vs.

      Hyundai R380LC-9 vs. Doosan DX255LC

      34 reasons to buy Hyundai R380LC-9:

      Sizes

      Width to outside of caterpillar track 3440 mm and 3200 mm 7 % more or 240 mm
      Clearance 550 mm and 450 mm 18 % more or 100 mm
      Counterweight ground clearance 1290 mm and 1110 mm 14 % more or 180 mm

      Shovel

      Bucket initial volume 1.6 m3 and 1.1 m3 31 % more or 0.5 m3
      Maximum bucket volume 2.1 m3 and 1.4 m3 33 % more or 0.7 m3

      Operation

      Boom reach drive mechanism fluid volume 8 l. and 5 l. 37 % more or 3 l.
      Engine oil volume 33.5 l. and 27 l. 19 % more or 6.5 l.
      Hydraulic system overflow valve pressure 32853.5 kPa and 32300 kPa 2 % more or 553.5 kPa
      Fuel Capacity 550 l. and 410 l. 25 % more or 140 l.
      Cooling system fluid volume 45 l. and 25 l. 44 % more or 20 l.

      Motor

      Full power 220.7 kW and 129 kW 42 % more or 91.7 kW
      Effective power 202.1 kW and 123.8 kW 39 % more or 78.3 kW
      Displacement 8.8 l. and 5.9 l. 33 % more or 2.9 l.
      Maximum torque 1450.7 Nm and 765 Nm 47 % more or 685.7 Nm

      Booms/sections features 5

      Maximum loading height 7120 mm and 6010 mm 16 % more or 1110 mm
      Maximum vertical wall digging depth 5490 mm and 4035 mm 27 % more or 1455 mm
      Maximum excavation depth 6450 mm and 5880 mm 9 % more or 570 mm
      Maximum radius along ground level 10100 mm and 8859 mm 12 % more or 1241 mm

      Booms/sections features 4

      Maximum radius along ground level 12180 mm and 8481 mm 30 % more or 3699 mm
      Maximum loading height 8160 mm and 5990 mm 27 % more or 2170 mm
      Maximum vertical wall digging depth 7540 mm and 4015 mm 47 % more or 3525 mm
      Maximum excavation depth 8620 mm and 5380 mm 38 % more or 3240 mm

      Booms/sections features 3

      Maximum excavation depth 8220 mm and 7315 mm 11 % more or 905 mm
      Maximum radius along ground level 11670 mm and 10488 mm 10 % more or 1182 mm
      Maximum loading height 7640 mm and 7160 mm 6 % more or 480 mm
      Maximum vertical wall digging depth 7040 mm and 5690 mm 19 % more or 1350 mm

      Booms/sections features 2

      Maximum vertical wall digging depth 6330 mm and 5225 mm 17 % more or 1105 mm
      Maximum loading height 7410 mm and 6925 mm 7 % more or 485 mm
      Maximum excavation depth 7520 mm and 6815 mm 9 % more or 705 mm
      Maximum radius along ground level 11040 mm and 10010 mm 9 % more or 1030 mm

      Booms/sections features 1

      Maximum excavation depth 6820 mm and 6315 mm 7 % more or 505 mm
      Maximum radius along ground level 10490 mm and 9515 mm 9 % more or 975 mm
      Maximum loading height 7370 mm and 6645 mm 10 % more or 725 mm
      Maximum vertical wall digging depth 5930 mm and 4595 mm 23 % more or 1335 mm

      6 reasons to buy Doosan DX255LC:

      Swing device

      Rotation speed 10 rev / min and 9.3 rev / min 7 % more or 0.7 rev

      Operation

      Hydraulic pump flow rate 438 l/min and 2180.4 l/min 80 % less or 1742.4 l/min

      Motor

      Power measured at 1900 rev / min and 1850 rev / min 3 % more or 50 rev

      Carrier

      Rolling bearings number on either side 10 and 9 10 % more or 1
      Specific ground pressure 49 kPa and 57.8 kPa 15 % less or 8.8 kPa
      Maximum travel speed 5.2 km/h and 4.8 km/h 8 % more or 0.4 km/h

      Neutral reasons:

      Sizes

      Caterpillar track length on ground level 4340 mm and 3835 mm
      Height to cab upper part 3175 mm and 2970 mm
      Rear platform swing radius 3415 mm and 2995 mm

      Operation

      Operating voltage 24 V and 24 V
      Generator current strength 50 amperes and 50 amperes
      Working weight 38650 kg and 24599.7 kg
      Hydraulic system fluid volume 410 l. and 410 l.

      Motor

      Manufacturer Cummins and Doosan
      Model QSL and DL06
      Torque measured at 1400 rev / min and 1400 rev / min
      Aspiration turbocharging and Turbocharged engine with intermediate cooling of charging air by oncoming air flow

      Carrier

      Track shoes number per side 51 and 51
      Shoe dimensions 700 mm and 600 mm
      Support rollers number on either side 2 and 2

      Booms/sections features 5

      Maximum cut height 10320 mm and 8610 mm
      Unit load-transfer height 3760 mm and 3180 mm
      Unit load-transfer length 10880 mm and 9470 mm

      Booms/sections features 4

      Maximum cut height 11360 mm and 8685 mm
      Unit load-transfer height 4300 mm and 3410 mm
      Unit load-transfer length 11110 mm and 9555 mm

      Booms/sections features 3

      Unit load-transfer height 3880 mm and 3290 mm
      Unit load-transfer length 11160 mm and 10080 mm
      Maximum cut height 10800 mm and 9845 mm

      Booms/sections features 2

      Unit load-transfer height 3450 mm and 3100 mm
      Unit load-transfer length 11120 mm and 10055 mm
      Maximum cut height 10570 mm and 9605 mm

      Booms/sections features 1

      Unit load-transfer length 11240 mm and 10100 mm
      Maximum cut height 10590 mm and 9300 mm
      Unit load-transfer height 3710 mm and 3180 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3440 mm 2. Width to outside of caterpillar track 3200 mm
      8. Rear platform swing radius 3415 mm 8. Rear platform swing radius 2995 mm
      4. Caterpillar track length on ground level 4340 mm 4. Caterpillar track length on ground level 3835 mm
      15. Counterweight ground clearance 1290 mm 15. Counterweight ground clearance 1110 mm
      5. Clearance 550 mm 5. Clearance 450 mm
      7. Height to cab upper part 3175 mm 7. Height to cab upper part 2970 mm

      Carrier

      14. Shoe dimensions 700 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      10. Maximum loading height 8160 mm 10. Maximum loading height 5990 mm
      11. Maximum radius along ground level 11670 mm 11. Maximum radius along ground level 8481 mm
      13. Maximum excavation depth 8220 mm 13. Maximum excavation depth 5380 mm
      1. Unit load-transfer length 11110 mm 1. Unit load-transfer length 9470 mm
      3. Unit load-transfer height 4300 mm 3. Unit load-transfer height 3180 mm
      9. Maximum cut height 11360 mm 9. Maximum cut height 8610 mm
      12. Maximum vertical wall digging depth 7040 mm 12. Maximum vertical wall digging depth 5690 mm