vs.

      Hitachi ZX200LC-3 vs. John Deere 110

      23 reasons to buy Hitachi ZX200LC-3:

      Sizes

      Clearance 450 mm and 440 mm 2 % more or 10 mm
      Counterweight ground clearance 1030 mm and 890 mm 14 % more or 140 mm
      Width to outside of caterpillar track 2990 mm and 2590 mm 13 % more or 400 mm

      Operation

      Fuel Capacity 400 l. and 249.8 l. 38 % more or 150.2 l.
      Cooling system fluid volume 26 l. and 22 l. 15 % more or 4 l.
      Hydraulic system fluid volume 240 l. and 132.5 l. 45 % more or 107.5 l.
      Engine oil volume 23 l. and 13 l. 43 % more or 10 l.
      Boom reach drive mechanism fluid volume 6.2 l. and 2.8 l. 55 % more or 3.4 l.

      Motor

      Displacement 5.2 l. and 4.5 l. 13 % more or 0.7 l.
      Torque measured at 1500 rev / min and 1300 rev / min 13 % more or 200 rev
      Maximum torque 655 Nm and 330.8 Nm 49 % more or 324.2 Nm
      Effective power 122 kW and 59.7 kW 51 % more or 62.3 kW

      Carrier

      Support rollers number on either side 2 and 1 50 % more or 1
      Rolling bearings number on either side 8 and 6 25 % more or 2
      Track shoes number per side 49 and 41 16 % more or 8

      Booms/sections features 2

      Maximum excavation depth 6670 mm and 5510.8 mm 17 % more or 1159.2 mm
      Maximum radius along ground level 9750 mm and 7873 mm 19 % more or 1877 mm
      Maximum loading height 7180 mm and 6096 mm 15 % more or 1084 mm
      Maximum vertical wall digging depth 5990 mm and 5004.8 mm 16 % more or 985.2 mm

      Booms/sections features 1

      Maximum loading height 6830 mm and 5815.6 mm 15 % more or 1014.4 mm
      Maximum vertical wall digging depth 5300 mm and 4495.8 mm 15 % more or 804.2 mm
      Maximum excavation depth 6180 mm and 4953 mm 20 % more or 1227 mm
      Maximum radius along ground level 9250 mm and 7467.6 mm 19 % more or 1782.4 mm

      5 reasons to buy John Deere 110:

      Swing device

      Rotation speed 13.5 rev / min and 13.3 rev / min 1 % more or 0.2 rev

      Operation

      Hydraulic system overflow valve pressure 34335.9 kPa and 34300 kPa 0 % more or 35.9 kPa
      Hydraulic pump flow rate 98.4 l/min and 424 l/min 77 % less or 325.6 l/min

      Motor

      Power measured at 2200 rev / min and 2000 rev / min 9 % more or 200 rev

      Carrier

      Specific ground pressure 34.3 kPa and 42 kPa 18 % less or 7.7 kPa

      Neutral reasons:

      Sizes

      Height to cab upper part 2950 mm and 2720 mm
      Rear platform swing radius 2750 mm and 2100 mm
      Caterpillar track length on ground level 3660 mm and 2620 mm

      Operation

      Working weight 20400 kg and 12292.4 kg

      Motor

      Aspiration Turbocharging with intercooler and turbocharging
      Manufacturer Isuzu and John Deere
      Model AI-4HK1X and 4045 T

      Carrier

      Maximum travel speed 5.5 km/h and 5.5 km/h
      Track width 2390 mm and 1990 mm
      Shoe dimensions 600 mm and 600 mm

      Booms/sections features 2

      Unit load-transfer length 9520 mm and 8052.8 mm
      Maximum cut height 10040 mm and 8229.6 mm
      Unit load-transfer height 2940 mm and 2720 mm

      Booms/sections features 1

      Unit load-transfer height 3180 mm and 2720 mm
      Unit load-transfer length 9605 mm and 7568.2 mm
      Maximum cut height 9670 mm and 7976.6 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2990 mm 2. Width to outside of caterpillar track 2590 mm
      4. Caterpillar track length on ground level 3660 mm 4. Caterpillar track length on ground level 2620 mm
      5. Clearance 450 mm 5. Clearance 440 mm
      7. Height to cab upper part 2950 mm 7. Height to cab upper part 2720 mm
      8. Rear platform swing radius 2750 mm 8. Rear platform swing radius 2100 mm
      15. Counterweight ground clearance 1030 mm 15. Counterweight ground clearance 890 mm

      Carrier

      6. Track width 2390 mm 6. Track width 1990 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      12. Maximum vertical wall digging depth 5990 mm 12. Maximum vertical wall digging depth 5004.8 mm
      13. Maximum excavation depth 6670 mm 13. Maximum excavation depth 5510.8 mm
      1. Unit load-transfer length 9520 mm 1. Unit load-transfer length 7568.2 mm
      3. Unit load-transfer height 2940 mm 3. Unit load-transfer height 2720 mm
      9. Maximum cut height 10040 mm 9. Maximum cut height 7976.6 mm
      10. Maximum loading height 7180 mm 10. Maximum loading height 5815.6 mm
      11. Maximum radius along ground level 9750 mm 11. Maximum radius along ground level 7467.6 mm