- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 270D LC vs. Hitachi ZX870LCH-3
John Deere 270D LC vs. Hitachi ZX870LCH-3
10 reasons to buy John Deere 270D LC:
Swing device
Rotation speed | 12.6 rev / min and 7.3 rev / min | 42 % more or 5.3 rev |
Operation
Hydraulic pump flow rate | 472 l/min and 1056 l/min | 55 % less or 584 l/min |
Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
Motor
Power measured at | 2100 rev / min and 1800 rev / min | 14 % more or 300 rev |
Carrier
Specific ground pressure | 40.3 kPa and 121 kPa | 67 % less or 80.7 kPa |
Maximum travel speed | 5.5 km/h and 4.1 km/h | 25 % more or 1.4 km/h |
Booms/sections features 2
Maximum excavation depth | 7910 mm and 7820 mm | 1 % more or 90 mm |
Maximum vertical wall digging depth | 7030 mm and 6090 mm | 13 % more or 940 mm |
Booms/sections features 1
Maximum vertical wall digging depth | 6110 mm and 4100 mm | 33 % more or 2010 mm |
Maximum excavation depth | 7260 mm and 7140 mm | 2 % more or 120 mm |
21 reasons to buy Hitachi ZX870LCH-3:
Sizes
Width to outside of caterpillar track | 4100 mm and 3390 mm | 17 % more or 710 mm |
Clearance | 890 mm and 510 mm | 43 % more or 380 mm |
Counterweight ground clearance | 1680 mm and 1180 mm | 30 % more or 500 mm |
Shovel
Maximum bucket volume | 4.5 m3 and 1.6 m3 | 64 % more or 2.9 m3 |
Bucket initial volume | 3.5 m3 and 1.3 m3 | 63 % more or 2.2 m3 |
Operation
Fuel Capacity | 1120 l. and 500 l. | 55 % more or 620 l. |
Cooling system fluid volume | 116 l. and 29.9 l. | 74 % more or 86.1 l. |
Hydraulic system fluid volume | 790 l. and 240 l. | 70 % more or 550 l. |
Engine oil volume | 57 l. and 24.6 l. | 57 % more or 32.4 l. |
Boom reach drive mechanism fluid volume | 15 l. and 7.6 l. | 49 % more or 7.4 l. |
Motor
Effective power | 397 kW and 140 kW | 65 % more or 257 kW |
Displacement | 15.7 l. and 6.8 l. | 57 % more or 8.9 l. |
Torque measured at | 1600 rev / min and 1400 rev / min | 12 % more or 200 rev |
Maximum torque | 2250 Nm and 813 Nm | 64 % more or 1437 Nm |
Carrier
Track shoes number per side | 51 and 49 | 4 % more or 2 |
Support rollers number on either side | 3 and 2 | 33 % more or 1 |
Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
Booms/sections features 2
Maximum radius along ground level | 12510 mm and 11120 mm | 11 % more or 1390 mm |
Maximum loading height | 8180 mm and 7490 mm | 8 % more or 690 mm |
Booms/sections features 1
Maximum loading height | 8130 mm and 7070 mm | 13 % more or 1060 mm |
Maximum radius along ground level | 12020 mm and 10550 mm | 12 % more or 1470 mm |
Neutral reasons:
Sizes
Caterpillar track length on ground level | 4050 mm and 5110 mm |
Height to cab upper part | 3100 mm and 3780 mm |
Rear platform swing radius | 2940 mm and 4600 mm |
Operation
Hydraulic system overflow valve pressure | 34300 kPa and 34300 kPa |
Working weight | 28770 kg and 84000 kg |
Motor
Manufacturer | John Deere and Isuzu |
Model | 6068H and AH-6WG1XYSA-03 |
Aspiration | Turbocharging with charge air cooler and turbocharging |
Cylinders number | 6 and 6 |
Carrier
Shoe dimensions | 800 mm and 650 mm |
Track width | 2590 mm and 3450 mm |
Booms/sections features 2
Maximum cut height | 10460 mm and 12130 mm |
Booms/sections features 1
Maximum cut height | 10010 mm and 12010 mm |
Images
Sizes
2. Width to outside of caterpillar track | 3390 mm | 2. Width to outside of caterpillar track | 4100 mm |
4. Caterpillar track length on ground level | 4050 mm | 4. Caterpillar track length on ground level | 5110 mm |
5. Clearance | 510 mm | 5. Clearance | 890 mm |
7. Height to cab upper part | 3100 mm | 7. Height to cab upper part | 3780 mm |
8. Rear platform swing radius | 2940 mm | 8. Rear platform swing radius | 4600 mm |
15. Counterweight ground clearance | 1180 mm | 15. Counterweight ground clearance | 1680 mm |
Carrier
6. Track width | 2590 mm | 6. Track width | 3450 mm |
14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 650 mm |
Booms/sections features 1
13. Maximum excavation depth | 7910 mm | 13. Maximum excavation depth | 8870 mm |
9. Maximum cut height | 10010 mm | 9. Maximum cut height | 13000 mm |
1. Unit load-transfer length | 10340 mm | 1. Unit load-transfer length | 14770 mm |
10. Maximum loading height | 7070 mm | 10. Maximum loading height | 9080 mm |
3. Unit load-transfer height | 3170 mm | 3. Unit load-transfer height | 4570 mm |
11. Maximum radius along ground level | 10550 mm | 11. Maximum radius along ground level | 13820 mm |
12. Maximum vertical wall digging depth | 6110 mm | 12. Maximum vertical wall digging depth | 6840 mm |