vs.

      John Deere 225C LC RTS vs. Komatsu PC1250SP-7

      7 reasons to buy John Deere 225C LC RTS:

      Swing device

      Rotation speed 13.3 rev / min and 5.5 rev / min 59 % more or 7.8 rev

      Operation

      Hydraulic system overflow valve pressure 34335.9 kPa and 34323.2 kPa 0 % more or 12.7 kPa
      Hydraulic pump flow rate 388 l/min and 988 l/min 61 % less or 600 l/min

      Motor

      Power measured at 2100 rev / min and 1800 rev / min 14 % more or 300 rev

      Carrier

      Specific ground pressure 37.7 kPa and 137.3 kPa 73 % less or 99.6 kPa
      Maximum travel speed 5.3 km/h and 3.2 km/h 40 % more or 2.1 km/h
      Track shoes number per side 49 and 48 2 % more or 1

      14 reasons to buy Komatsu PC1250SP-7:

      Sizes

      Clearance 990 mm and 440 mm 56 % more or 550 mm
      Counterweight ground clearance 1790 mm and 890 mm 50 % more or 900 mm
      Width to outside of caterpillar track 4600 mm and 3190 mm 31 % more or 1410 mm

      Operation

      Fuel Capacity 1360 l. and 270 l. 80 % more or 1090 l.
      Cooling system fluid volume 140 l. and 17 l. 88 % more or 123 l.
      Hydraulic system fluid volume 670 l. and 200 l. 70 % more or 470 l.
      Engine oil volume 56 l. and 22 l. 61 % more or 34 l.
      Boom reach drive mechanism fluid volume 24 l. and 4.5 l. 81 % more or 19.5 l.

      Motor

      Displacement 23.2 l. and 6.5 l. 72 % more or 16.7 l.

      Carrier

      Support rollers number on either side 3 and 2 33 % more or 1

      Booms/sections features 1

      Maximum excavation depth 7900 mm and 6100 mm 23 % more or 1800 mm
      Maximum radius along ground level 13670 mm and 9140 mm 33 % more or 4530 mm
      Maximum loading height 8450 mm and 7640 mm 10 % more or 810 mm
      Maximum vertical wall digging depth 5025 mm and 5000 mm 0 % more or 25 mm

      Neutral reasons:

      Sizes

      Rear platform swing radius 1680 mm and 4870 mm
      Caterpillar track length on ground level 2880 mm and 4995 mm
      Height to cab upper part 2074 mm and 3925 mm

      Operation

      Working weight 24240 kg and 106700 kg
      Operating voltage 24 V and 24 V
      Generator current strength 50 amperes and 50 amperes

      Motor

      Aspiration Turbocharger with charge air cooler by oncoming air flow and Turbocharging with subsequent air cooling (by a cooling radiator)
      Model AA-6BG1T and SAA6D170E-3
      Cylinders number 6 and 6
      Manufacturer Isuzu and Komatsu

      Carrier

      Rolling bearings number on either side 8 and 8
      Track width 2390 mm and 3900 mm
      Shoe dimensions 800 mm and 700 mm

      Booms/sections features 1

      Unit load-transfer length 9180 mm and 14790 mm
      Maximum cut height 10550 mm and 13000 mm
      Unit load-transfer height 3160 mm and 6265 mm

      Images

      Sizes

      8. Rear platform swing radius 1680 mm 8. Rear platform swing radius 4870 mm
      15. Counterweight ground clearance 890 mm 15. Counterweight ground clearance 1790 mm
      2. Width to outside of caterpillar track 3190 mm 2. Width to outside of caterpillar track 4600 mm
      4. Caterpillar track length on ground level 2880 mm 4. Caterpillar track length on ground level 4995 mm
      5. Clearance 440 mm 5. Clearance 990 mm
      7. Height to cab upper part 2074 mm 7. Height to cab upper part 3925 mm

      Carrier

      6. Track width 2390 mm 6. Track width 3900 mm
      14. Shoe dimensions 800 mm 14. Shoe dimensions 700 mm

      Booms/sections features 1

      9. Maximum cut height 11100 mm 9. Maximum cut height 13000 mm
      10. Maximum loading height 8190 mm 10. Maximum loading height 8450 mm
      11. Maximum radius along ground level 9810 mm 11. Maximum radius along ground level 13670 mm
      12. Maximum vertical wall digging depth 5920 mm 12. Maximum vertical wall digging depth 5025 mm
      13. Maximum excavation depth 6790 mm 13. Maximum excavation depth 7900 mm
      1. Unit load-transfer length 9180 mm 1. Unit load-transfer length 14790 mm
      3. Unit load-transfer height 3160 mm 3. Unit load-transfer height 6265 mm