- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 200 LC vs. Terex TXC140LC-1
John Deere 200 LC vs. Terex TXC140LC-1
26 reasons to buy John Deere 200 LC:
Swing device
Rotation speed | 13.9 rev / min and 12 rev / min | 14 % more or 1.9 rev |
Sizes
Clearance | 450 mm and 410 mm | 9 % more or 40 mm |
Counterweight ground clearance | 1030 mm and 920 mm | 11 % more or 110 mm |
Width to outside of caterpillar track | 3190 mm and 2600 mm | 18 % more or 590 mm |
Operation
Hydraulic system fluid volume | 199.9 l. and 165 l. | 17 % more or 34.9 l. |
Hydraulic system overflow valve pressure | 34335.9 kPa and 32336.4 kPa | 6 % more or 1999.5 kPa |
Hydraulic pump flow rate | 199.1 l/min and 232 l/min | 14 % less or 32.9 l/min |
Fuel Capacity | 302.8 l. and 230 l. | 24 % more or 72.8 l. |
Cooling system fluid volume | 28.4 l. and 22 l. | 23 % more or 6.4 l. |
Motor
Maximum torque | 578.9 Nm and 391.8 Nm | 32 % more or 187.1 Nm |
Effective power | 104.4 kW and 70.8 kW | 32 % more or 33.6 kW |
Power measured at | 2150 rev / min and 1850 rev / min | 14 % more or 300 rev |
Displacement | 6.8 l. and 5.8 l. | 15 % more or 1.0 l. |
Carrier
Support rollers number on either side | 2 and 1 | 50 % more or 1 |
Rolling bearings number on either side | 8 and 7 | 12 % more or 1 |
Specific ground pressure | 31.6 kPa and 35.2 kPa | 10 % less or 3.6 kPa |
Maximum travel speed | 5.1 km/h and 4.9 km/h | 4 % more or 0.2 km/h |
Track shoes number per side | 49 and 46 | 6 % more or 3 |
Booms/sections features 2
Maximum excavation depth | 6681.2 mm and 6120 mm | 8 % more or 561.2 mm |
Maximum radius along ground level | 9753.6 mm and 8600 mm | 12 % more or 1153.6 mm |
Maximum loading height | 6781.8 mm and 6530 mm | 4 % more or 251.8 mm |
Maximum vertical wall digging depth | 6044.2 mm and 5660 mm | 6 % more or 384.2 mm |
Booms/sections features 1
Maximum excavation depth | 5968 mm and 5630 mm | 6 % more or 338 mm |
Maximum radius along ground level | 9067.8 mm and 8100 mm | 11 % more or 967.8 mm |
Maximum loading height | 6400.8 mm and 6200 mm | 3 % more or 200.8 mm |
Maximum vertical wall digging depth | 5129.8 mm and 5070 mm | 1 % more or 59.8 mm |
1 reasons to buy Terex TXC140LC-1:
Motor
Torque measured at | 1850 rev / min and 1300 rev / min | 30 % more or 550 rev |
Neutral reasons:
Sizes
Rear platform swing radius | 2710 mm and 2200 mm |
Caterpillar track length on ground level | 3660 mm and 3035 mm |
Height to cab upper part | 2710 mm and 2830 mm |
Operation
Engine oil volume | 19 l. and 19 l. |
Operating voltage | 24 V and 24 V |
Working weight | 20298.3 kg and 13879.9 kg |
Motor
Aspiration | turbocharging and Turbocharged engine with the charge air intercooling by the liquid of the engine cooling system |
Cylinders number | 6 and 6 |
Manufacturer | John Deere and Daewoo |
Model | 6068T and DE58TIS |
Carrier
Shoe dimensions | 800 mm and 600 mm |
Track width | 2390 mm and 2000 mm |
Booms/sections features 2
Maximum cut height | 9601.2 mm and 8950 mm |
Booms/sections features 1
Unit load-transfer height | 3090 mm and 2830 mm |
Unit load-transfer length | 9620 mm and 7700 mm |
Maximum cut height | 9168.4 mm and 8620 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3190 mm | 2. Width to outside of caterpillar track | 2600 mm |
4. Caterpillar track length on ground level | 3660 mm | 4. Caterpillar track length on ground level | 3035 mm |
5. Clearance | 450 mm | 5. Clearance | 410 mm |
7. Height to cab upper part | 2710 mm | 7. Height to cab upper part | 2830 mm |
8. Rear platform swing radius | 2710 mm | 8. Rear platform swing radius | 2200 mm |
15. Counterweight ground clearance | 1030 mm | 15. Counterweight ground clearance | 920 mm |
Carrier
6. Track width | 2390 mm | 6. Track width | 2000 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
10. Maximum loading height | 6400.8 mm | 10. Maximum loading height | 6530 mm |
11. Maximum radius along ground level | 9067.8 mm | 11. Maximum radius along ground level | 8600 mm |
12. Maximum vertical wall digging depth | 5129.8 mm | 12. Maximum vertical wall digging depth | 5660 mm |
13. Maximum excavation depth | 5968 mm | 13. Maximum excavation depth | 6120 mm |
1. Unit load-transfer length | 9500 mm | 1. Unit load-transfer length | 7700 mm |
3. Unit load-transfer height | 2970 mm | 3. Unit load-transfer height | 2830 mm |
9. Maximum cut height | 9601.2 mm | 9. Maximum cut height | 8950 mm |