- Home/
- Comparison/
- Hydraulic Shovel/
- Hitachi ZX225US vs. Kato HD1430III
Hitachi ZX225US vs. Kato HD1430III
8 reasons to buy Hitachi ZX225US:
Swing device
Rotation speed | 13.3 rev / min and 10 rev / min | 25 % more or 3.3 rev |
Operation
Generator current strength | 50 amperes and 35 amperes | 30 % more or 15 amperes |
Hydraulic system overflow valve pressure | 34335.9 kPa and 32900 kPa | 4 % more or 1435.9 kPa |
Hydraulic pump flow rate | 388 l/min and 602 l/min | 36 % less or 214 l/min |
Carrier
Specific ground pressure | 52 kPa and 61 kPa | 15 % less or 9 kPa |
Booms/sections features 3
Maximum loading height | 9190 mm and 7570 mm | 18 % more or 1620 mm |
Booms/sections features 2
Maximum loading height | 8190 mm and 7280 mm | 11 % more or 910 mm |
Booms/sections features 1
Maximum loading height | 7640 mm and 7110 mm | 7 % more or 530 mm |
21 reasons to buy Kato HD1430III:
Sizes
Counterweight ground clearance | 1130 mm and 1005 mm | 11 % more or 125 mm |
Width to outside of caterpillar track | 3200 mm and 2800 mm | 12 % more or 400 mm |
Clearance | 500 mm and 450 mm | 10 % more or 50 mm |
Shovel
Maximum bucket volume | 1.8 m3 and 1.2 m3 | 33 % more or 0.6 m3 |
Operation
Fuel Capacity | 580 l. and 270 l. | 53 % more or 310 l. |
Cooling system fluid volume | 36 l. and 23 l. | 36 % more or 13 l. |
Hydraulic system fluid volume | 485 l. and 200 l. | 59 % more or 285 l. |
Engine oil volume | 32 l. and 25 l. | 22 % more or 7 l. |
Boom reach drive mechanism fluid volume | 11.3 l. and 6.2 l. | 45 % more or 5.1 l. |
Motor
Power measured at | 2150 rev / min and 2100 rev / min | 2 % more or 50 rev |
Displacement | 7.5 l. and 6.5 l. | 13 % more or 1.0 l. |
Torque measured at | 1800 rev / min and 1600 rev / min | 11 % more or 200 rev |
Maximum torque | 831 Nm and 550 Nm | 34 % more or 281 Nm |
Carrier
Track shoes number per side | 48 and 46 | 4 % more or 2 |
Maximum travel speed | 5.5 km/h and 5.3 km/h | 4 % more or 0.2 km/h |
Booms/sections features 3
Maximum excavation depth | 8400 mm and 8290 mm | 1 % more or 110 mm |
Maximum vertical wall digging depth | 7480 mm and 7350 mm | 2 % more or 130 mm |
Booms/sections features 2
Maximum excavation depth | 7400 mm and 6790 mm | 8 % more or 610 mm |
Maximum vertical wall digging depth | 6560 mm and 5920 mm | 10 % more or 640 mm |
Booms/sections features 1
Maximum excavation depth | 6720 mm and 6100 mm | 9 % more or 620 mm |
Maximum vertical wall digging depth | 5740 mm and 5000 mm | 13 % more or 740 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 1680 mm and 3460 mm |
Caterpillar track length on ground level | 3370 mm and 3740 mm |
Height to cab upper part | 2950 mm and 3020 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 23000 kg and 30200 kg |
Motor
Aspiration | Turbocharging with intercooler and turbocharging |
Cylinders number | 6 and 6 |
Manufacturer | Isuzu and Mitsubishi |
Model | AA-6BGIT and C 6D16-TLE2A |
Carrier
Track width | 2200 mm and 2600 mm |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Rolling bearings number on either side | 7 and 7 |
Booms/sections features 3
Maximum cut height | 12100 mm and 10610 mm |
Booms/sections features 2
Maximum cut height | 11100 mm and 10330 mm |
Booms/sections features 1
Maximum cut height | 10550 mm and 10140 mm |
Images
Sizes
8. Rear platform swing radius | 1680 mm | 8. Rear platform swing radius | 3460 mm |
2. Width to outside of caterpillar track | 2800 mm | 2. Width to outside of caterpillar track | 3200 mm |
15. Counterweight ground clearance | 1005 mm | 15. Counterweight ground clearance | 1130 mm |
4. Caterpillar track length on ground level | 3370 mm | 4. Caterpillar track length on ground level | 3740 mm |
5. Clearance | 450 mm | 5. Clearance | 500 mm |
7. Height to cab upper part | 2950 mm | 7. Height to cab upper part | 3020 mm |
Carrier
6. Track width | 2200 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
13. Maximum excavation depth | 6790 mm | 13. Maximum excavation depth | 8400 mm |
9. Maximum cut height | 12100 mm | 9. Maximum cut height | 10610 mm |
10. Maximum loading height | 9190 mm | 10. Maximum loading height | 7570 mm |
12. Maximum vertical wall digging depth | 7350 mm | 12. Maximum vertical wall digging depth | 7480 mm |