- Home/
- Comparison/
- Hydraulic Shovel/
- Hyundai R140LC-7A vs. Kato HD512III
Hyundai R140LC-7A vs. Kato HD512III
11 reasons to buy Hyundai R140LC-7A:
Swing device
Rotation speed | 13.1 rev / min and 12.5 rev / min | 5 % more or 0.6 rev |
Sizes
Width to outside of caterpillar track | 2600 mm and 2490 mm | 4 % more or 110 mm |
Counterweight ground clearance | 935 mm and 880 mm | 6 % more or 55 mm |
Operation
Cooling system fluid volume | 22 l. and 18 l. | 18 % more or 4 l. |
Hydraulic system fluid volume | 210 l. and 155 l. | 26 % more or 55 l. |
Engine oil volume | 18.5 l. and 17 l. | 8 % more or 1.5 l. |
Motor
Full power | 88.7 kW and 68 kW | 23 % more or 20.7 kW |
Displacement | 69.6 l. and 3.9 l. | 94 % more or 65.7 l. |
Torque measured at | 1700 rev / min and 1600 rev / min | 6 % more or 100 rev |
Maximum torque | 445.2 Nm and 360 Nm | 19 % more or 85.2 Nm |
Carrier
Track shoes number per side | 46 and 44 | 4 % more or 2 |
15 reasons to buy Kato HD512III:
Operation
Fuel Capacity | 275 l. and 270 l. | 2 % more or 5 l. |
Hydraulic system overflow valve pressure | 32900 kPa and 224.6 kPa | 99 % more or 32675.4 kPa |
Hydraulic pump flow rate | 242 l/min and 260 l/min | 7 % less or 18 l/min |
Motor
Power measured at | 2050 rev / min and 2000 rev / min | 2 % more or 50 rev |
Carrier
Maximum travel speed | 5.5 km/h and 5.1 km/h | 7 % more or 0.4 km/h |
Hook traction force | 100 kN and 130.4 kN | 23 % less or 30.4 kN |
Booms/sections features 3
Maximum vertical wall digging depth | 5470 mm and 4840 mm | 12 % more or 630 mm |
Maximum excavation depth | 6130 mm and 5300 mm | 14 % more or 830 mm |
Maximum loading height | 6520 mm and 6300 mm | 3 % more or 220 mm |
Booms/sections features 2
Maximum loading height | 6240 mm and 5980 mm | 4 % more or 260 mm |
Maximum vertical wall digging depth | 5070 mm and 4310 mm | 15 % more or 760 mm |
Maximum excavation depth | 5620 mm and 4900 mm | 13 % more or 720 mm |
Booms/sections features 1
Maximum excavation depth | 5220 mm and 4700 mm | 10 % more or 520 mm |
Maximum loading height | 6010 mm and 5900 mm | 2 % more or 110 mm |
Maximum vertical wall digging depth | 4670 mm and 4180 mm | 10 % more or 490 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2820 mm and 2710 mm |
Clearance | 440 mm and 440 mm |
Rear platform swing radius | 2310 mm and 2120 mm |
Caterpillar track length on ground level | 3000 mm and 2870 mm |
Operation
Boom reach drive mechanism fluid volume | 2.5 l. and 2.5 l. |
Operating voltage | 24 V and 24 V |
Generator current strength | 50 amperes and 50 amperes |
Working weight | 13980 kg and 12100 kg |
Motor
Manufacturer | Mitsubishi and Mitsubishi |
Model | D04FD-TAA and C 4D34-TLE2A |
Cylinders number | 4 and 4 |
Aspiration | turbocharging and turbocharging |
Carrier
Track width | 2000 mm and 1990 mm |
Shoe dimensions | 600 mm and 500 mm |
Booms/sections features 3
Maximum cut height | 8740 mm and 8870 mm |
Booms/sections features 2
Unit load-transfer length | 7810 mm and 7620 mm |
Maximum cut height | 8410 mm and 8610 mm |
Booms/sections features 1
Maximum cut height | 8340 mm and 8380 mm |
Images
Sizes
7. Height to cab upper part | 2820 mm | 7. Height to cab upper part | 2710 mm |
8. Rear platform swing radius | 2310 mm | 8. Rear platform swing radius | 2120 mm |
15. Counterweight ground clearance | 935 mm | 15. Counterweight ground clearance | 880 mm |
2. Width to outside of caterpillar track | 2600 mm | 2. Width to outside of caterpillar track | 2490 mm |
4. Caterpillar track length on ground level | 3000 mm | 4. Caterpillar track length on ground level | 2870 mm |
5. Clearance | 440 mm | 5. Clearance | 440 mm |
Carrier
6. Track width | 2000 mm | 6. Track width | 1990 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 500 mm |
Booms/sections features 1
10. Maximum loading height | 6560 mm | 10. Maximum loading height | 6240 mm |
12. Maximum vertical wall digging depth | 4840 mm | 12. Maximum vertical wall digging depth | 5070 mm |
13. Maximum excavation depth | 5800 mm | 13. Maximum excavation depth | 5620 mm |
1. Unit load-transfer length | 7810 mm | 1. Unit load-transfer length | 7620 mm |
9. Maximum cut height | 9010 mm | 9. Maximum cut height | 8870 mm |