- Home/
- Comparison/
- Hydraulic Shovel/
- Case CX330 Long-Range vs. Sumitomo SH220LC-2
Case CX330 Long-Range vs. Sumitomo SH220LC-2
15 reasons to buy Case CX330 Long-Range:
Sizes
Width to outside of caterpillar track | 3400 mm and 3190 mm | 6 % more or 210 mm |
Clearance | 480 mm and 460 mm | 4 % more or 20 mm |
Counterweight ground clearance | 1210 mm and 1100 mm | 9 % more or 110 mm |
Operation
Generator current strength | 50 amperes and 25 amperes | 50 % more or 25 amperes |
Fuel Capacity | 580 l. and 310 l. | 47 % more or 270 l. |
Cooling system fluid volume | 30 l. and 27 l. | 10 % more or 3 l. |
Hydraulic system fluid volume | 350 l. and 200 l. | 43 % more or 150 l. |
Engine oil volume | 36 l. and 25 l. | 31 % more or 11 l. |
Motor
Effective power | 184.9 kW and 114.1 kW | 38 % more or 70.8 kW |
Displacement | 7.8 l. and 6.5 l. | 17 % more or 1.3 l. |
Maximum torque | 1079.2 Nm and 539 Nm | 50 % more or 540.2 Nm |
Booms/sections features 1
Maximum radius along ground level | 20950 mm and 9780 mm | 53 % more or 11170 mm |
Maximum loading height | 13050 mm and 6300 mm | 52 % more or 6750 mm |
Maximum excavation depth | 16750 mm and 6310 mm | 62 % more or 10440 mm |
Maximum vertical wall digging depth | 14100 mm and 5350 mm | 62 % more or 8750 mm |
8 reasons to buy Sumitomo SH220LC-2:
Swing device
Rotation speed | 10.4 rev / min and 9.6 rev / min | 8 % more or 0.8 rev |
Operation
Hydraulic pump flow rate | 424 l/min and 568 l/min | 25 % less or 144 l/min |
Hydraulic system overflow valve pressure | 34323.3 kPa and 34301.4 kPa | 0 % more or 21.9 kPa |
Motor
Power measured at | 2150 rev / min and 2000 rev / min | 7 % more or 150 rev |
Torque measured at | 1700 rev / min and 1500 rev / min | 12 % more or 200 rev |
Carrier
Track shoes number per side | 51 and 48 | 6 % more or 3 |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Specific ground pressure | 50 kPa and 58 kPa | 14 % less or 8 kPa |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 4040 mm and 3840 mm |
Height to cab upper part | 3130 mm and 2920 mm |
Rear platform swing radius | 3570 mm and 2990 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 39400 kg and 23700 kg |
Boom reach drive mechanism fluid volume | 6 l. and 6 l. |
Motor
Manufacturer | Isuzu and Isuzu |
Model | AH-6HKIX, III Level III certified and A-6BG1T |
Cylinders number | 6 and 6 |
Aspiration | turbocharging and turbocharging |
Carrier
Shoe dimensions | 800 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Track width | 2600 mm and 2590 mm |
Booms/sections features 1
Unit load-transfer height | 3500 mm and 3050 mm |
Maximum cut height | 15200 mm and 9310 mm |
Unit load-transfer length | 16770 mm and 9960 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3400 mm | 2. Width to outside of caterpillar track | 3190 mm |
4. Caterpillar track length on ground level | 4040 mm | 4. Caterpillar track length on ground level | 3840 mm |
5. Clearance | 480 mm | 5. Clearance | 460 mm |
7. Height to cab upper part | 3130 mm | 7. Height to cab upper part | 2920 mm |
8. Rear platform swing radius | 3570 mm | 8. Rear platform swing radius | 2990 mm |
15. Counterweight ground clearance | 1210 mm | 15. Counterweight ground clearance | 1100 mm |
Carrier
6. Track width | 2600 mm | 6. Track width | 2590 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 16750 mm | 13. Maximum excavation depth | 6960 mm |
11. Maximum radius along ground level | 20950 mm | 11. Maximum radius along ground level | 10830 mm |
12. Maximum vertical wall digging depth | 14100 mm | 12. Maximum vertical wall digging depth | 6670 mm |
1. Unit load-transfer length | 16770 mm | 1. Unit load-transfer length | 9960 mm |
3. Unit load-transfer height | 3500 mm | 3. Unit load-transfer height | 3050 mm |
9. Maximum cut height | 15200 mm | 9. Maximum cut height | 9940 mm |
10. Maximum loading height | 13050 mm | 10. Maximum loading height | 6890 mm |