- Home/
- Comparison/
- Hydraulic Shovel/
- Caterpillar 325D L vs. Fiat-Hitachi EX355LC
Caterpillar 325D L vs. Fiat-Hitachi EX355LC
8 reasons to buy Caterpillar 325D L:
Sizes
Width to outside of caterpillar track | 3390 mm and 3190 mm | 6 % more or 200 mm |
Operation
Generator current strength | 65 amperes and 40 amperes | 38 % more or 25 amperes |
Hydraulic system overflow valve pressure | 36000 kPa and 32000 kPa | 11 % more or 4000 kPa |
Hydraulic pump flow rate | 470 l/min and 520 l/min | 10 % less or 50 l/min |
Booms/sections features 1
Maximum excavation depth | 7833 mm and 6490 mm | 17 % more or 1343 mm |
Maximum radius along ground level | 11153 mm and 10100 mm | 9 % more or 1053 mm |
Maximum loading height | 7102 mm and 7030 mm | 1 % more or 72 mm |
Maximum vertical wall digging depth | 6590 mm and 6290 mm | 5 % more or 300 mm |
11 reasons to buy Fiat-Hitachi EX355LC:
Swing device
Rotation speed | 11.3 rev / min and 10.2 rev / min | 10 % more or 1.1 rev |
Sizes
Counterweight ground clearance | 1250 mm and 1110 mm | 11 % more or 140 mm |
Clearance | 530 mm and 490 mm | 8 % more or 40 mm |
Operation
Engine oil volume | 35 l. and 30 l. | 14 % more or 5 l. |
Fuel Capacity | 560 l. and 520 l. | 7 % more or 40 l. |
Cooling system fluid volume | 39 l. and 30 l. | 23 % more or 9 l. |
Hydraulic system fluid volume | 320 l. and 310 l. | 3 % more or 10 l. |
Motor
Effective power | 177 kW and 141.7 kW | 20 % more or 35.3 kW |
Power measured at | 2000 rev / min and 1800 rev / min | 10 % more or 200 rev |
Displacement | 9.8 l. and 7.2 l. | 27 % more or 2.6 l. |
Carrier
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Neutral reasons:
Sizes
Rear platform swing radius | 3080 mm and 3300 mm |
Height to cab upper part | 3040 mm and 3020 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 29240 kg and 34250 kg |
Motor
Manufacturer | Caterpillar and Isuzu |
Model | C7 ACERT and 6SD1T |
Carrier
Shoe dimensions | 800 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Rolling bearings number on either side | 9 and 9 |
Track width | 2590 mm and 2590 mm |
Booms/sections features 1
Unit load-transfer height | 3632 mm and 3170 mm |
Unit load-transfer length | 10410 mm and 11040 mm |
Maximum cut height | 10297 mm and 9920 mm |
Images
Sizes
8. Rear platform swing radius | 3080 mm | 8. Rear platform swing radius | 3300 mm |
15. Counterweight ground clearance | 1110 mm | 15. Counterweight ground clearance | 1250 mm |
2. Width to outside of caterpillar track | 3390 mm | 2. Width to outside of caterpillar track | 3190 mm |
5. Clearance | 490 mm | 5. Clearance | 530 mm |
7. Height to cab upper part | 3040 mm | 7. Height to cab upper part | 3020 mm |
Carrier
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
6. Track width | 2590 mm | 6. Track width | 2590 mm |
Booms/sections features 1
13. Maximum excavation depth | 6733 mm | 13. Maximum excavation depth | 6490 mm |
1. Unit load-transfer length | 9800 mm | 1. Unit load-transfer length | 11040 mm |
3. Unit load-transfer height | 3130 mm | 3. Unit load-transfer height | 3170 mm |
9. Maximum cut height | 9686 mm | 9. Maximum cut height | 9920 mm |
10. Maximum loading height | 6480 mm | 10. Maximum loading height | 7030 mm |
11. Maximum radius along ground level | 10023 mm | 11. Maximum radius along ground level | 10100 mm |
12. Maximum vertical wall digging depth | 5811 mm | 12. Maximum vertical wall digging depth | 6290 mm |