- Home/
- Comparison/
- Hydraulic Shovel/
- Case CX230 vs. Fiat-Hitachi EX355BEH
Case CX230 vs. Fiat-Hitachi EX355BEH
5 reasons to buy Case CX230:
Swing device
Rotation speed | 11.9 rev / min and 11.3 rev / min | 5 % more or 0.6 rev |
Operation
Hydraulic pump flow rate | 402 l/min and 520 l/min | 23 % less or 118 l/min |
Generator current strength | 50 amperes and 40 amperes | 20 % more or 10 amperes |
Hydraulic system overflow valve pressure | 34300 kPa and 32000 kPa | 7 % more or 2300 kPa |
Carrier
Specific ground pressure | 53 kPa and 66.9 kPa | 21 % less or 13.9 kPa |
16 reasons to buy Fiat-Hitachi EX355BEH:
Sizes
Clearance | 530 mm and 480 mm | 9 % more or 50 mm |
Counterweight ground clearance | 1250 mm and 1090 mm | 13 % more or 160 mm |
Width to outside of caterpillar track | 3000 mm and 2540 mm | 15 % more or 460 mm |
Shovel
Maximum bucket volume | 2.1 m3 and 1.3 m3 | 38 % more or 0.8 m3 |
Operation
Fuel Capacity | 560 l. and 265 l. | 53 % more or 295 l. |
Hydraulic system fluid volume | 320 l. and 206 l. | 36 % more or 114 l. |
Engine oil volume | 35 l. and 24 l. | 31 % more or 11 l. |
Motor
Effective power | 177 kW and 105.1 kW | 41 % more or 71.9 kW |
Power measured at | 2000 rev / min and 1950 rev / min | 2 % more or 50 rev |
Displacement | 9.8 l. and 6.5 l. | 34 % more or 3.3 l. |
Carrier
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Booms/sections features 1
Maximum loading height | 6400 mm and 6390 mm | 0 % more or 10 mm |
Maximum vertical wall digging depth | 5400 mm and 4840 mm | 10 % more or 560 mm |
Maximum excavation depth | 5640 mm and 5570 mm | 1 % more or 70 mm |
Maximum radius along ground level | 9120 mm and 8780 mm | 4 % more or 340 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2830 mm and 3300 mm |
Caterpillar track length on ground level | 3460 mm and 4052 mm |
Height to cab upper part | 2950 mm and 3020 mm |
Operation
Working weight | 22370 kg and 34000 kg |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Isuzu and Isuzu |
Model | BB-6BGIT and 6SD1T |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and turbocharging |
Carrier
Support rollers number on either side | 2 and 2 |
Shoe dimensions | 550 mm and 600 mm |
Track width | 1990 mm and 2400 mm |
Booms/sections features 1
Maximum cut height | 9190 mm and 9080 mm |
Unit load-transfer height | 3040 mm and 3640 mm |
Unit load-transfer length | 9590 mm and 10680 mm |
Images
Sizes
15. Counterweight ground clearance | 1090 mm | 15. Counterweight ground clearance | 1250 mm |
2. Width to outside of caterpillar track | 2540 mm | 2. Width to outside of caterpillar track | 3000 mm |
4. Caterpillar track length on ground level | 3460 mm | 4. Caterpillar track length on ground level | 4052 mm |
5. Clearance | 480 mm | 5. Clearance | 530 mm |
7. Height to cab upper part | 2950 mm | 7. Height to cab upper part | 3020 mm |
8. Rear platform swing radius | 2830 mm | 8. Rear platform swing radius | 3300 mm |
Carrier
6. Track width | 1990 mm | 6. Track width | 2400 mm |
14. Shoe dimensions | 550 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 9500 mm | 1. Unit load-transfer length | 10680 mm |
3. Unit load-transfer height | 2950 mm | 3. Unit load-transfer height | 3640 mm |
9. Maximum cut height | 9710 mm | 9. Maximum cut height | 9080 mm |
10. Maximum loading height | 6900 mm | 10. Maximum loading height | 6400 mm |
11. Maximum radius along ground level | 9780 mm | 11. Maximum radius along ground level | 9120 mm |
12. Maximum vertical wall digging depth | 6020 mm | 12. Maximum vertical wall digging depth | 5400 mm |
13. Maximum excavation depth | 6650 mm | 13. Maximum excavation depth | 5640 mm |