Power measured at | 1900 rev / min and 1800 rev / min | 5 % more or 100 rev |
Displacement | 7.1 l. and 5.2 l. | 27 % more or 1.9 l. |
Maximum torque | 940 Nm and 627.7 Nm | 33 % more or 312.3 Nm |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Track shoes number per side | 50 and 49 | 2 % more or 1 |
Support rollers number on either side | 9 and 2 | 78 % more or 7 |
Booms/sections features 2
Maximum loading height | 7050 mm and 6590 mm | 7 % more or 460 mm |
Maximum vertical wall digging depth | 6200 mm and 550 mm | 91 % more or 5650 mm |
Maximum excavation depth | 7320 mm and 6110 mm | 17 % more or 1210 mm |
Maximum radius along ground level | 10490 mm and 9240 mm | 12 % more or 1250 mm |
Booms/sections features 1
Maximum radius along ground level | 9950 mm and 9730 mm | 2 % more or 220 mm |
Maximum excavation depth | 6830 mm and 6650 mm | 3 % more or 180 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2940 mm and 3030 mm |
Rear platform swing radius | 2750 mm and 2970 mm |
Caterpillar track length on ground level | 3660 mm and 4015 mm |
Operation
Working weight | 21500 kg and 28813.1 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | turbocharging and turbocharging |
Manufacturer | Isuzu and Volvo |
Model | 4HK1X, III Level III certified and D7D ECE2 |
Carrier
Shoe dimensions | 800 mm and 600 mm |
Booms/sections features 2
Maximum cut height | 9380 mm and 10040 mm |
Unit load-transfer height | 3190 mm and 3290 mm |
Unit load-transfer length | 9480 mm and 10400 mm |
Booms/sections features 1
Maximum cut height | 9650 mm and 9620 mm |
Unit load-transfer height | 2970 mm and 3430 mm |
Unit load-transfer length | 9400 mm and 10480 mm |
Images
Sizes
5. Clearance | 460 mm | 5. Clearance | 480 mm |
7. Height to cab upper part | 2940 mm | 7. Height to cab upper part | 3030 mm |
8. Rear platform swing radius | 2750 mm | 8. Rear platform swing radius | 2970 mm |
15. Counterweight ground clearance | 1040 mm | 15. Counterweight ground clearance | 1145 mm |
2. Width to outside of caterpillar track | 3200 mm | 2. Width to outside of caterpillar track | 3190 mm |
4. Caterpillar track length on ground level | 3660 mm | 4. Caterpillar track length on ground level | 4015 mm |
Carrier
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
10. Maximum loading height | 6590 mm | 10. Maximum loading height | 8860 mm |
11. Maximum radius along ground level | 9240 mm | 11. Maximum radius along ground level | 10560 mm |
13. Maximum excavation depth | 6110 mm | 13. Maximum excavation depth | 6720 mm |
1. Unit load-transfer length | 9480 mm | 1. Unit load-transfer length | 10400 mm |
3. Unit load-transfer height | 3190 mm | 3. Unit load-transfer height | 3730 mm |
9. Maximum cut height | 9380 mm | 9. Maximum cut height | 12790 mm |
12. Maximum vertical wall digging depth | 550 mm | 12. Maximum vertical wall digging depth | 7110 mm |