- Home/
- Comparison/
- Hydraulic Shovel/
- Doosan DX350LC vs. John Deere 992E
Doosan DX350LC vs. John Deere 992E
6 reasons to buy Doosan DX350LC:
Swing device
Rotation speed | 9.6 rev / min and 9 rev / min | 6 % more or 0.6 rev |
Operation
Hydraulic system overflow valve pressure | 34300 kPa and 29440 kPa | 14 % more or 4860 kPa |
Hydraulic pump flow rate | 578 l/min and 720 l/min | 20 % less or 142 l/min |
Engine oil volume | 36 l. and 34 l. | 6 % more or 2 l. |
Boom reach drive mechanism fluid volume | 6 l. and 5.7 l. | 5 % more or 0.3 l. |
Carrier
Specific ground pressure | 49 kPa and 59.9 kPa | 18 % less or 10.9 kPa |
28 reasons to buy John Deere 992E:
Sizes
Width to outside of caterpillar track | 3640 mm and 3480 mm | 4 % more or 160 mm |
Clearance | 735 mm and 510 mm | 31 % more or 225 mm |
Counterweight ground clearance | 1330 mm and 1195 mm | 10 % more or 135 mm |
Shovel
Bucket initial volume | 1.9 m3 and 1.5 m3 | 21 % more or 0.4 m3 |
Bucket minimum volume | 1.2 m3 and 1.3 m3 | 8 % less or 0.1 m3 |
Maximum bucket volume | 3.2 m3 and 1.8 m3 | 44 % more or 1.4 m3 |
Operation
Fuel Capacity | 590 l. and 550 l. | 7 % more or 40 l. |
Cooling system fluid volume | 38 l. and 34 l. | 11 % more or 4 l. |
Hydraulic system fluid volume | 520 l. and 460 l. | 12 % more or 60 l. |
Motor
Effective power | 213 kW and 202.1 kW | 5 % more or 10.9 kW |
Power measured at | 2000 rev / min and 1900 rev / min | 5 % more or 100 rev |
Displacement | 10.1 l. and 7.6 l. | 25 % more or 2.5 l. |
Maximum torque | 1295 Nm and 1128 Nm | 13 % more or 167 Nm |
Carrier
Maximum travel speed | 5.5 km/h and 5.1 km/h | 7 % more or 0.4 km/h |
Track shoes number per side | 53 and 48 | 9 % more or 5 |
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Booms/sections features 3
Maximum vertical wall digging depth | 8450 mm and 6858 mm | 19 % more or 1592 mm |
Maximum excavation depth | 9110 mm and 8287 mm | 9 % more or 823 mm |
Maximum radius along ground level | 13180 mm and 11748 mm | 11 % more or 1432 mm |
Maximum loading height | 8770 mm and 7661 mm | 13 % more or 1109 mm |
Booms/sections features 2
Maximum excavation depth | 8260 mm and 7533 mm | 9 % more or 727 mm |
Maximum radius along ground level | 12270 mm and 10975 mm | 11 % more or 1295 mm |
Maximum loading height | 7780 mm and 7196 mm | 8 % more or 584 mm |
Maximum vertical wall digging depth | 7040 mm and 5916 mm | 16 % more or 1124 mm |
Booms/sections features 1
Maximum loading height | 7040 mm and 6882 mm | 2 % more or 158 mm |
Maximum excavation depth | 7260 mm and 6931 mm | 5 % more or 329 mm |
Maximum vertical wall digging depth | 5340 mm and 5121 mm | 4 % more or 219 mm |
Maximum radius along ground level | 11160 mm and 10382 mm | 7 % more or 778 mm |
Neutral reasons:
Sizes
Height to cab upper part | 3125 mm and 3210 mm |
Rear platform swing radius | 3500 mm and 3470 mm |
Caterpillar track length on ground level | 4040 mm and 4470 mm |
Operation
Working weight | 35200 kg and 44270 kg |
Operating voltage | 24 V and 24 V |
Motor
Manufacturer | Doosan and John Deere |
Cylinders number | 6 and 6 |
Model | DL08 and 6101A |
Torque measured at | 1300 rev / min and 1300 rev / min |
Aspiration | Turbocharging with intercooler and Turbocharging with subsequent air cooling (by a cooling radiator) |
Carrier
Shoe dimensions | 800 mm and 750 mm |
Rolling bearings number on either side | 9 and 9 |
Booms/sections features 3
Maximum cut height | 10848 mm and 11850 mm |
Unit load-transfer height | 3483 mm and 4660 mm |
Unit load-transfer length | 11300 mm and 11700 mm |
Booms/sections features 2
Unit load-transfer height | 3360 mm and 3480 mm |
Unit load-transfer length | 11280 mm and 11790 mm |
Maximum cut height | 10345 mm and 11180 mm |
Booms/sections features 1
Maximum cut height | 9994 mm and 10270 mm |
Unit load-transfer height | 3592 mm and 3600 mm |
Unit load-transfer length | 11380 mm and 11880 mm |
Images
Sizes
8. Rear platform swing radius | 3500 mm | 8. Rear platform swing radius | 3470 mm |
15. Counterweight ground clearance | 1195 mm | 15. Counterweight ground clearance | 1330 mm |
2. Width to outside of caterpillar track | 3480 mm | 2. Width to outside of caterpillar track | 3640 mm |
4. Caterpillar track length on ground level | 4040 mm | 4. Caterpillar track length on ground level | 4470 mm |
5. Clearance | 510 mm | 5. Clearance | 735 mm |
7. Height to cab upper part | 3125 mm | 7. Height to cab upper part | 3210 mm |
Carrier
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 750 mm |
Booms/sections features 1
1. Unit load-transfer length | 11300 mm | 1. Unit load-transfer length | 11880 mm |
10. Maximum loading height | 7661 mm | 10. Maximum loading height | 8770 mm |
3. Unit load-transfer height | 3483 mm | 3. Unit load-transfer height | 3600 mm |
11. Maximum radius along ground level | 11748 mm | 11. Maximum radius along ground level | 13180 mm |
9. Maximum cut height | 10848 mm | 9. Maximum cut height | 10270 mm |
12. Maximum vertical wall digging depth | 6858 mm | 12. Maximum vertical wall digging depth | 8450 mm |
13. Maximum excavation depth | 8287 mm | 13. Maximum excavation depth | 9110 mm |