- Home/
- Comparison/
- Hydraulic Shovel/
- Hyundai R450-7 vs. John Deere 160C LC
Hyundai R450-7 vs. John Deere 160C LC
23 reasons to buy Hyundai R450-7:
Sizes
Width to outside of caterpillar track | 3340 mm and 2590 mm | 22 % more or 750 mm |
Clearance | 555 mm and 470 mm | 15 % more or 85 mm |
Counterweight ground clearance | 1340 mm and 1000 mm | 25 % more or 340 mm |
Shovel
Maximum bucket volume | 3.2 m3 and 1.3 m3 | 59 % more or 1.9 m3 |
Operation
Fuel Capacity | 610 l. and 280.1 l. | 54 % more or 329.9 l. |
Cooling system fluid volume | 50 l. and 26.5 l. | 47 % more or 23.5 l. |
Hydraulic system fluid volume | 380 l. and 170 l. | 55 % more or 210 l. |
Engine oil volume | 37.9 l. and 14 l. | 63 % more or 23.9 l. |
Boom reach drive mechanism fluid volume | 5 l. and 4.5 l. | 10 % more or 0.5 l. |
Generator current strength | 50 amperes and 45 amperes | 10 % more or 5 amperes |
Motor
Cylinders number | 6 and 4 | 33 % more or 2 |
Effective power | 238.6 kW and 81.3 kW | 66 % more or 157.3 kW |
Displacement | 10.8 l. and 4.5 l. | 58 % more or 6.3 l. |
Maximum torque | 1789.7 Nm and 409.5 Nm | 77 % more or 1380.2 Nm |
Carrier
Track shoes number per side | 49 and 43 | 12 % more or 6 |
Booms/sections features 2
Maximum excavation depth | 7310 mm and 6360 mm | 13 % more or 950 mm |
Maximum radius along ground level | 11340 mm and 9030 mm | 20 % more or 2310 mm |
Maximum loading height | 7240 mm and 6528.8 mm | 10 % more or 711.2 mm |
Maximum vertical wall digging depth | 5850 mm and 5562.6 mm | 5 % more or 287.4 mm |
Booms/sections features 1
Maximum excavation depth | 6810 mm and 5850 mm | 14 % more or 960 mm |
Maximum radius along ground level | 10940 mm and 8570 mm | 22 % more or 2370 mm |
Maximum loading height | 7190 mm and 6300.2 mm | 12 % more or 889.8 mm |
Maximum vertical wall digging depth | 5990 mm and 5029.2 mm | 16 % more or 960.8 mm |
7 reasons to buy John Deere 160C LC:
Swing device
Rotation speed | 13.6 rev / min and 10.3 rev / min | 24 % more or 3.3 rev |
Operation
Hydraulic system overflow valve pressure | 34335.9 kPa and 32336.4 kPa | 6 % more or 1999.5 kPa |
Hydraulic pump flow rate | 296 l/min and 760 l/min | 61 % less or 464 l/min |
Motor
Power measured at | 2300 rev / min and 1900 rev / min | 17 % more or 400 rev |
Torque measured at | 1400 rev / min and 1300 rev / min | 7 % more or 100 rev |
Carrier
Specific ground pressure | 37.6 kPa and 74.5 kPa | 50 % less or 36.9 kPa |
Hook traction force | 149.8 kN and 364.8 kN | 59 % less or 215.0 kN |
Neutral reasons:
Sizes
Height to cab upper part | 3250 mm and 2880 mm |
Rear platform swing radius | 3720 mm and 2440 mm |
Caterpillar track length on ground level | 4040 mm and 3100 mm |
Operation
Working weight | 43680.9 kg and 16157 kg |
Operating voltage | 24 V and 24 V |
Motor
Aspiration | turbocharging and Turbocharger with charge air cooler by oncoming air flow |
Manufacturer | Cummins and John Deere |
Model | QSM11-C and 4045H |
Carrier
Support rollers number on either side | 2 and 2 |
Maximum travel speed | 5.3 km/h and 5.3 km/h |
Rolling bearings number on either side | 7 and 7 |
Shoe dimensions | 600 mm and 600 mm |
Booms/sections features 2
Unit load-transfer length | 12160 mm and 8560 mm |
Maximum cut height | 10550 mm and 8991.6 mm |
Unit load-transfer height | 3750 mm and 2880 mm |
Booms/sections features 1
Unit load-transfer height | 3820 mm and 2880 mm |
Unit load-transfer length | 12230 mm and 8530 mm |
Maximum cut height | 10600 mm and 8738.6 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3340 mm | 2. Width to outside of caterpillar track | 2590 mm |
4. Caterpillar track length on ground level | 4040 mm | 4. Caterpillar track length on ground level | 3100 mm |
5. Clearance | 555 mm | 5. Clearance | 470 mm |
7. Height to cab upper part | 3250 mm | 7. Height to cab upper part | 2880 mm |
8. Rear platform swing radius | 3720 mm | 8. Rear platform swing radius | 2440 mm |
15. Counterweight ground clearance | 1340 mm | 15. Counterweight ground clearance | 1000 mm |
Carrier
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
11. Maximum radius along ground level | 11340 mm | 11. Maximum radius along ground level | 9030 mm |
12. Maximum vertical wall digging depth | 5850 mm | 12. Maximum vertical wall digging depth | 5562.6 mm |
13. Maximum excavation depth | 7310 mm | 13. Maximum excavation depth | 6360 mm |
1. Unit load-transfer length | 12000 mm | 1. Unit load-transfer length | 8560 mm |
3. Unit load-transfer height | 3600 mm | 3. Unit load-transfer height | 2880 mm |
9. Maximum cut height | 11030 mm | 9. Maximum cut height | 8991.6 mm |
10. Maximum loading height | 7660 mm | 10. Maximum loading height | 6528.8 mm |