vs.

      Hyundai R450-7A vs. Volvo EC360C

      21 reasons to buy Hyundai R450-7A:

      Sizes

      Clearance 555 mm and 500 mm 10 % more or 55 mm
      Counterweight ground clearance 1340 mm and 1210 mm 10 % more or 130 mm

      Operation

      Hydraulic system overflow valve pressure 35301.1 kPa and 34335.9 kPa 3 % more or 965.2 kPa

      Motor

      Power measured at 1900 rev / min and 1700 rev / min 11 % more or 200 rev
      Torque measured at 1400 rev / min and 1275 rev / min 9 % more or 125 rev
      Maximum torque 1673.1 Nm and 1475.1 Nm 12 % more or 198.0 Nm
      Full power 266.2 kW and 197.6 kW 26 % more or 68.6 kW
      Effective power 238.6 kW and 184.2 kW 23 % more or 54.4 kW

      Carrier

      Maximum travel speed 5 km/h and 4.5 km/h 10 % more or 0.5 km/h

      Booms/sections features 4

      Maximum loading height 7880 mm and 6830 mm 13 % more or 1050 mm
      Maximum vertical wall digging depth 7290 mm and 4800 mm 34 % more or 2490 mm
      Maximum excavation depth 8410 mm and 6720 mm 20 % more or 1690 mm
      Maximum radius along ground level 12470 mm and 10250 mm 18 % more or 2220 mm

      Booms/sections features 3

      Maximum radius along ground level 11900 mm and 11620 mm 2 % more or 280 mm
      Maximum loading height 7660 mm and 7520 mm 2 % more or 140 mm
      Maximum vertical wall digging depth 6560 mm and 6140 mm 6 % more or 420 mm

      Booms/sections features 2

      Maximum radius along ground level 11340 mm and 10970 mm 3 % more or 370 mm
      Maximum vertical wall digging depth 5850 mm and 5510 mm 6 % more or 340 mm

      Booms/sections features 1

      Maximum loading height 7190 mm and 7050 mm 2 % more or 140 mm
      Maximum vertical wall digging depth 5990 mm and 5110 mm 15 % more or 880 mm
      Maximum radius along ground level 10940 mm and 10440 mm 5 % more or 500 mm

      18 reasons to buy Volvo EC360C:

      Swing device

      Rotation speed 9.7 rev / min and 9 rev / min 7 % more or 0.7 rev

      Sizes

      Width to outside of caterpillar track 3540 mm and 3340 mm 6 % more or 200 mm

      Shovel

      Bucket initial volume 2.3 m3 and 2.2 m3 4 % more or 0.1 m3

      Operation

      Hydraulic pump flow rate 560.2 l/min and 720 l/min 22 % less or 159.8 l/min
      Fuel Capacity 620 l. and 610 l. 2 % more or 10 l.
      Cooling system fluid volume 60 l. and 50 l. 17 % more or 10 l.
      Hydraulic system fluid volume 500 l. and 380 l. 24 % more or 120 l.
      Engine oil volume 42 l. and 37.9 l. 10 % more or 4.1 l.
      Boom reach drive mechanism fluid volume 6 l. and 5 l. 17 % more or 1 l.
      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes

      Motor

      Displacement 12.1 l. and 10.8 l. 11 % more or 1.3 l.

      Carrier

      Track shoes number per side 50 and 49 2 % more or 1
      Rolling bearings number on either side 9 and 7 22 % more or 2
      Specific ground pressure 53.1 kPa and 81.4 kPa 35 % less or 28.3 kPa
      Hook traction force 257 kN and 377.2 kN 32 % less or 120.2 kN

      Booms/sections features 3

      Maximum excavation depth 8200 mm and 7790 mm 5 % more or 410 mm

      Booms/sections features 2

      Maximum excavation depth 7490 mm and 7310 mm 2 % more or 180 mm

      Booms/sections features 1

      Maximum excavation depth 6890 mm and 6810 mm 1 % more or 80 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 3720 mm and 3390 mm
      Caterpillar track length on ground level 4040 mm and 4240 mm
      Height to cab upper part 3250 mm and 3197 mm

      Operation

      Working weight 43800 kg and 39267.5 kg
      Operating voltage 24 V and 24 V

      Motor

      Aspiration turbocharging and Turbocharging with intercooler
      Cylinders number 6 and 6
      Manufacturer Cummins and Volvo
      Model QSM11 and D12D EBE3

      Carrier

      Shoe dimensions 600 mm and 800 mm
      Support rollers number on either side 2 and 2
      Track width 2740 mm and 2740 mm

      Booms/sections features 4

      Maximum cut height 11250 mm and 10070 mm
      Unit load-transfer height 4040 mm and 3700 mm
      Unit load-transfer length 11970 mm and 10910 mm

      Booms/sections features 3

      Maximum cut height 11030 mm and 10600 mm
      Unit load-transfer height 3600 mm and 3590 mm
      Unit load-transfer length 12000 mm and 11120 mm

      Booms/sections features 2

      Unit load-transfer height 3750 mm and 3350 mm
      Maximum cut height 10550 mm and 10320 mm
      Unit load-transfer length 12160 mm and 11070 mm
      Maximum loading height 7240 mm and 7240 mm

      Booms/sections features 1

      Maximum cut height 10600 mm and 10160 mm
      Unit load-transfer height 3820 mm and 3580 mm
      Unit load-transfer length 12230 mm and 11160 mm

      Images

      Sizes

      7. Height to cab upper part 3250 mm 7. Height to cab upper part 3197 mm
      2. Width to outside of caterpillar track 3340 mm 2. Width to outside of caterpillar track 3540 mm
      8. Rear platform swing radius 3720 mm 8. Rear platform swing radius 3390 mm
      4. Caterpillar track length on ground level 4040 mm 4. Caterpillar track length on ground level 4240 mm
      15. Counterweight ground clearance 1340 mm 15. Counterweight ground clearance 1210 mm
      5. Clearance 555 mm 5. Clearance 500 mm

      Carrier

      6. Track width 2740 mm 6. Track width 2740 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 800 mm

      Booms/sections features 1

      10. Maximum loading height 6810 mm 10. Maximum loading height 7520 mm
      11. Maximum radius along ground level 10370 mm 11. Maximum radius along ground level 11620 mm
      13. Maximum excavation depth 6810 mm 13. Maximum excavation depth 8200 mm
      12. Maximum vertical wall digging depth 5990 mm 12. Maximum vertical wall digging depth 6140 mm
      1. Unit load-transfer length 12160 mm 1. Unit load-transfer length 10910 mm
      3. Unit load-transfer height 3750 mm 3. Unit load-transfer height 3700 mm
      9. Maximum cut height 10550 mm 9. Maximum cut height 10070 mm