vs.

      John Deere 120D vs. Hyundai R250LC-7 High Chassis

      7 reasons to buy John Deere 120D:

      Swing device

      Rotation speed 13.3 rev / min and 12.6 rev / min 5 % more or 0.7 rev

      Operation

      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes
      Hydraulic system overflow valve pressure 34335.9 kPa and 32336.4 kPa 6 % more or 1999.5 kPa
      Hydraulic pump flow rate 210 l/min and 448 l/min 53 % less or 238 l/min

      Carrier

      Specific ground pressure 37 kPa and 52 kPa 29 % less or 15 kPa
      Hook traction force 110 kN and 216 kN 49 % less or 106 kN

      Booms/sections features 2

      Maximum vertical wall digging depth 5500 mm and 5300 mm 4 % more or 200 mm

      20 reasons to buy Hyundai R250LC-7 High Chassis:

      Sizes

      Width to outside of caterpillar track 3390 mm and 2590 mm 24 % more or 800 mm
      Clearance 765 mm and 440 mm 42 % more or 325 mm
      Counterweight ground clearance 1470 mm and 890 mm 39 % more or 580 mm

      Operation

      Fuel Capacity 340 l. and 250 l. 26 % more or 90 l.
      Cooling system fluid volume 45 l. and 20 l. 56 % more or 25 l.
      Hydraulic system fluid volume 300 l. and 132.5 l. 56 % more or 167.5 l.
      Engine oil volume 24 l. and 14 l. 42 % more or 10 l.

      Motor

      Displacement 5.9 l. and 4.5 l. 24 % more or 1.4 l.
      Cylinders number 6 and 4 33 % more or 2
      Effective power 121.5 kW and 69.4 kW 43 % more or 52.1 kW

      Carrier

      Rolling bearings number on either side 9 and 7 22 % more or 2
      Support rollers number on either side 2 and 1 50 % more or 1
      Track shoes number per side 51 and 44 14 % more or 7

      Booms/sections features 2

      Maximum excavation depth 6080 mm and 6060 mm 0 % more or 20 mm
      Maximum radius along ground level 9160 mm and 8670 mm 5 % more or 490 mm
      Maximum loading height 6790 mm and 6490 mm 4 % more or 300 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 5120 mm and 5020 mm 2 % more or 100 mm
      Maximum excavation depth 5680 mm and 5570 mm 2 % more or 110 mm
      Maximum radius along ground level 9280 mm and 8200 mm 12 % more or 1080 mm
      Maximum loading height 6730 mm and 6160 mm 8 % more or 570 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2740 mm and 3345 mm
      Rear platform swing radius 2130 mm and 2965 mm
      Caterpillar track length on ground level 2880 mm and 4030 mm

      Operation

      Working weight 13826 kg and 27451.4 kg
      Operating voltage 24 V and 24 V

      Motor

      Power measured at 2000 rev / min and 2000 rev / min
      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging
      Manufacturer John Deere and Cummins
      Model 4045H, III Level III certified and B5.9-C

      Carrier

      Shoe dimensions 600 mm and 600 mm
      Maximum travel speed 5.5 km/h and 5.5 km/h
      Track width 1980 mm and 2790 mm

      Booms/sections features 2

      Unit load-transfer length 7670 mm and 9970 mm
      Unit load-transfer height 2740 mm and 3750 mm
      Maximum cut height 8900 mm and 9840 mm

      Booms/sections features 1

      Unit load-transfer height 2740 mm and 3610 mm
      Unit load-transfer length 7660 mm and 10060 mm
      Maximum cut height 8570 mm and 9820 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 2590 mm 2. Width to outside of caterpillar track 3390 mm
      4. Caterpillar track length on ground level 2880 mm 4. Caterpillar track length on ground level 4030 mm
      5. Clearance 440 mm 5. Clearance 765 mm
      7. Height to cab upper part 2740 mm 7. Height to cab upper part 3345 mm
      8. Rear platform swing radius 2130 mm 8. Rear platform swing radius 2965 mm
      15. Counterweight ground clearance 890 mm 15. Counterweight ground clearance 1470 mm

      Carrier

      6. Track width 1980 mm 6. Track width 2790 mm
      14. Shoe dimensions 600 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      12. Maximum vertical wall digging depth 5020 mm 12. Maximum vertical wall digging depth 5120 mm
      13. Maximum excavation depth 6060 mm 13. Maximum excavation depth 5680 mm
      1. Unit load-transfer length 7660 mm 1. Unit load-transfer length 9970 mm
      3. Unit load-transfer height 2740 mm 3. Unit load-transfer height 3750 mm
      9. Maximum cut height 8570 mm 9. Maximum cut height 9840 mm
      10. Maximum loading height 6160 mm 10. Maximum loading height 6790 mm
      11. Maximum radius along ground level 8200 mm 11. Maximum radius along ground level 9160 mm