- Home/
- Comparison/
- Hydraulic Shovel/
- John Deere 350D LC vs. Hitachi EX270LC-5
John Deere 350D LC vs. Hitachi EX270LC-5
25 reasons to buy John Deere 350D LC:
Swing device
| Rotation speed | 10.7 rev / min and 10.6 rev / min | 1 % more or 0.1 rev |
Sizes
| Width to outside of caterpillar track | 3390 mm and 3190 mm | 6 % more or 200 mm |
Shovel
| Bucket initial volume | 1.8 m3 and 1.1 m3 | 39 % more or 0.7 m3 |
| Maximum bucket volume | 2.1 m3 and 1.6 m3 | 24 % more or 0.5 m3 |
Operation
| Fuel Capacity | 630 l. and 380 l. | 40 % more or 250 l. |
| Generator current strength | 80 amperes and 50 amperes | 37 % more or 30 amperes |
| Cooling system fluid volume | 39.7 l. and 23 l. | 42 % more or 16.7 l. |
| Hydraulic system fluid volume | 340 l. and 230 l. | 32 % more or 110 l. |
| Engine oil volume | 27 l. and 26 l. | 4 % more or 1 l. |
Motor
| Effective power | 202 kW and 125.3 kW | 38 % more or 76.7 kW |
| Displacement | 9 l. and 6.7 l. | 26 % more or 2.3 l. |
| Maximum torque | 1399 Nm and 657 Nm | 53 % more or 742 Nm |
Carrier
| Specific ground pressure | 49.4 kPa and 51 kPa | 3 % less or 1.6 kPa |
Booms/sections features 3
| Maximum excavation depth | 8180 mm and 7880 mm | 4 % more or 300 mm |
| Maximum radius along ground level | 11670 mm and 11120 mm | 5 % more or 550 mm |
| Maximum loading height | 7630 mm and 7330 mm | 4 % more or 300 mm |
| Maximum vertical wall digging depth | 7270 mm and 6770 mm | 7 % more or 500 mm |
Booms/sections features 2
| Maximum loading height | 7240 mm and 7070 mm | 2 % more or 170 mm |
| Maximum excavation depth | 7380 mm and 7230 mm | 2 % more or 150 mm |
| Maximum radius along ground level | 10890 mm and 10520 mm | 3 % more or 370 mm |
| Maximum vertical wall digging depth | 6420 mm and 6110 mm | 5 % more or 310 mm |
Booms/sections features 1
| Maximum excavation depth | 6840 mm and 6540 mm | 4 % more or 300 mm |
| Maximum radius along ground level | 10360 mm and 9860 mm | 5 % more or 500 mm |
| Maximum loading height | 6940 mm and 6750 mm | 3 % more or 190 mm |
| Maximum vertical wall digging depth | 5510 mm and 5280 mm | 4 % more or 230 mm |
8 reasons to buy Hitachi EX270LC-5:
Operation
| Boom reach drive mechanism fluid volume | 17 l. and 11.8 l. | 31 % more or 5.2 l. |
| Hydraulic system overflow valve pressure | 34335.9 kPa and 34300 kPa | 0 % more or 35.9 kPa |
| Hydraulic pump flow rate | 418 l/min and 576 l/min | 27 % less or 158 l/min |
Motor
| Power measured at | 2050 rev / min and 1900 rev / min | 7 % more or 150 rev |
| Torque measured at | 1600 rev / min and 1300 rev / min | 19 % more or 300 rev |
Carrier
| Track shoes number per side | 50 and 48 | 4 % more or 2 |
| Rolling bearings number on either side | 9 and 8 | 11 % more or 1 |
| Maximum travel speed | 5.1 km/h and 5 km/h | 2 % more or 0.1 km/h |
Neutral reasons:
Sizes
| Rear platform swing radius | 3370 mm and 2940 mm |
| Clearance | 500 mm and 500 mm |
| Caterpillar track length on ground level | 4050 mm and 4010 mm |
| Counterweight ground clearance | 1160 mm and 1160 mm |
| Height to cab upper part | 3140 mm and 3030 mm |
Operation
| Working weight | 35367 kg and 26703 kg |
Motor
| Manufacturer | John Deere and Hino |
| Model | 6090H and H07C-TD |
| Aspiration | Turbocharging with charge air cooler and turbocharging |
| Cylinders number | 6 and 6 |
Carrier
| Track width | 2590 mm and 2590 mm |
| Shoe dimensions | 800 mm and 600 mm |
| Support rollers number on either side | 2 and 2 |
Booms/sections features 3
| Unit load-transfer height | 3600 mm and 3350 mm |
| Unit load-transfer length | 11090 mm and 10310 mm |
| Maximum cut height | 10750 mm and 10240 mm |
Booms/sections features 2
| Unit load-transfer height | 3270 mm and 3170 mm |
| Unit load-transfer length | 11000 mm and 10290 mm |
| Maximum cut height | 10360 mm and 9980 mm |
Booms/sections features 1
| Unit load-transfer height | 3470 mm and 3420 mm |
| Unit load-transfer length | 11130 mm and 10370 mm |
| Maximum cut height | 9990 mm and 9640 mm |
Images
Sizes
| 2. Width to outside of caterpillar track | 3390 mm | 2. Width to outside of caterpillar track | 3190 mm |
| 4. Caterpillar track length on ground level | 4050 mm | 4. Caterpillar track length on ground level | 4010 mm |
| 5. Clearance | 500 mm | 5. Clearance | 500 mm |
| 7. Height to cab upper part | 3140 mm | 7. Height to cab upper part | 3030 mm |
| 8. Rear platform swing radius | 3370 mm | 8. Rear platform swing radius | 2940 mm |
| 15. Counterweight ground clearance | 1160 mm | 15. Counterweight ground clearance | 1160 mm |
Carrier
| 6. Track width | 2590 mm | 6. Track width | 2590 mm |
| 14. Shoe dimensions | 800 mm | 14. Shoe dimensions | 600 mm |
Booms/sections features 1
| 11. Maximum radius along ground level | 10890 mm | 11. Maximum radius along ground level | 10520 mm |
| 12. Maximum vertical wall digging depth | 5510 mm | 12. Maximum vertical wall digging depth | 6110 mm |
| 13. Maximum excavation depth | 6840 mm | 13. Maximum excavation depth | 7230 mm |
| 1. Unit load-transfer length | 11000 mm | 1. Unit load-transfer length | 10310 mm |
| 3. Unit load-transfer height | 3270 mm | 3. Unit load-transfer height | 3350 mm |
| 9. Maximum cut height | 10360 mm | 9. Maximum cut height | 10240 mm |
| 10. Maximum loading height | 7240 mm | 10. Maximum loading height | 7330 mm |