vs.

      John Deere 200D LC vs. Case CX330

      8 reasons to buy John Deere 200D LC:

      Swing device

      Rotation speed 13.3 rev / min and 9.6 rev / min 28 % more or 3.7 rev

      Operation

      Generator current strength 80 amperes and 50 amperes 37 % more or 30 amperes
      Hydraulic system overflow valve pressure 34335.9 kPa and 34301.4 kPa 0 % more or 34.5 kPa
      Boom reach drive mechanism fluid volume 6.2 l. and 6 l. 3 % more or 0.2 l.
      Hydraulic pump flow rate 424 l/min and 568 l/min 25 % less or 144 l/min

      Carrier

      Track shoes number per side 49 and 48 2 % more or 1
      Specific ground pressure 36.5 kPa and 51 kPa 28 % less or 14.5 kPa
      Hook traction force 202.9 kN and 271 kN 25 % less or 68.1 kN

      18 reasons to buy Case CX330:

      Sizes

      Width to outside of caterpillar track 3400 mm and 3190 mm 6 % more or 210 mm
      Clearance 480 mm and 450 mm 6 % more or 30 mm
      Counterweight ground clearance 1210 mm and 1031 mm 15 % more or 179 mm

      Shovel

      Maximum bucket volume 2.2 m3 and 1.1 m3 50 % more or 1.1 m3

      Operation

      Hydraulic system fluid volume 350 l. and 240 l. 31 % more or 110 l.
      Engine oil volume 36 l. and 23 l. 36 % more or 13 l.
      Fuel Capacity 580 l. and 400 l. 31 % more or 180 l.
      Cooling system fluid volume 30 l. and 26.1 l. 13 % more or 3.9 l.

      Motor

      Effective power 184.9 kW and 118.6 kW 36 % more or 66.3 kW
      Displacement 7.8 l. and 6.8 l. 13 % more or 1.0 l.

      Booms/sections features 2

      Maximum excavation depth 7340 mm and 6180 mm 16 % more or 1160 mm
      Maximum radius along ground level 10980 mm and 9250 mm 16 % more or 1730 mm
      Maximum loading height 7230 mm and 6830 mm 6 % more or 400 mm
      Maximum vertical wall digging depth 6350 mm and 5300 mm 17 % more or 1050 mm

      Booms/sections features 1

      Maximum excavation depth 8140 mm and 6680 mm 18 % more or 1460 mm
      Maximum radius along ground level 11720 mm and 9750 mm 17 % more or 1970 mm
      Maximum loading height 7540 mm and 7180 mm 5 % more or 360 mm
      Maximum vertical wall digging depth 7150 mm and 5990 mm 16 % more or 1160 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 2950 mm and 3070 mm
      Rear platform swing radius 2750 mm and 3450 mm
      Caterpillar track length on ground level 3670 mm and 4040 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 22673 kg and 35400 kg

      Motor

      Manufacturer John Deere and Isuzu
      Model 6068H and AH-6HKIX, III Level III certified
      Power measured at 2000 rev / min and 2000 rev / min
      Cylinders number 6 and 6
      Aspiration Turbocharger with charge air cooler by oncoming air flow and turbocharging

      Carrier

      Track width 2390 mm and 2590 mm
      Shoe dimensions 800 mm and 800 mm
      Support rollers number on either side 2 and 2
      Rolling bearings number on either side 8 and 8
      Maximum travel speed 5.5 km/h and 5.5 km/h

      Booms/sections features 2

      Unit load-transfer length 9600 mm and 11050 mm
      Maximum cut height 9670 mm and 10370 mm
      Unit load-transfer height 3180 mm and 3290 mm

      Booms/sections features 1

      Unit load-transfer height 2950 mm and 3510 mm
      Unit load-transfer length 9530 mm and 11090 mm
      Maximum cut height 10040 mm and 10670 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3190 mm 2. Width to outside of caterpillar track 3400 mm
      4. Caterpillar track length on ground level 3670 mm 4. Caterpillar track length on ground level 4040 mm
      5. Clearance 450 mm 5. Clearance 480 mm
      7. Height to cab upper part 2950 mm 7. Height to cab upper part 3070 mm
      8. Rear platform swing radius 2750 mm 8. Rear platform swing radius 3450 mm
      15. Counterweight ground clearance 1031 mm 15. Counterweight ground clearance 1210 mm

      Carrier

      6. Track width 2390 mm 6. Track width 2590 mm
      14. Shoe dimensions 800 mm 14. Shoe dimensions 800 mm

      Booms/sections features 1

      1. Unit load-transfer length 9600 mm 1. Unit load-transfer length 11130 mm
      3. Unit load-transfer height 3180 mm 3. Unit load-transfer height 3530 mm
      9. Maximum cut height 9670 mm 9. Maximum cut height 10320 mm
      10. Maximum loading height 6830 mm 10. Maximum loading height 7140 mm
      11. Maximum radius along ground level 9250 mm 11. Maximum radius along ground level 10470 mm
      12. Maximum vertical wall digging depth 5300 mm 12. Maximum vertical wall digging depth 5970 mm
      13. Maximum excavation depth 6180 mm 13. Maximum excavation depth 6730 mm