- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 270D LC vs. Hitachi ZX450LC
John Deere 270D LC vs. Hitachi ZX450LC
10 reasons to buy John Deere 270D LC:
Swing device
Rotation speed | 12.6 rev / min and 9 rev / min | 29 % more or 3.6 rev |
Operation
Boom reach drive mechanism fluid volume | 7.6 l. and 6.5 l. | 14 % more or 1.1 l. |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
Specific ground pressure | 40.3 kPa and 76 kPa | 47 % less or 35.7 kPa |
Booms/sections features 2
Maximum excavation depth | 7910 mm and 7300 mm | 8 % more or 610 mm |
Maximum loading height | 7490 mm and 7040 mm | 6 % more or 450 mm |
Maximum vertical wall digging depth | 7030 mm and 4780 mm | 32 % more or 2250 mm |
Booms/sections features 1
Maximum excavation depth | 7260 mm and 5710 mm | 21 % more or 1550 mm |
Maximum radius along ground level | 10550 mm and 10310 mm | 2 % more or 240 mm |
Maximum vertical wall digging depth | 6110 mm and 4890 mm | 20 % more or 1220 mm |
20 reasons to buy Hitachi ZX450LC:
Sizes
Counterweight ground clearance | 1350 mm and 1180 mm | 13 % more or 170 mm |
Width to outside of caterpillar track | 3490 mm and 3390 mm | 3 % more or 100 mm |
Clearance | 738 mm and 510 mm | 31 % more or 228 mm |
Shovel
Bucket initial volume | 2.1 m3 and 1.3 m3 | 38 % more or 0.8 m3 |
Maximum bucket volume | 2.7 m3 and 1.6 m3 | 41 % more or 1.1 m3 |
Operation
Fuel Capacity | 650 l. and 500 l. | 23 % more or 150 l. |
Cooling system fluid volume | 61 l. and 29.9 l. | 51 % more or 31.1 l. |
Hydraulic system fluid volume | 510 l. and 240 l. | 53 % more or 270 l. |
Engine oil volume | 55 l. and 24.6 l. | 55 % more or 30.4 l. |
Hydraulic system overflow valve pressure | 34335.9 kPa and 34300 kPa | 0 % more or 35.9 kPa |
Hydraulic pump flow rate | 360 l/min and 472 l/min | 24 % less or 112 l/min |
Motor
Displacement | 15.7 l. and 6.8 l. | 57 % more or 8.9 l. |
Torque measured at | 1500 rev / min and 1400 rev / min | 7 % more or 100 rev |
Maximum torque | 1275 Nm and 813 Nm | 36 % more or 462 Nm |
Effective power | 234.1 kW and 140 kW | 40 % more or 94.1 kW |
Carrier
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Track shoes number per side | 53 and 49 | 8 % more or 4 |
Booms/sections features 2
Maximum radius along ground level | 11190 mm and 11120 mm | 1 % more or 70 mm |
Booms/sections features 1
Maximum loading height | 7220 mm and 7070 mm | 2 % more or 150 mm |
Neutral reasons:
Sizes
Rear platform swing radius | 2940 mm and 3500 mm |
Caterpillar track length on ground level | 4050 mm and 4470 mm |
Height to cab upper part | 3100 mm and 3380 mm |
Operation
Working weight | 28770 kg and 44800 kg |
Operating voltage | 24 V and 12 V |
Motor
Cylinders number | 6 and 6 |
Aspiration | Turbocharging with charge air cooler and turbocharging |
Manufacturer | John Deere and Isuzu |
Model | 6068H and AA-6WG1TQA |
Carrier
Shoe dimensions | 800 mm and 600 mm |
Maximum travel speed | 5.5 km/h and 5.5 km/h |
Track width | 2590 mm and 2890 mm |
Booms/sections features 2
Unit load-transfer height | 3350 mm and 3380 mm |
Unit load-transfer length | 10740 mm and 11820 mm |
Maximum cut height | 10460 mm and 10270 mm |
Booms/sections features 1
Unit load-transfer height | 3170 mm and 3380 mm |
Unit load-transfer length | 10340 mm and 11820 mm |
Maximum cut height | 10010 mm and 10750 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3390 mm | 2. Width to outside of caterpillar track | 3490 mm |
4. Caterpillar track length on ground level | 4050 mm | 4. Caterpillar track length on ground level | 4470 mm |
5. Clearance | 510 mm | 5. Clearance | 738 mm |
7. Height to cab upper part | 3100 mm | 7. Height to cab upper part | 3380 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 3500 mm |
15. Counterweight ground clearance | 1180 mm | 15. Counterweight ground clearance | 1350 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 2890 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
9. Maximum cut height | 10460 mm | 9. Maximum cut height | 10270 mm |
10. Maximum loading height | 7490 mm | 10. Maximum loading height | 7040 mm |
11. Maximum radius along ground level | 11120 mm | 11. Maximum radius along ground level | 11190 mm |
12. Maximum vertical wall digging depth | 7030 mm | 12. Maximum vertical wall digging depth | 4780 mm |
13. Maximum excavation depth | 7910 mm | 13. Maximum excavation depth | 7300 mm |
1. Unit load-transfer length | 10340 mm | 1. Unit load-transfer length | 11820 mm |
3. Unit load-transfer height | 3170 mm | 3. Unit load-transfer height | 3480 mm |


