vs.

      Case CX330 Long-Range vs. Samsung SE280NLC-3

      15 reasons to buy Case CX330 Long-Range:

      Sizes

      Counterweight ground clearance 1210 mm and 1125 mm 7 % more or 85 mm
      Width to outside of caterpillar track 3400 mm and 2990 mm 12 % more or 410 mm

      Operation

      Engine oil volume 36 l. and 25.5 l. 29 % more or 10.5 l.
      Cooling system fluid volume 30 l. and 26.5 l. 12 % more or 3.5 l.
      Hydraulic system fluid volume 350 l. and 332 l. 5 % more or 18 l.
      Fuel Capacity 580 l. and 470 l. 19 % more or 110 l.

      Motor

      Effective power 184.9 kW and 146.9 kW 21 % more or 38.0 kW
      Power measured at 2000 rev / min and 1900 rev / min 5 % more or 100 rev
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Maximum torque 1079.2 Nm and 852.8 Nm 21 % more or 226.4 Nm

      Carrier

      Maximum travel speed 5.5 km/h and 4.4 km/h 20 % more or 1.1 km/h

      Booms/sections features 1

      Maximum excavation depth 16750 mm and 6850 mm 59 % more or 9900 mm
      Maximum radius along ground level 20950 mm and 9950 mm 53 % more or 11000 mm
      Maximum loading height 13050 mm and 6670 mm 49 % more or 6380 mm
      Maximum vertical wall digging depth 14100 mm and 5350 mm 62 % more or 8750 mm

      8 reasons to buy Samsung SE280NLC-3:

      Swing device

      Rotation speed 10.8 rev / min and 9.6 rev / min 11 % more or 1.2 rev

      Operation

      Boom reach drive mechanism fluid volume 11 l. and 6 l. 45 % more or 5 l.
      Hydraulic system overflow valve pressure 34335.9 kPa and 34301.4 kPa 0 % more or 34.5 kPa
      Hydraulic pump flow rate 500 l/min and 568 l/min 12 % less or 68 l/min

      Motor

      Displacement 8.3 l. and 7.8 l. 6 % more or 0.5 l.

      Carrier

      Track shoes number per side 50 and 48 4 % more or 2
      Rolling bearings number on either side 9 and 8 11 % more or 1
      Specific ground pressure 52 kPa and 58 kPa 10 % less or 6 kPa

      Neutral reasons:

      Sizes

      Rear platform swing radius 3570 mm and 3150 mm
      Height to cab upper part 3130 mm and 3030 mm
      Caterpillar track length on ground level 4040 mm and 4015 mm
      Clearance 480 mm and 480 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 50 amperes and 50 amperes
      Working weight 39400 kg and 27800 kg

      Motor

      Manufacturer Isuzu and Cummins
      Model AH-6HKIX, III Level III certified and C8.3-C
      Aspiration turbocharging and turbocharging
      Cylinders number 6 and 6

      Carrier

      Track width 2600 mm and 2390 mm
      Shoe dimensions 800 mm and 600 mm
      Support rollers number on either side 2 and 2

      Booms/sections features 1

      Unit load-transfer height 3500 mm and 3370 mm
      Unit load-transfer length 16770 mm and 10760 mm
      Maximum cut height 15200 mm and 9610 mm

      Images

      Sizes

      15. Counterweight ground clearance 1210 mm 15. Counterweight ground clearance 1125 mm
      2. Width to outside of caterpillar track 3400 mm 2. Width to outside of caterpillar track 2990 mm
      4. Caterpillar track length on ground level 4040 mm 4. Caterpillar track length on ground level 4015 mm
      5. Clearance 480 mm 5. Clearance 480 mm
      7. Height to cab upper part 3130 mm 7. Height to cab upper part 3030 mm
      8. Rear platform swing radius 3570 mm 8. Rear platform swing radius 3150 mm

      Carrier

      6. Track width 2600 mm 6. Track width 2390 mm
      14. Shoe dimensions 800 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      13. Maximum excavation depth 16750 mm 13. Maximum excavation depth 8300 mm
      1. Unit load-transfer length 16770 mm 1. Unit load-transfer length 10760 mm
      3. Unit load-transfer height 3500 mm 3. Unit load-transfer height 3370 mm
      9. Maximum cut height 15200 mm 9. Maximum cut height 9610 mm
      10. Maximum loading height 13050 mm 10. Maximum loading height 6670 mm
      11. Maximum radius along ground level 20950 mm 11. Maximum radius along ground level 9950 mm
      12. Maximum vertical wall digging depth 14100 mm 12. Maximum vertical wall digging depth 5350 mm