- Home/
- Comparison/
- Hydraulic Shovel/
- Fiat-Hitachi EX355EL vs. Komatsu PC380LC-7
Fiat-Hitachi EX355EL vs. Komatsu PC380LC-7
15 reasons to buy Fiat-Hitachi EX355EL:
Swing device
Rotation speed | 11.3 rev / min and 9.5 rev / min | 16 % more or 1.8 rev |
Sizes
Width to outside of caterpillar track | 3000 mm and 2972 mm | 1 % more or 28 mm |
Operation
Cooling system fluid volume | 39 l. and 32 l. | 18 % more or 7 l. |
Hydraulic system fluid volume | 320 l. and 188 l. | 41 % more or 132 l. |
Engine oil volume | 35 l. and 32 l. | 9 % more or 3 l. |
Hydraulic pump flow rate | 520 l/min and 536 l/min | 3 % less or 16 l/min |
Motor
Power measured at | 2000 rev / min and 1900 rev / min | 5 % more or 100 rev |
Displacement | 9.8 l. and 8.3 l. | 15 % more or 1.5 l. |
Carrier
Maximum travel speed | 5.5 km/h and 4.3 km/h | 22 % more or 1.2 km/h |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Specific ground pressure | 9.7 lb / sq. inch and 10 lb / sq. inch | 3 % less or 0.3 lb |
Booms/sections features 1
Maximum vertical wall digging depth | 6290 mm and 4985 mm | 21 % more or 1305 mm |
Maximum excavation depth | 6490 mm and 6220 mm | 4 % more or 270 mm |
Maximum radius along ground level | 10100 mm and 9950 mm | 1 % more or 150 mm |
Maximum loading height | 7030 mm and 6730 mm | 4 % more or 300 mm |
5 reasons to buy Komatsu PC380LC-7:
Sizes
Clearance | 706 mm and 530 mm | 25 % more or 176 mm |
Counterweight ground clearance | 1320 mm and 1250 mm | 5 % more or 70 mm |
Operation
Fuel Capacity | 605 l. and 560 l. | 7 % more or 45 l. |
Generator current strength | 60 amperes and 40 amperes | 33 % more or 20 amperes |
Motor
Effective power | 180.5 kW and 177 kW | 2 % more or 3.5 kW |
Neutral reasons:
Sizes
Rear platform swing radius | 3300 mm and 3450 mm |
Height to cab upper part | 3020 mm and 3265 mm |
Caterpillar track length on ground level | 4052 mm and 4350 mm |
Operation
Working weight | 34000 kg and 39800 kg |
Operating voltage | 24 V and 24 V |
Motor
Cylinders number | 6 and 6 |
Aspiration | turbocharging and Turbocharging with subsequent air cooling (by a cooling radiator) |
Manufacturer | Isuzu and Komatsu |
Model | 6SD1T and SAA6D114E-2 |
Carrier
Track width | 2400 mm and 2372 mm |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Booms/sections features 1
Unit load-transfer height | 3490 mm and 3400 mm |
Unit load-transfer length | 11040 mm and 11290 mm |
Maximum cut height | 9920 mm and 9715 mm |
Images
Sizes
7. Height to cab upper part | 3020 mm | 7. Height to cab upper part | 3265 mm |
8. Rear platform swing radius | 3300 mm | 8. Rear platform swing radius | 3450 mm |
15. Counterweight ground clearance | 1250 mm | 15. Counterweight ground clearance | 1320 mm |
2. Width to outside of caterpillar track | 3000 mm | 2. Width to outside of caterpillar track | 2972 mm |
4. Caterpillar track length on ground level | 4052 mm | 4. Caterpillar track length on ground level | 4350 mm |
5. Clearance | 530 mm | 5. Clearance | 706 mm |
Carrier
6. Track width | 2400 mm | 6. Track width | 2372 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
1. Unit load-transfer length | 11040 mm | 1. Unit load-transfer length | 11140 mm |
3. Unit load-transfer height | 3490 mm | 3. Unit load-transfer height | 3280 mm |
9. Maximum cut height | 9920 mm | 9. Maximum cut height | 10345 mm |
10. Maximum loading height | 7030 mm | 10. Maximum loading height | 7245 mm |
11. Maximum radius along ground level | 10100 mm | 11. Maximum radius along ground level | 10920 mm |
12. Maximum vertical wall digging depth | 6290 mm | 12. Maximum vertical wall digging depth | 6345 mm |
13. Maximum excavation depth | 6490 mm | 13. Maximum excavation depth | 7245 mm |