- Home/
- Comparison/
- Hydraulic Shovel/
- Hyundai R250NLC-7 vs. Kato HD1023IILC
Hyundai R250NLC-7 vs. Kato HD1023IILC
10 reasons to buy Hyundai R250NLC-7:
Swing device
Rotation speed | 12.6 rev / min and 11 rev / min | 13 % more or 1.6 rev |
Sizes
Counterweight ground clearance | 1115 mm and 1100 mm | 1 % more or 15 mm |
Shovel
Bucket initial volume | 1.1 m3 and 1 m3 | 9 % more or 0.1 m3 |
Operation
Engine oil volume | 24 l. and 22 l. | 8 % more or 2 l. |
Generator current strength | 50 amperes and 35 amperes | 30 % more or 15 amperes |
Hydraulic pump flow rate | 448 l/min and 494 l/min | 9 % less or 46 l/min |
Cooling system fluid volume | 35 l. and 25.5 l. | 27 % more or 9.5 l. |
Hydraulic system fluid volume | 300 l. and 290 l. | 3 % more or 10 l. |
Motor
Full power | 129 kW and 125 kW | 3 % more or 4 kW |
Maximum torque | 707.7 Nm and 598 Nm | 16 % more or 109.7 Nm |
12 reasons to buy Kato HD1023IILC:
Sizes
Width to outside of caterpillar track | 3200 mm and 2980 mm | 7 % more or 220 mm |
Operation
Boom reach drive mechanism fluid volume | 11.3 l. and 6 l. | 47 % more or 5.3 l. |
Hydraulic system overflow valve pressure | 32900 kPa and 32336.4 kPa | 2 % more or 563.6 kPa |
Fuel Capacity | 380 l. and 340 l. | 11 % more or 40 l. |
Motor
Power measured at | 2150 rev / min and 2000 rev / min | 7 % more or 150 rev |
Torque measured at | 1600 rev / min and 1500 rev / min | 6 % more or 100 rev |
Carrier
Specific ground pressure | 47.1 kPa and 50 kPa | 6 % less or 2.9 kPa |
Maximum travel speed | 5.5 km/h and 3.4 km/h | 38 % more or 2.1 km/h |
Hook traction force | 186.3 kN and 216 kN | 14 % less or 29.7 kN |
Booms/sections features 1
Maximum excavation depth | 6520 mm and 6050 mm | 7 % more or 470 mm |
Maximum loading height | 6810 mm and 6360 mm | 7 % more or 450 mm |
Maximum vertical wall digging depth | 5750 mm and 5480 mm | 5 % more or 270 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2965 mm and 2940 mm |
Height to cab upper part | 2990 mm and 2940 mm |
Clearance | 480 mm and 480 mm |
Shovel
Maximum bucket volume | 1.5 m3 and 1.5 m3 |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 25083.7 kg and 23600 kg |
Motor
Manufacturer | Cummins and Mitsubishi |
Model | B5.9-C and C 6D34-TL |
Displacement | 5.9 l. and 5.9 l. |
Aspiration | turbocharging and turbocharging |
Cylinders number | 6 and 6 |
Carrier
Track shoes number per side | 51 and 51 |
Shoe dimensions | 600 mm and 600 mm |
Support rollers number on either side | 2 and 2 |
Rolling bearings number on either side | 9 and 9 |
Track width | 2380 mm and 2600 mm |
Booms/sections features 1
Maximum cut height | 9450 mm and 9880 mm |
Images
Sizes
7. Height to cab upper part | 2990 mm | 7. Height to cab upper part | 2940 mm |
8. Rear platform swing radius | 2965 mm | 8. Rear platform swing radius | 2940 mm |
15. Counterweight ground clearance | 1115 mm | 15. Counterweight ground clearance | 1100 mm |
2. Width to outside of caterpillar track | 2980 mm | 2. Width to outside of caterpillar track | 3200 mm |
5. Clearance | 480 mm | 5. Clearance | 480 mm |
Carrier
6. Track width | 2380 mm | 6. Track width | 2600 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
9. Maximum cut height | 9450 mm | 9. Maximum cut height | 10500 mm |
10. Maximum loading height | 6360 mm | 10. Maximum loading height | 7440 mm |
12. Maximum vertical wall digging depth | 5480 mm | 12. Maximum vertical wall digging depth | 7190 mm |
13. Maximum excavation depth | 6050 mm | 13. Maximum excavation depth | 8010 mm |