- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 160D LC vs. John Deere 650D LC
John Deere 160D LC vs. John Deere 650D LC
8 reasons to buy John Deere 160D LC:
Swing device
Rotation speed | 13.3 rev / min and 9.5 rev / min | 29 % more or 3.8 rev |
Operation
Hydraulic system overflow valve pressure | 34335.9 kPa and 34300 kPa | 0 % more or 35.9 kPa |
Hydraulic pump flow rate | 382 l/min and 456 l/min | 16 % less or 74 l/min |
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Motor
Power measured at | 2200 rev / min and 1800 rev / min | 18 % more or 400 rev |
Carrier
Specific ground pressure | 42.5 kPa and 69.6 kPa | 39 % less or 27.1 kPa |
Maximum travel speed | 5.3 km/h and 4.9 km/h | 8 % more or 0.4 km/h |
Hook traction force | 169.2 kN and 452.2 kN | 63 % less or 283.0 kN |
23 reasons to buy John Deere 650D LC:
Swing device
Swing torque | 193804 Nm and 43864.8 Nm | 77 % more or 149939.2 Nm |
Sizes
Clearance | 860 mm and 470 mm | 45 % more or 390 mm |
Counterweight ground clearance | 1520 mm and 1001 mm | 34 % more or 519 mm |
Width to outside of caterpillar track | 4190 mm and 2600 mm | 38 % more or 1590 mm |
Operation
Engine oil volume | 51.5 l. and 15 l. | 71 % more or 36.5 l. |
Boom reach drive mechanism fluid volume | 18 l. and 5.7 l. | 68 % more or 12.3 l. |
Fuel Capacity | 901 l. and 320 l. | 64 % more or 581 l. |
Cooling system fluid volume | 55.8 l. and 22 l. | 61 % more or 33.8 l. |
Hydraulic system fluid volume | 720 l. and 196.8 l. | 73 % more or 523.2 l. |
Motor
Effective power | 345 kW and 90.2 kW | 74 % more or 254.8 kW |
Displacement | 15.7 l. and 4.5 l. | 71 % more or 11.2 l. |
Cylinders number | 6 and 4 | 33 % more or 2 |
Carrier
Track shoes number per side | 47 and 43 | 9 % more or 4 |
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Booms/sections features 2
Maximum excavation depth | 9140 mm and 6490 mm | 29 % more or 2650 mm |
Maximum radius along ground level | 13610 mm and 9160 mm | 33 % more or 4450 mm |
Maximum loading height | 8330 mm and 6400 mm | 23 % more or 1930 mm |
Maximum vertical wall digging depth | 8180 mm and 5690 mm | 30 % more or 2490 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 7390 mm and 5160 mm | 30 % more or 2230 mm |
Maximum excavation depth | 8530 mm and 5980 mm | 30 % more or 2550 mm |
Maximum radius along ground level | 13000 mm and 8700 mm | 33 % more or 4300 mm |
Maximum loading height | 8050 mm and 6170 mm | 23 % more or 1880 mm |
Neutral reasons:
Sizes
Height to cab upper part | 2950 mm and 3450 mm |
Rear platform swing radius | 2490 mm and 3710 mm |
Caterpillar track length on ground level | 3100 mm and 4600 mm |
Operation
Operating voltage | 24 V and 24 V |
Working weight | 17920.5 kg and 69033 kg |
Motor
Manufacturer | John Deere and Isuzu |
Model | 4045H and AH-6WG1XYSA-02 |
Aspiration | Turbocharger with charge air cooler by oncoming air flow and Turbocharging with charge air cooler |
Carrier
Shoe dimensions | 600 mm and 900 mm |
Track width | 2600 mm and 3300 mm |
Booms/sections features 2
Unit load-transfer height | 3110 mm and 4980 mm |
Unit load-transfer length | 8580 mm and 13210 mm |
Maximum cut height | 9130 mm and 12240 mm |
Booms/sections features 1
Unit load-transfer length | 8550 mm and 13210 mm |
Unit load-transfer height | 2870 mm and 4470 mm |
Maximum cut height | 8880 mm and 11910 mm |
Images
Sizes
2. Width to outside of caterpillar track | 2600 mm | 2. Width to outside of caterpillar track | 4190 mm |
4. Caterpillar track length on ground level | 3100 mm | 4. Caterpillar track length on ground level | 4600 mm |
5. Clearance | 470 mm | 5. Clearance | 860 mm |
7. Height to cab upper part | 2950 mm | 7. Height to cab upper part | 3450 mm |
8. Rear platform swing radius | 2490 mm | 8. Rear platform swing radius | 3710 mm |
15. Counterweight ground clearance | 1001 mm | 15. Counterweight ground clearance | 1520 mm |
Carrier
6. Track width | 2600 mm | 6. Track width | 3300 mm |
14. Shoe dimensions | 600 mm | 14. Shoe dimensions | 900 mm |
Booms/sections features 1
1. Unit load-transfer length | 8580 mm | 1. Unit load-transfer length | 12270 mm |
11. Maximum radius along ground level | 9160 mm | 11. Maximum radius along ground level | 13000 mm |
3. Unit load-transfer height | 3110 mm | 3. Unit load-transfer height | 4950 mm |
13. Maximum excavation depth | 6490 mm | 13. Maximum excavation depth | 8530 mm |
9. Maximum cut height | 9130 mm | 9. Maximum cut height | 11200 mm |
10. Maximum loading height | 6400 mm | 10. Maximum loading height | 7340 mm |
12. Maximum vertical wall digging depth | 5690 mm | 12. Maximum vertical wall digging depth | 7390 mm |