vs.

      John Deere 450C LC vs. Doosan DX300LC

      26 reasons to buy John Deere 450C LC:

      Sizes

      Clearance 735 mm and 500 mm 32 % more or 235 mm
      Width to outside of caterpillar track 3640 mm and 3200 mm 12 % more or 440 mm
      Counterweight ground clearance 1350 mm and 1175 mm 13 % more or 175 mm

      Shovel

      Maximum bucket volume 5 m3 and 1.8 m3 64 % more or 3.2 m3

      Operation

      Hydraulic pump flow rate 378.5 l/min and 494 l/min 23 % less or 115.5 l/min
      Engine oil volume 42 l. and 36 l. 14 % more or 6 l.
      Boom reach drive mechanism fluid volume 6.5 l. and 6 l. 8 % more or 0.5 l.
      Fuel Capacity 647.3 l. and 500 l. 23 % more or 147.3 l.
      Cooling system fluid volume 50 l. and 35 l. 30 % more or 15 l.

      Motor

      Effective power 235.6 kW and 146.9 kW 38 % more or 88.7 kW
      Displacement 12.5 l. and 7.6 l. 39 % more or 4.9 l.
      Maximum torque 1294.8 Nm and 911 Nm 30 % more or 383.8 Nm

      Carrier

      Track shoes number per side 53 and 48 9 % more or 5
      Maximum travel speed 5.5 km/h and 5.1 km/h 7 % more or 0.4 km/h
      Support rollers number on either side 3 and 2 33 % more or 1

      Booms/sections features 3

      Maximum excavation depth 8254 mm and 8010 mm 3 % more or 244 mm
      Maximum radius along ground level 12268.2 mm and 11085 mm 10 % more or 1183.2 mm
      Maximum loading height 7772.4 mm and 7365 mm 5 % more or 407.4 mm
      Maximum vertical wall digging depth 7034.8 mm and 6670 mm 5 % more or 364.8 mm

      Booms/sections features 2

      Maximum excavation depth 7748 mm and 7360 mm 5 % more or 388 mm
      Maximum radius along ground level 11811 mm and 10550 mm 11 % more or 1261 mm
      Maximum loading height 7671.8 mm and 7260 mm 5 % more or 411.8 mm
      Maximum vertical wall digging depth 6653.8 mm and 6190 mm 7 % more or 463.8 mm

      Booms/sections features 1

      Maximum loading height 7034.8 mm and 6930 mm 1 % more or 104.8 mm
      Maximum excavation depth 7263.4 mm and 6760 mm 7 % more or 503.4 mm
      Maximum radius along ground level 11149.6 mm and 9965 mm 11 % more or 1184.6 mm

      11 reasons to buy Doosan DX300LC:

      Swing device

      Rotation speed 9.9 rev / min and 9 rev / min 9 % more or 0.9 rev

      Operation

      Hydraulic system fluid volume 330 l. and 280.1 l. 15 % more or 49.9 l.
      Generator current strength 50 amperes and 45 amperes 10 % more or 5 amperes
      Hydraulic system overflow valve pressure 32400 kPa and 30405.9 kPa 6 % more or 1994.1 kPa

      Motor

      Power measured at 1900 rev / min and 1800 rev / min 5 % more or 100 rev

      Carrier

      Specific ground pressure 55.8 kPa and 62.9 kPa 11 % less or 7.1 kPa

      Booms/sections features 4

      Maximum radius along ground level 17405 mm and 13182.6 mm 24 % more or 4222.4 mm
      Maximum loading height 11930 mm and 8763 mm 27 % more or 3167 mm
      Maximum vertical wall digging depth 11630 mm and 8458.2 mm 27 % more or 3171.8 mm
      Maximum excavation depth 13875 mm and 9119.6 mm 34 % more or 4755.4 mm

      Booms/sections features 1

      Maximum vertical wall digging depth 5405 mm and 5334 mm 1 % more or 71 mm

      Neutral reasons:

      Sizes

      Height to cab upper part 3280 mm and 3065 mm
      Rear platform swing radius 3480 mm and 3200 mm
      Caterpillar track length on ground level 4470 mm and 4010 mm

      Operation

      Operating voltage 24 V and 24 V
      Working weight 46520.4 kg and 29299.3 kg

      Motor

      Torque measured at 1300 rev / min and 1300 rev / min
      Manufacturer John Deere and Doosan
      Model 6125H and DL08
      Aspiration turbocharging and Turbocharged engine with intermediate cooling of charging air by oncoming air flow
      Cylinders number 6 and 6

      Carrier

      Rolling bearings number on either side 9 and 9
      Shoe dimensions 750 mm and 600 mm

      Booms/sections features 4

      Maximum cut height 11862.8 mm and 14155 mm
      Unit load-transfer height 4660 mm and 3455 mm
      Unit load-transfer length 11730 mm and 14370 mm

      Booms/sections features 3

      Unit load-transfer height 3480 mm and 3475 mm
      Unit load-transfer length 11920 mm and 10660 mm
      Maximum cut height 11177 mm and 10410 mm

      Booms/sections features 2

      Unit load-transfer length 11920 mm and 10620 mm
      Unit load-transfer height 3480 mm and 3345 mm
      Maximum cut height 11073.4 mm and 10330 mm

      Booms/sections features 1

      Unit load-transfer height 3600 mm and 3475 mm
      Unit load-transfer length 11910 mm and 10740 mm
      Maximum cut height 10262.6 mm and 9970 mm

      Images

      Sizes

      2. Width to outside of caterpillar track 3640 mm 2. Width to outside of caterpillar track 3200 mm
      4. Caterpillar track length on ground level 4470 mm 4. Caterpillar track length on ground level 4010 mm
      5. Clearance 735 mm 5. Clearance 500 mm
      7. Height to cab upper part 3280 mm 7. Height to cab upper part 3065 mm
      8. Rear platform swing radius 3480 mm 8. Rear platform swing radius 3200 mm
      15. Counterweight ground clearance 1350 mm 15. Counterweight ground clearance 1175 mm

      Carrier

      14. Shoe dimensions 750 mm 14. Shoe dimensions 600 mm

      Booms/sections features 1

      9. Maximum cut height 10896.6 mm 9. Maximum cut height 9970 mm
      3. Unit load-transfer height 3480 mm 3. Unit load-transfer height 3475 mm
      11. Maximum radius along ground level 10591.8 mm 11. Maximum radius along ground level 17405 mm
      10. Maximum loading height 7339.6 mm 10. Maximum loading height 6930 mm
      12. Maximum vertical wall digging depth 7034.8 mm 12. Maximum vertical wall digging depth 6670 mm
      13. Maximum excavation depth 6224 mm 13. Maximum excavation depth 13875 mm
      1. Unit load-transfer length 11910 mm 1. Unit load-transfer length 10740 mm